Advanced vehicle automation - Keyeless automation

1#include <ESP8266WiFi.h>
2
3//Name of the wifi network whom we are  supposed to track
4const char *SSID = "mr_lazy_boei";
5const char *pass =  "usalusal";
6
7WiFiClient client;
8
9// Relay pin number
10int relay=0;
11int  relay3=12;
12
13
14
15for (int network = 0; network < available_networks; network++)  {
16if (WiFi.SSID(network).compareTo(target_ssid) == 0) { //stringOne.compareTo  1(stringTwo) < 0
17return WiFi.RSSI(network);
18}
19
20}
21return 0;
22}
23
24void  setup() {
25Serial.begin(115200);
26delay(10);
27
28Serial.println("Connecting  to ");
29Serial.println(SSID);
30
31WiFi.begin(SSID,pass);
32while(WiFi.status()  !=WL_CONNECTED)
33{
34delay(500);
35Serial.print(".");
36}
37Serial.println("");
38Serial.println("WiFi  connected");
39int32_t rssi = getRSSI(SSID);
40
41// For debugging purpose only
42Serial.print("Signal  strength: ");
43Serial.print(rssi);
44Serial.println("dBm");
45
46pinMode(relay,  OUTPUT); // Initialize the relay pin as an output.
47pinMode(relay3,OUTPUT);
48
49
50}
51void  loop(){
52
53int32_t rssi = getRSSI(SSID);
54
55// For debugging purpose only
56Serial.print("Signal  strength: ");
57Serial.print(rssi);
58Serial.println("dBm");
59
60if (rssi  > (-65) && rssi != 0) // if rssi is greater then -70 dbm or it’s 0 dbm, then the  light will turn
61{
62digitalWrite(relay3, LOW);
63Serial.println("ON");
64
65}
66if  (rssi < (-65) && rssi != 0)
67
68{
69digitalWrite(relay3,HIGH);
70Serial.println("OFF");
71ESP.restart();
72}
73if  (rssi < (-100) && rssi != 0)
74{
75  ESP.restart();
76}
77
78}