Social Media Without the Internet

1 #include <LedControl.h>
2#include <Adafruit_NeoPixel.h>
3
4#define  PIXEL_PIN    6    // Digital IO pin connected to the NeoPixels.
5#define PIXEL_COUNT  46
6
7int DIN = 12;
8int CS =  11;
9int CLK = 10;
10int count = 0;
11String  number = "";
12long a = random(50, 255);
13char Array[2];
14byte one[8] =     {0x18,  0x28, 0x8, 0x8, 0x8, 0x8, 0x8, 0x3e};
15byte two[8] =     {0x1c, 0x22, 0x2, 0x2,  0x1c, 0x20, 0x20, 0x3e};
16byte three[8] =   {0x1c, 0x22, 0x2, 0x2, 0x1e, 0x2,  0x22, 0x1c};
17byte four[8] =    {0xc, 0x14, 0x24, 0x44, 0x7f, 0x4, 0x4, 0x4};
18byte  five[8] =    {0x7e, 0x40, 0x40, 0x78, 0xe, 0x2, 0x2, 0x7c};
19byte six[8] =     {0x3c,  0x42, 0x40, 0x40, 0x7c, 0x42, 0x42, 0x3c};
20byte seven[8] =   {0x7e, 0x2, 0x2,  0x4, 0x8, 0x10, 0x10, 0x10};
21byte eight[8] =   {0x3c, 0x42, 0x42, 0x3c, 0x66,  0x42, 0x42, 0x3c};
22byte nine[8] =    {0x3c, 0x42, 0x42, 0x42, 0x3e, 0x2, 0x42,  0x3c};
23byte zero[8] =    {0x3c, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x3c};
24byte  smile[8] =   {0x3C, 0x42, 0xA5, 0x81, 0xA5, 0x99, 0x42, 0x3C};
25byte sad[8] =   {0xff, 0x81, 0xa5, 0x81, 0x99, 0xa5, 0x81, 0xff};
26
27bool smile_sw = false;
28
29LedControl  lc = LedControl(DIN, CLK, CS, 2); // Pins: DIN,CLK,CS, amount of display connected
30Adafruit_NeoPixel  strip = Adafruit_NeoPixel(PIXEL_COUNT, PIXEL_PIN, NEO_GRB + NEO_KHZ800);
31
32const  int unFriend_pin = 4;     // the number of the pushbutton pin
33const int addFriend_pin  = 5;  //the number of rings switch
34const int ledPin =  13;      // the number  of the LED pin
35int buttonState = 0;
36int ringState = 0;
37int oldState = 0;
38int  oldRingState = 0;
39int showType = 0;
40
41void setup() {
42  Serial.begin(9600);
43  lc.shutdown(0, false);      //The MAX72XX is in power-saving mode on startup
44  lc.setIntensity(0, 1);     // Set the brightness to maximum value. scale is 0-15;  15 is the brightest
45  lc.clearDisplay(0);         // and clear the display
46
47  lc.shutdown(1, false);      //The MAX72XX is in power-saving mode on startup
48  lc.setIntensity(1, 1);     // Set the brightness to maximum value. scale is 0-15;  15 is the brightest
49  lc.clearDisplay(1);         // and clear the display
50
51  pinMode(ledPin, OUTPUT);
52  // initialize the pushbutton pin as an input:
53  pinMode(unFriend_pin, INPUT);
54  strip.begin();
55  strip.show(); // Initialize  all pixels to 'off'
56
57}
58
59void loop() {
60
61  buttonState = digitalRead(unFriend_pin);
62  ringState = digitalRead(addFriend_pin);
63  Serial.print("unfreinds x ");
64  Serial.print(buttonState + " add freinds x ");
65  Serial.println(addFriend_pin);
66  // Get current button state.
67  int newState = digitalRead(unFriend_pin);
68  int newRingState = digitalRead(addFriend_pin);
69  // Check if state changed  from high to low (button press).
70  //  if (newState >= 830 && oldState < 830)  { //if analogRead
71  if (newState == HIGH && oldState == LOW) {
72    // Short  delay to debounce button.
73    delay(20);
74    // Check if button is still low  after debounce.
75    newState = digitalRead(unFriend_pin);
76
77    //    if  (newState >=830) {  //if analogRead
78    if (newState == HIGH) {
79      showType  = 10;
80      count--;
81      if (count <= 0) {
82        count = 0;
83      }
84      printFir_Byte(sad);
85      printSec_Byte(sad);
86      startShow(showType);
87      showNum();
88
89      digitalWrite(ledPin, HIGH);
90      delay(250);
91    }
92
93  }
94  if (newRingState == HIGH && oldRingState == LOW) {
95    //  Short delay to debounce button.
96    delay(20);
97    newRingState = digitalRead(addFriend_pin);
98    if (newRingState == HIGH) {
99      showType++;
100      count++;
101      if  (showType > 9) {
102        showType = 0;
103      }
104      a = random(50, 255);
105      Serial.println(a);
106      printFir_Byte(smile);
107      printSec_Byte(smile);
108      startShow(showType);
109      showNum();
110
111      digitalWrite(ledPin,  HIGH);
112      delay(250);
113    }
114
115  }
116
117  // Set the last button  state to the old state.
118  oldState = newState;
119  oldRingState = newRingState;
120  //  lc.clearDisplay(0);
121
122
123}
124
125void startShow(int i) {
126  switch  (i) {
127    case 1: theaterChase(strip.Color(a,   0,   0), 50);  // Green
128      break;
129    case 2: theaterChase(strip.Color(0,   a,   0), 50); // Blue
130      break;
131    case 3: theaterChase(strip.Color(0,   0,   a), 50);  // light blue
132      break;
133    case 4: theaterChase(strip.Color(0,  100,   a), 50);  // mint
134      break;
135    case 5: theaterChase(strip.Color(0,   a,   100), 50);// warm yellow
136      break;
137    case 6: theaterChase(strip.Color(a,   100,   0), 50); // violet
138      break;
139    case 7: theaterChase(strip.Color( 100,   a, 100), 50); // christmas green
140      break;
141    case 8: theaterChase(strip.Color(0,   50,   a), 50); // dark  red
142      break;
143    case 9: theaterChase(strip.Color(50,   a,   0), 50);  // super hero blue
144      break;
145    case 0: theaterChase(strip.Color(a,   0,   50), 50); // bright red
146      break;
147    case 10: theaterChase(strip.Color(255,   0,   0), 50); // super hero blue
148      break;
149  }
150  Serial.println(i);
151  strip.show();
152}
153
154void showNum() {
155  char Array[2];
156  if (count  <= 99) {
157    dtostrf(count, 2, 0, Array);
158  } else {
159    count = 0;
160    dtostrf(count, 2, 0, Array);
161  }
162  Serial.print(Array[0]);
163  Serial.print("  , ");
164  Serial.println(Array[1]);
165  if (Array[0] == ' ') {
166    printFir_Byte(zero);
167  } else if (Array[0] == '1') {
168    printFir_Byte(one);
169  } else if (Array[0]  == '2') {
170    printFir_Byte(two);
171  } else if (Array[0] == '3') {
172    printFir_Byte(three);
173  } else if (Array[0] == '4') {
174    printFir_Byte(four);
175  } else if (Array[0]  == '5') {
176    printFir_Byte(five);
177  } else if (Array[0] == '6') {
178    printFir_Byte(six);
179  } else if (Array[0] == '7') {
180    printFir_Byte(seven);
181  } else if (Array[0]  == '8') {
182    printFir_Byte(eight);
183  } else if (Array[0] == '9') {
184    printFir_Byte(nine);
185  } else if (Array[0] == '0') {
186    printFir_Byte(zero);
187  }
188
189
190  if  (Array[1] == '1') {
191    printSec_Byte(one);
192  } else if (Array[1] == '2')  {
193    printSec_Byte(two);
194  } else if (Array[1] == '3') {
195    printSec_Byte(three);
196  } else if (Array[1] == '4') {
197    printSec_Byte(four);
198  } else if (Array[1]  == '5') {
199    printSec_Byte(five);
200  } else if (Array[1] == '6') {
201    printSec_Byte(six);
202  } else if (Array[1] == '7') {
203    printSec_Byte(seven);
204  } else if (Array[1]  == '8') {
205    printSec_Byte(eight);
206  } else if (Array[1] == '9') {
207    printSec_Byte(nine);
208  } else if (Array[1] == '0') {
209    printSec_Byte(zero);
210  }
211
212}
213
214void  printFir_Byte(byte fir_char[])
215{
216  int i = 0;
217  for (i = 0; i < 8; i++)
218  {
219    lc.setRow(0, i, fir_char[i]);
220  }
221}
222
223
224void printSec_Byte(byte  sec_char [])
225{
226  int i = 0;
227  for (i = 0; i < 8; i++)
228  {
229    lc.setRow(1,  i, sec_char[i]);
230  }
231}
232
233//Theatre-style crawling lights.
234void theaterChase(uint32_t  c, uint8_t wait) {
235  for (int j = 0; j < 10; j++) { //do 10 cycles of chasing
236    for (int q = 0; q < 3; q++) {
237      for (int i = 0; i < strip.numPixels();  i = i + 3) {
238        strip.setPixelColor(i + q, c);  //turn every third pixel  on
239      }
240      strip.show();
241      delay(wait);
242      for (int i =  0; i < strip.numPixels(); i = i + 3) {
243        strip.setPixelColor(i + q, 0);      //turn every third pixel off
244
245      }
246    }
247  }
248}
249
250//  Input a value 0 to 255 to get a color value.
251// The colours are a transition  r - g - b - back to r.
252uint32_t Wheel(byte WheelPos) {
253  WheelPos = 255 -  WheelPos;
254  if (WheelPos < 85) {
255    return strip.Color(255 - WheelPos * 3,  0, WheelPos * 3);
256  }
257  if (WheelPos < 170) {
258    WheelPos -= 85;
259    return  strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
260  }
261  WheelPos -= 170;
262  return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
263}
264

1import processing.io.SPI;
2
3// MCP3008 is a Analog-to-Digital converter   using SPI
4// other than the MCP3001, this has 8 input channels
5// datasheet:   http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf
6
7class MCP3008   extends SPI {
8
9  MCP3008(String dev) {
10    super(dev);
11    settings(500000,   SPI.MSBFIRST, SPI.MODE0);
12  }
13
14  float getAnalog(int channel) {
15    if   (channel < 0 ||  7 < channel) {
16      System.err.println("The channel needs   to be from 0 to 7");
17      throw new IllegalArgumentException("Unexpected channel");
18     }
19    byte[] out = { 0, 0, 0 };
20    // encode the channel number in the   first byte
21    out[0] = (byte)(0x18 | channel);
22    byte[] in = transfer(out);
23     int val = ((in[1] & 0x03) << 8) | (in[2] & 0xff);
24    // val is between 0   and 1023
25    return val/1023.0;
26  }
27}

1#!/usr/bin/python
2# Example using a character LCD connected to a Raspberry   Pi or BeagleBone Black.
3import time
4import Adafruit_CharLCD as LCD
5from   ScrollLCD import*
6#-----#
7import Adafruit_GPIO.SPI as SPI
8import MCP3008
9#-----#
10from   neopixel import *
11import argparse
12import signal
13import sys
14
15# Raspberry   Pi pin configuration:
16# Note this might need to be changed to 21 for older revision   Pi's.
17lcd_rs        = 27 #26
18lcd_en        = 22 #19
19lcd_d4        = 25   #13
20lcd_d5        = 24 #6
21lcd_d6        = 23 #5
22lcd_d7        = 17 #11
23lcd_backlight   = 4
24
25# Define LCD column and row size for 16x2 LCD.
26lcd_columns = 16
27lcd_rows     = 2
28#Hardware SPI configuration:
29SPI_PORT   = 0
30SPI_DEVICE = 0
31mcp   = MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE))
32
33# Initialize the   LCD using the pins above.
34lcd = LCD.Adafruit_CharLCD(lcd_rs, lcd_en, lcd_d4,   lcd_d5, lcd_d6, lcd_d7,
35                           lcd_columns, lcd_rows, lcd_backlight)
36
37def   signal_handler(signal, frame):
38        colorWipe(strip, Color(0,0,0))
39        sys.exit(0)
40
41def   opt_parse():
42        parser = argparse.ArgumentParser()
43        parser.add_argument('-c',   action='store_true', help='clear the display on exit')
44        args = parser.parse_args()
45         if args.c:
46                signal.signal(signal.SIGINT, signal_handler)
47
48def   wheel(pos):
49        """Generate rainbow colors across 0-255 positions."""
50         if pos < 85:
51                return Color(pos * 3, 255 - pos * 3, 0)
52         elif pos < 170:
53                pos -= 85
54                return Color(255   - pos * 3, 0, pos * 3)
55        else:
56                pos -= 170
57                return   Color(0, pos * 3, 255 - pos * 3)
58
59# LED strip configuration:
60LED_COUNT       = 48      # Number of LED pixels.
61LED_PIN        = 18      # GPIO pin connected   to the pixels (18 uses PWM!).
62#LED_PIN        = 10      # GPIO pin connected   to the pixels (10 uses SPI /dev/spidev0.0).
63LED_FREQ_HZ    = 800000  # LED signal   frequency in hertz (usually 800khz)
64LED_DMA        = 10      # DMA channel to   use for generating signal (try 10)
65LED_BRIGHTNESS = 255     # Set to 0 for darkest   and 255 for brightest
66LED_INVERT     = False   # True to invert the signal (when   using NPN transistor level shift)
67LED_CHANNEL    = 0       # set to '1' for GPIOs   13, 19, 41, 45 or 53
68LED_STRIP      = ws.WS2811_STRIP_GRB   # Strip type and   colour ordering
69#LED_STRIP      = ws.WS2812_STRIP
70
71LED_i =0
72light =   True
73aftertouch=False
74count=0
75aftertap=False
76following=0
77
78def   tuang(strip,wait_ms=20,iterations=1):
79        """Draw 1 pixel at a time."""
80         for j in range(1):
81                print(j)
82                for i   in range(strip.numPixels()):
83                        strip.setPixelColor(strip.numPixels()-i,   wheel((int(i * 256 / strip.numPixels())+j) & 255))
84                        strip.show()
85                         time.sleep(0.05)
86                        # strip.show()
87                         # time.sleep(0.05)
88                for i in range(strip.numPixels()):
89                         strip.setPixelColor(strip.numPixels()-i, 0)
90                        strip.show()
91                         time.sleep(wait_ms/1000.0)
92                        LED_i   = i
93                        print(LED_i)
94
95#text="Hi! I'm Tuang.  I do   cool things."
96#breaker=False
97#n = 16
98#rows = [text[i:i+n] for i in range(0,   len(text), n)]
99#n_rows = len(rows)
100#scroll(lcd,text,False,False,1)
101
102print('Reading   MCP3008 values, press Ctrl-C to quit...')
103# Print nice channel column headers.
104print('|   {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*range(8)))
105print('-'   * 57)
106
107# Main program logic follows:
108if __name__ == '__main__':
109    #Process   arguments
110    opt_parse()
111    # Create NeoPixel object with appropriate configuration.
112     strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT,   LED_BRIGHTNESS, LED_CHANNEL, LED_STRIP)
113    #Intialize the library (must be called   once before other functions)
114    strip.begin()
115    while True:
116        #Read   all the ADC channel values in a list.
117        values = [0]*8
118        for i   in range(8):
119                #The read_adc function will get the value of the   specified channel (0-7).
120                values[i] = mcp.read_adc(i)
121                #Pause   for half a second.
122        print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4}   | {5:>4} | {6:>4} | {7:>4} |'.format(*values))
123        time.sleep(0.2)
124        #lcd.clear()
125         if values[1]>800:
126            if aftertouch:
127                    count=count+1
128                     lcd.clear()
129                    lcd.message('following: '+str(following))
130                     lcd.message('\
131followers: '+str(count)+'     ')
132                    #scroll(lcd,text,count,breaker,False,False,0)
133                     aftertouch=False
134        else:
135            aftertouch=True
136             #scroll(lcd,text,count,breaker,False,False,0)
137            lcd.message('following:   '+str(following))
138            lcd.message('\
139followers: '+str(count)+'     ')
140         if values[2]>600:
141            if aftertap:
142                    #print('sholder   tap!')
143                    following=following+1
144                    lcd.clear()
145                     lcd.message('following: '+str(following))
146                    lcd.message('\
147followers:   '+str(count)+'     ')
148                    #scroll(lcd,text,count,breaker,False,False,0)
149                     aftertap=False
150        else:
151            aftertap=True
152             #scroll(lcd,text,count,breaker,False,False,0)
153            lcd.message('following:   '+str(following))
154            lcd.message('\
155followers: '+str(count)+'     ')
156         if values[0]>600:
157            print("Hi5!")
158            light=True
159         else:
160            light=False
161        if light:
162            tuang(strip)
163             light=False
164        else:
165            for i in range(strip.numPixels()):
166                 strip.setPixelColor(i,0)
167            strip.show()
168        #for   x in range(n_rows):
169         #       lcd.home()
170          #      lcd.clear()
171            #     nxt = x + 1
172            #    lcd.message(rows[x])
173             #    lcd.message('\
174Follower:'+str(count)+'     ') #space 3 times to avoid any char   on the first row drops
175              #  if nxt == n_rows:
176               #          sleep(2)
177                        #break
178                #else:
179                  #       lcd.message(rows[nxt])
180                  #      sleep(1)
181

1import processing.io.*;
2MCP3008 adc;
3PFont font;
4int count=0;
5boolean   readytoHit=true;
6boolean debugging =false;
7int scale =2;
8color[] colors;
9float   a, b;
10int startTime;
11int totalTime=3000;
12int currentTime;
13boolean glitch=false;
14int   smile=0, laugh=0, cry=0, kiss=0, confused=0;
15void settings() {
16  if (debugging)   {
17    size(800/scale, 480/scale);
18  } else {
19    fullScreen(0);
20  }
21   colors = new color [3];
22  colors[0] = color(255, 0, 0);
23  colors[1] = color(0,   255, 0);
24  colors[2] = color(0, 0, 255);
25}
26
27void setup() {
28  //printArray(SPI.list());
29   adc = new MCP3008(SPI.list()[0]);
30  font = loadFont("ProcessingSansPro-Semibold-250.vlw");
31   textFont(font, 250);
32}
33
34void draw() { 
35  if (glitch) {
36    blendMode(BLEND);
37     a = random(100);
38    b = random(100, 255);
39    background(255);
40    fill(b,   a, 0);
41  } else {
42    background(255, 0, 0);
43    fill(255);
44  }
45   textAlign(CENTER, CENTER);
46  //text("LIKES: "+count, width/2, height/2);
47   countHit();
48  graphic();
49  timer();
50  println(adc.getAnalog(0));
51}
52void   countHit() {
53  if (adc.getAnalog(0)<0.75 && adc.getAnalog(0)>0.0) {
54    readytoHit=true;
55   }
56
57  if (readytoHit) {
58    if (adc.getAnalog(0)>=0.75) {
59      count++;
60       glitch=true;
61      readytoHit=false;
62    }
63  }
64
65  println("hit:   "+readytoHit);
66  //println("glitch: "+glitch);
67  //println("FSR chan 0:   "+adc.getAnalog(0));
68  delay(200);
69}
70
71void graphic() {
72  //ProcessingSansPro-Semibold-48.vlw
73   pushMatrix();
74  translate(0, height);
75  rotate(radians(-90));
76  textSize(50);
77   text("LIKE ME!?", height/2, 50);
78  textSize(30);
79  text("my likes today:",   height/2, 100);
80  textSize(200);
81  text(count, height/2, width/2-50);
82   textSize(35);
83  text(" X ", height-60, 150);
84  textSize(26);
85  text("--------------------------------------------",   height/2, width-340);
86  text("how?", height/2, width-300);
87  textAlign(LEFT);
88   text("  ^_^ ", 50, width-250);
89  text("  ^D^ ", 50, width-200);
90  text("   T_T ", 50, width-150);
91  text("  v3v ", 50, width-100);
92  text("  *c*   ", 50, width-50);
93  noFill();
94  stroke(255, 255, 255);
95  strokeWeight(3);
96   ellipse(81, width-260, 60, 45);
97  ellipse(81, width-210, 60, 45);
98  ellipse(81,   width-160, 60, 45);
99  ellipse(81, width-110, 60, 45);
100  ellipse(81, width-60,   60, 45);
101  ellipse(height-60, 150, 80, 65);
102  noStroke();
103  textAlign(RIGHT);
104   text(smile, height-50, width-250);
105  text(laugh, height-50, width-200);
106   text(cry, height-50, width-150);
107  text(kiss, height-50, width-100);
108  text(confused,   height-50, width-50);
109  textAlign(CENTER);
110  if (glitch) {
111    blendMode(EXCLUSION);
112     textSize(50);
113    text("i got a like now", (height/2)-5, width/2-50);
114     textSize(30);
115    text("my likes today:", height/2, 100);
116    textSize(200);
117     text(count, height/2, (width/2)-3);
118    textSize(52);
119    text("LIKE   ME!", (height/2), width-250);
120    text("LIKE ME!", (height/2), width-200);
121     text("LIKE ME!", (height/2), width-150);
122    text("LIKE ME!", (height/2),   width-100);
123    text("LIKE ME!", (height/2), width-50);
124  } else {
125    blendMode(BLEND);
126   }
127  popMatrix();
128}
129
130void timer() {
131  currentTime=millis()-startTime;
132
133   if (currentTime>totalTime) {
134    glitch = false;
135    fill(255);
136    startTime   = millis();
137    //println("*******restart*********");
138  }
139  // println("time:   "+ round(currentTime));
140}
141int i=0;
142void mousePressed() {
143  /*text("(^_^)",50,width-250);
144    text("(^D^)",50,width-200);
145   text("(T_T)",50,width-150);
146   text("(V3V)",50,width-100);
147    text("(*c*)",50,width-50);*/
148  if (mouseY<425 && mouseY>363) {
149    if   (mouseX >527 && mouseX<557) {
150      smile++;
151      count++;
152      glitch=true;
153     } else if (mouseX >577 && mouseX<607) {
154      laugh++;
155      count++;
156       glitch=true;
157    } else if (mouseX >627 && mouseX<657) {
158      cry++;
159       count++;
160      glitch=true;
161    } else if (mouseX >677 && mouseX<707)   {
162      kiss++;
163      count++;
164      glitch=true;
165    } else if (mouseX   >726 && mouseX<756) {
166      confused++;
167      count++;
168      glitch=true;
169     }
170  } else if (mouseY < height-50 && mouseY>0) {
171    if (mouseX >125&&mouseX<175)   {
172      count--;
173      println("unlike");
174    }
175  }
176  //i++;
177   //println(i+" x: "+mouseX+" y: "+mouseY);
178}

1 #include <LedControl.h>
2#include <Adafruit_NeoPixel.h>
3
4#define
5  PIXEL_PIN    6    // Digital IO pin connected to the NeoPixels.
6#define PIXEL_COUNT
7  46
8
9int DIN = 12;
10int CS =  11;
11int CLK = 10;
12int count = 0;
13String
14  number = "";
15long a = random(50, 255);
16char Array[2];
17byte one[8] =     {0x18,
18  0x28, 0x8, 0x8, 0x8, 0x8, 0x8, 0x3e};
19byte two[8] =     {0x1c, 0x22, 0x2, 0x2,
20  0x1c, 0x20, 0x20, 0x3e};
21byte three[8] =   {0x1c, 0x22, 0x2, 0x2, 0x1e, 0x2,
22  0x22, 0x1c};
23byte four[8] =    {0xc, 0x14, 0x24, 0x44, 0x7f, 0x4, 0x4, 0x4};
24byte
25  five[8] =    {0x7e, 0x40, 0x40, 0x78, 0xe, 0x2, 0x2, 0x7c};
26byte six[8] =     {0x3c,
27  0x42, 0x40, 0x40, 0x7c, 0x42, 0x42, 0x3c};
28byte seven[8] =   {0x7e, 0x2, 0x2,
29  0x4, 0x8, 0x10, 0x10, 0x10};
30byte eight[8] =   {0x3c, 0x42, 0x42, 0x3c, 0x66,
31  0x42, 0x42, 0x3c};
32byte nine[8] =    {0x3c, 0x42, 0x42, 0x42, 0x3e, 0x2, 0x42,
33  0x3c};
34byte zero[8] =    {0x3c, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x3c};
35byte
36  smile[8] =   {0x3C, 0x42, 0xA5, 0x81, 0xA5, 0x99, 0x42, 0x3C};
37byte sad[8] =
38   {0xff, 0x81, 0xa5, 0x81, 0x99, 0xa5, 0x81, 0xff};
39
40bool smile_sw = false;
41
42LedControl
43  lc = LedControl(DIN, CLK, CS, 2); // Pins: DIN,CLK,CS, amount of display connected
44Adafruit_NeoPixel
45  strip = Adafruit_NeoPixel(PIXEL_COUNT, PIXEL_PIN, NEO_GRB + NEO_KHZ800);
46
47const
48  int unFriend_pin = 4;     // the number of the pushbutton pin
49const int addFriend_pin
50  = 5;  //the number of rings switch
51const int ledPin =  13;      // the number
52  of the LED pin
53int buttonState = 0;
54int ringState = 0;
55int oldState = 0;
56int
57  oldRingState = 0;
58int showType = 0;
59
60void setup() {
61  Serial.begin(9600);
62
63  lc.shutdown(0, false);      //The MAX72XX is in power-saving mode on startup
64
65  lc.setIntensity(0, 1);     // Set the brightness to maximum value. scale is 0-15;
66  15 is the brightest
67  lc.clearDisplay(0);         // and clear the display
68
69
70  lc.shutdown(1, false);      //The MAX72XX is in power-saving mode on startup
71
72  lc.setIntensity(1, 1);     // Set the brightness to maximum value. scale is 0-15;
73  15 is the brightest
74  lc.clearDisplay(1);         // and clear the display
75
76
77  pinMode(ledPin, OUTPUT);
78  // initialize the pushbutton pin as an input:
79
80  pinMode(unFriend_pin, INPUT);
81  strip.begin();
82  strip.show(); // Initialize
83  all pixels to 'off'
84
85}
86
87void loop() {
88
89  buttonState = digitalRead(unFriend_pin);
90
91  ringState = digitalRead(addFriend_pin);
92  Serial.print("unfreinds x ");
93
94  Serial.print(buttonState + " add freinds x ");
95  Serial.println(addFriend_pin);
96
97  // Get current button state.
98  int newState = digitalRead(unFriend_pin);
99
100  int newRingState = digitalRead(addFriend_pin);
101  // Check if state changed
102  from high to low (button press).
103  //  if (newState >= 830 && oldState < 830)
104  { //if analogRead
105  if (newState == HIGH && oldState == LOW) {
106    // Short
107  delay to debounce button.
108    delay(20);
109    // Check if button is still low
110  after debounce.
111    newState = digitalRead(unFriend_pin);
112
113    //    if
114  (newState >=830) {  //if analogRead
115    if (newState == HIGH) {
116      showType
117  = 10;
118      count--;
119      if (count <= 0) {
120        count = 0;
121      }
122
123      printFir_Byte(sad);
124      printSec_Byte(sad);
125      startShow(showType);
126
127      showNum();
128
129      digitalWrite(ledPin, HIGH);
130      delay(250);
131
132    }
133
134  }
135  if (newRingState == HIGH && oldRingState == LOW) {
136    //
137  Short delay to debounce button.
138    delay(20);
139    newRingState = digitalRead(addFriend_pin);
140
141    if (newRingState == HIGH) {
142      showType++;
143      count++;
144      if
145  (showType > 9) {
146        showType = 0;
147      }
148      a = random(50, 255);
149
150      Serial.println(a);
151      printFir_Byte(smile);
152      printSec_Byte(smile);
153
154      startShow(showType);
155      showNum();
156
157      digitalWrite(ledPin,
158  HIGH);
159      delay(250);
160    }
161
162  }
163
164  // Set the last button
165  state to the old state.
166  oldState = newState;
167  oldRingState = newRingState;
168
169  //  lc.clearDisplay(0);
170
171
172}
173
174void startShow(int i) {
175  switch
176  (i) {
177    case 1: theaterChase(strip.Color(a,   0,   0), 50);  // Green
178      break;
179
180    case 2: theaterChase(strip.Color(0,   a,   0), 50); // Blue
181      break;
182
183    case 3: theaterChase(strip.Color(0,   0,   a), 50);  // light blue
184      break;
185
186    case 4: theaterChase(strip.Color(0,  100,   a), 50);  // mint
187      break;
188
189    case 5: theaterChase(strip.Color(0,   a,   100), 50);// warm yellow
190      break;
191
192    case 6: theaterChase(strip.Color(a,   100,   0), 50); // violet
193      break;
194
195    case 7: theaterChase(strip.Color( 100,   a, 100), 50); // christmas green
196
197      break;
198    case 8: theaterChase(strip.Color(0,   50,   a), 50); // dark
199  red
200      break;
201    case 9: theaterChase(strip.Color(50,   a,   0), 50);
202  // super hero blue
203      break;
204    case 0: theaterChase(strip.Color(a,   0,
205   50), 50); // bright red
206      break;
207    case 10: theaterChase(strip.Color(255,
208   0,   0), 50); // super hero blue
209      break;
210  }
211  Serial.println(i);
212
213  strip.show();
214}
215
216void showNum() {
217  char Array[2];
218  if (count
219  <= 99) {
220    dtostrf(count, 2, 0, Array);
221  } else {
222    count = 0;
223
224    dtostrf(count, 2, 0, Array);
225  }
226  Serial.print(Array[0]);
227  Serial.print("
228  , ");
229  Serial.println(Array[1]);
230  if (Array[0] == ' ') {
231    printFir_Byte(zero);
232
233  } else if (Array[0] == '1') {
234    printFir_Byte(one);
235  } else if (Array[0]
236  == '2') {
237    printFir_Byte(two);
238  } else if (Array[0] == '3') {
239    printFir_Byte(three);
240
241  } else if (Array[0] == '4') {
242    printFir_Byte(four);
243  } else if (Array[0]
244  == '5') {
245    printFir_Byte(five);
246  } else if (Array[0] == '6') {
247    printFir_Byte(six);
248
249  } else if (Array[0] == '7') {
250    printFir_Byte(seven);
251  } else if (Array[0]
252  == '8') {
253    printFir_Byte(eight);
254  } else if (Array[0] == '9') {
255    printFir_Byte(nine);
256
257  } else if (Array[0] == '0') {
258    printFir_Byte(zero);
259  }
260
261
262  if
263  (Array[1] == '1') {
264    printSec_Byte(one);
265  } else if (Array[1] == '2')
266  {
267    printSec_Byte(two);
268  } else if (Array[1] == '3') {
269    printSec_Byte(three);
270
271  } else if (Array[1] == '4') {
272    printSec_Byte(four);
273  } else if (Array[1]
274  == '5') {
275    printSec_Byte(five);
276  } else if (Array[1] == '6') {
277    printSec_Byte(six);
278
279  } else if (Array[1] == '7') {
280    printSec_Byte(seven);
281  } else if (Array[1]
282  == '8') {
283    printSec_Byte(eight);
284  } else if (Array[1] == '9') {
285    printSec_Byte(nine);
286
287  } else if (Array[1] == '0') {
288    printSec_Byte(zero);
289  }
290
291}
292
293void
294  printFir_Byte(byte fir_char[])
295{
296  int i = 0;
297  for (i = 0; i < 8; i++)
298
299  {
300    lc.setRow(0, i, fir_char[i]);
301  }
302}
303
304
305void printSec_Byte(byte
306  sec_char [])
307{
308  int i = 0;
309  for (i = 0; i < 8; i++)
310  {
311    lc.setRow(1,
312  i, sec_char[i]);
313  }
314}
315
316//Theatre-style crawling lights.
317void theaterChase(uint32_t
318  c, uint8_t wait) {
319  for (int j = 0; j < 10; j++) { //do 10 cycles of chasing
320
321    for (int q = 0; q < 3; q++) {
322      for (int i = 0; i < strip.numPixels();
323  i = i + 3) {
324        strip.setPixelColor(i + q, c);  //turn every third pixel
325  on
326      }
327      strip.show();
328      delay(wait);
329      for (int i =
330  0; i < strip.numPixels(); i = i + 3) {
331        strip.setPixelColor(i + q, 0);
332      //turn every third pixel off
333
334      }
335    }
336  }
337}
338
339//
340  Input a value 0 to 255 to get a color value.
341// The colours are a transition
342  r - g - b - back to r.
343uint32_t Wheel(byte WheelPos) {
344  WheelPos = 255 -
345  WheelPos;
346  if (WheelPos < 85) {
347    return strip.Color(255 - WheelPos * 3,
348  0, WheelPos * 3);
349  }
350  if (WheelPos < 170) {
351    WheelPos -= 85;
352    return
353  strip.Color(0, WheelPos * 3, 255 - WheelPos * 3);
354  }
355  WheelPos -= 170;
356
357  return strip.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
358}
359

1import processing.io.SPI;
2
3// MCP3008 is a Analog-to-Digital converter  using SPI
4// other than the MCP3001, this has 8 input channels
5// datasheet:  http://ww1.microchip.com/downloads/en/DeviceDoc/21295d.pdf
6
7class MCP3008  extends SPI {
8
9  MCP3008(String dev) {
10    super(dev);
11    settings(500000,  SPI.MSBFIRST, SPI.MODE0);
12  }
13
14  float getAnalog(int channel) {
15    if  (channel < 0 ||  7 < channel) {
16      System.err.println("The channel needs  to be from 0 to 7");
17      throw new IllegalArgumentException("Unexpected channel");
18    }
19    byte[] out = { 0, 0, 0 };
20    // encode the channel number in the  first byte
21    out[0] = (byte)(0x18 | channel);
22    byte[] in = transfer(out);
23    int val = ((in[1] & 0x03) << 8) | (in[2] & 0xff);
24    // val is between 0  and 1023
25    return val/1023.0;
26  }
27}

1#!/usr/bin/python
2# Example using a character LCD connected to a Raspberry  Pi or BeagleBone Black.
3import time
4import Adafruit_CharLCD as LCD
5from  ScrollLCD import*
6#-----#
7import Adafruit_GPIO.SPI as SPI
8import MCP3008
9#-----#
10from  neopixel import *
11import argparse
12import signal
13import sys
14
15# Raspberry  Pi pin configuration:
16# Note this might need to be changed to 21 for older revision  Pi's.
17lcd_rs        = 27 #26
18lcd_en        = 22 #19
19lcd_d4        = 25  #13
20lcd_d5        = 24 #6
21lcd_d6        = 23 #5
22lcd_d7        = 17 #11
23lcd_backlight  = 4
24
25# Define LCD column and row size for 16x2 LCD.
26lcd_columns = 16
27lcd_rows    = 2
28#Hardware SPI configuration:
29SPI_PORT   = 0
30SPI_DEVICE = 0
31mcp  = MCP3008.MCP3008(spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE))
32
33# Initialize the  LCD using the pins above.
34lcd = LCD.Adafruit_CharLCD(lcd_rs, lcd_en, lcd_d4,  lcd_d5, lcd_d6, lcd_d7,
35                           lcd_columns, lcd_rows, lcd_backlight)
36
37def  signal_handler(signal, frame):
38        colorWipe(strip, Color(0,0,0))
39        sys.exit(0)
40
41def  opt_parse():
42        parser = argparse.ArgumentParser()
43        parser.add_argument('-c',  action='store_true', help='clear the display on exit')
44        args = parser.parse_args()
45        if args.c:
46                signal.signal(signal.SIGINT, signal_handler)
47
48def  wheel(pos):
49        """Generate rainbow colors across 0-255 positions."""
50        if pos < 85:
51                return Color(pos * 3, 255 - pos * 3, 0)
52        elif pos < 170:
53                pos -= 85
54                return Color(255  - pos * 3, 0, pos * 3)
55        else:
56                pos -= 170
57                return  Color(0, pos * 3, 255 - pos * 3)
58
59# LED strip configuration:
60LED_COUNT      = 48      # Number of LED pixels.
61LED_PIN        = 18      # GPIO pin connected  to the pixels (18 uses PWM!).
62#LED_PIN        = 10      # GPIO pin connected  to the pixels (10 uses SPI /dev/spidev0.0).
63LED_FREQ_HZ    = 800000  # LED signal  frequency in hertz (usually 800khz)
64LED_DMA        = 10      # DMA channel to  use for generating signal (try 10)
65LED_BRIGHTNESS = 255     # Set to 0 for darkest  and 255 for brightest
66LED_INVERT     = False   # True to invert the signal (when  using NPN transistor level shift)
67LED_CHANNEL    = 0       # set to '1' for GPIOs  13, 19, 41, 45 or 53
68LED_STRIP      = ws.WS2811_STRIP_GRB   # Strip type and  colour ordering
69#LED_STRIP      = ws.WS2812_STRIP
70
71LED_i =0
72light =  True
73aftertouch=False
74count=0
75aftertap=False
76following=0
77
78def  tuang(strip,wait_ms=20,iterations=1):
79        """Draw 1 pixel at a time."""
80        for j in range(1):
81                print(j)
82                for i  in range(strip.numPixels()):
83                        strip.setPixelColor(strip.numPixels()-i,  wheel((int(i * 256 / strip.numPixels())+j) & 255))
84                        strip.show()
85                        time.sleep(0.05)
86                        # strip.show()
87                        # time.sleep(0.05)
88                for i in range(strip.numPixels()):
89                        strip.setPixelColor(strip.numPixels()-i, 0)
90                        strip.show()
91                        time.sleep(wait_ms/1000.0)
92                        LED_i  = i
93                        print(LED_i)
94
95#text="Hi! I'm Tuang.  I do  cool things."
96#breaker=False
97#n = 16
98#rows = [text[i:i+n] for i in range(0,  len(text), n)]
99#n_rows = len(rows)
100#scroll(lcd,text,False,False,1)
101
102print('Reading  MCP3008 values, press Ctrl-C to quit...')
103# Print nice channel column headers.
104print('|  {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4} | {5:>4} | {6:>4} | {7:>4} |'.format(*range(8)))
105print('-'  * 57)
106
107# Main program logic follows:
108if __name__ == '__main__':
109    #Process  arguments
110    opt_parse()
111    # Create NeoPixel object with appropriate configuration.
112    strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA, LED_INVERT,  LED_BRIGHTNESS, LED_CHANNEL, LED_STRIP)
113    #Intialize the library (must be called  once before other functions)
114    strip.begin()
115    while True:
116        #Read  all the ADC channel values in a list.
117        values = [0]*8
118        for i  in range(8):
119                #The read_adc function will get the value of the  specified channel (0-7).
120                values[i] = mcp.read_adc(i)
121                #Pause  for half a second.
122        print('| {0:>4} | {1:>4} | {2:>4} | {3:>4} | {4:>4}  | {5:>4} | {6:>4} | {7:>4} |'.format(*values))
123        time.sleep(0.2)
124        #lcd.clear()
125        if values[1]>800:
126            if aftertouch:
127                    count=count+1
128                    lcd.clear()
129                    lcd.message('following: '+str(following))
130                    lcd.message('\
131followers: '+str(count)+'     ')
132                    #scroll(lcd,text,count,breaker,False,False,0)
133                    aftertouch=False
134        else:
135            aftertouch=True
136            #scroll(lcd,text,count,breaker,False,False,0)
137            lcd.message('following:  '+str(following))
138            lcd.message('\
139followers: '+str(count)+'     ')
140        if values[2]>600:
141            if aftertap:
142                    #print('sholder  tap!')
143                    following=following+1
144                    lcd.clear()
145                    lcd.message('following: '+str(following))
146                    lcd.message('\
147followers:  '+str(count)+'     ')
148                    #scroll(lcd,text,count,breaker,False,False,0)
149                    aftertap=False
150        else:
151            aftertap=True
152            #scroll(lcd,text,count,breaker,False,False,0)
153            lcd.message('following:  '+str(following))
154            lcd.message('\
155followers: '+str(count)+'     ')
156        if values[0]>600:
157            print("Hi5!")
158            light=True
159        else:
160            light=False
161        if light:
162            tuang(strip)
163            light=False
164        else:
165            for i in range(strip.numPixels()):
166                strip.setPixelColor(i,0)
167            strip.show()
168        #for  x in range(n_rows):
169         #       lcd.home()
170          #      lcd.clear()
171           #     nxt = x + 1
172            #    lcd.message(rows[x])
173             #   lcd.message('\
174Follower:'+str(count)+'     ') #space 3 times to avoid any char  on the first row drops
175              #  if nxt == n_rows:
176               #         sleep(2)
177                        #break
178                #else:
179                 #       lcd.message(rows[nxt])
180                  #      sleep(1)
181

1import processing.io.*;
2MCP3008 adc;
3PFont font;
4int count=0;
5boolean  readytoHit=true;
6boolean debugging =false;
7int scale =2;
8color[] colors;
9float  a, b;
10int startTime;
11int totalTime=3000;
12int currentTime;
13boolean glitch=false;
14int  smile=0, laugh=0, cry=0, kiss=0, confused=0;
15void settings() {
16  if (debugging)  {
17    size(800/scale, 480/scale);
18  } else {
19    fullScreen(0);
20  }
21  colors = new color [3];
22  colors[0] = color(255, 0, 0);
23  colors[1] = color(0,  255, 0);
24  colors[2] = color(0, 0, 255);
25}
26
27void setup() {
28  //printArray(SPI.list());
29  adc = new MCP3008(SPI.list()[0]);
30  font = loadFont("ProcessingSansPro-Semibold-250.vlw");
31  textFont(font, 250);
32}
33
34void draw() { 
35  if (glitch) {
36    blendMode(BLEND);
37    a = random(100);
38    b = random(100, 255);
39    background(255);
40    fill(b,  a, 0);
41  } else {
42    background(255, 0, 0);
43    fill(255);
44  }
45  textAlign(CENTER, CENTER);
46  //text("LIKES: "+count, width/2, height/2);
47  countHit();
48  graphic();
49  timer();
50  println(adc.getAnalog(0));
51}
52void  countHit() {
53  if (adc.getAnalog(0)<0.75 && adc.getAnalog(0)>0.0) {
54    readytoHit=true;
55  }
56
57  if (readytoHit) {
58    if (adc.getAnalog(0)>=0.75) {
59      count++;
60      glitch=true;
61      readytoHit=false;
62    }
63  }
64
65  println("hit:  "+readytoHit);
66  //println("glitch: "+glitch);
67  //println("FSR chan 0:  "+adc.getAnalog(0));
68  delay(200);
69}
70
71void graphic() {
72  //ProcessingSansPro-Semibold-48.vlw
73  pushMatrix();
74  translate(0, height);
75  rotate(radians(-90));
76  textSize(50);
77  text("LIKE ME!?", height/2, 50);
78  textSize(30);
79  text("my likes today:",  height/2, 100);
80  textSize(200);
81  text(count, height/2, width/2-50);
82  textSize(35);
83  text(" X ", height-60, 150);
84  textSize(26);
85  text("--------------------------------------------",  height/2, width-340);
86  text("how?", height/2, width-300);
87  textAlign(LEFT);
88  text("  ^_^ ", 50, width-250);
89  text("  ^D^ ", 50, width-200);
90  text("  T_T ", 50, width-150);
91  text("  v3v ", 50, width-100);
92  text("  *c*  ", 50, width-50);
93  noFill();
94  stroke(255, 255, 255);
95  strokeWeight(3);
96  ellipse(81, width-260, 60, 45);
97  ellipse(81, width-210, 60, 45);
98  ellipse(81,  width-160, 60, 45);
99  ellipse(81, width-110, 60, 45);
100  ellipse(81, width-60,  60, 45);
101  ellipse(height-60, 150, 80, 65);
102  noStroke();
103  textAlign(RIGHT);
104  text(smile, height-50, width-250);
105  text(laugh, height-50, width-200);
106  text(cry, height-50, width-150);
107  text(kiss, height-50, width-100);
108  text(confused,  height-50, width-50);
109  textAlign(CENTER);
110  if (glitch) {
111    blendMode(EXCLUSION);
112    textSize(50);
113    text("i got a like now", (height/2)-5, width/2-50);
114    textSize(30);
115    text("my likes today:", height/2, 100);
116    textSize(200);
117    text(count, height/2, (width/2)-3);
118    textSize(52);
119    text("LIKE  ME!", (height/2), width-250);
120    text("LIKE ME!", (height/2), width-200);
121    text("LIKE ME!", (height/2), width-150);
122    text("LIKE ME!", (height/2),  width-100);
123    text("LIKE ME!", (height/2), width-50);
124  } else {
125    blendMode(BLEND);
126  }
127  popMatrix();
128}
129
130void timer() {
131  currentTime=millis()-startTime;
132
133  if (currentTime>totalTime) {
134    glitch = false;
135    fill(255);
136    startTime  = millis();
137    //println("*******restart*********");
138  }
139  // println("time:  "+ round(currentTime));
140}
141int i=0;
142void mousePressed() {
143  /*text("(^_^)",50,width-250);
144   text("(^D^)",50,width-200);
145   text("(T_T)",50,width-150);
146   text("(V3V)",50,width-100);
147   text("(*c*)",50,width-50);*/
148  if (mouseY<425 && mouseY>363) {
149    if  (mouseX >527 && mouseX<557) {
150      smile++;
151      count++;
152      glitch=true;
153    } else if (mouseX >577 && mouseX<607) {
154      laugh++;
155      count++;
156      glitch=true;
157    } else if (mouseX >627 && mouseX<657) {
158      cry++;
159      count++;
160      glitch=true;
161    } else if (mouseX >677 && mouseX<707)  {
162      kiss++;
163      count++;
164      glitch=true;
165    } else if (mouseX  >726 && mouseX<756) {
166      confused++;
167      count++;
168      glitch=true;
169    }
170  } else if (mouseY < height-50 && mouseY>0) {
171    if (mouseX >125&&mouseX<175)  {
172      count--;
173      println("unlike");
174    }
175  }
176  //i++;
177  //println(i+" x: "+mouseX+" y: "+mouseY);
178}