Getting real-time position using MPU9250

Arduino Nano

Dupont cables

Arduino IDE

MPU9250

Mini Breadboard

Main article: <a href="https://www.hibit.dev/posts/73/getting-real-time-position-using-mpu9250?utm_source=arduino&utm_medium=social&utm_campaign=project_hub">Getting real-time position using MPU9250</a>MPU-9250 is one of the most advanced combined accelerometer, gyroscope and compass small size sensors currently available. It replaces the popular MPU-9150 lowering the power consumption, improving gyro noise and compass full scale range performance. It has many advanced features, including low pass filtering, motion detection and even a programmable specialized processor.Internally it includes the MPU-6500, which contains a 3-axis gyroscope plus a 3-axis accelerometer, and the AK8963, the market leading 3-axis digital compass. The MPU-9250 uses 16-bit analog-to-digital converters (ADCs) for digitizing all 9 axes.The MPU-9250 is a high performance accelerometer, gyroscope and magnetometer option for use in applications such as gesture recognition, self-balancing robots, cell phones, fitness monitoring and similar applications where detection of movement direction and magnitude along with rotation is desired. In <a href="https://www.hibit.dev/posts/36/reading-mpu9250-sensors-with-arduino">reading MPU9250 sensors with Arduino </a>article we've introduced the module and how to interact with it. As well as, the use of <a href="https://www.hibit.dev/posts/67/complementary-filter-and-relative-orientation-with-mpu9250">complementary filter to get the relative position.</a> Let's now see the full power of MPU9250 module: the mixed use of gyroscope, accelerometer and magnetometer to get real-time accurate position.<h3 >Gyroscope</h3>A gyroscope is a device used for measuring or maintaining orientation and angular velocity. Measured in degrees (or radian) per second, angular velocity is the change in the rotational angle of the object per unit of time.<h3 >Acceletometer</h3>Accelerometer sensors are integrated circuits (ICs) that measure acceleration, which is the change in speed per unit time. Measuring acceleration makes it possible to obtain information such as object inclination and vibration.Commonly, g is used as a unit for acceleration, relative to standard gravity (1g = 9.80665m/s2).<h3 >Magnetometer</h3>Magnetometer provides information about the magnetic field detected by the device sensor, and in theory, can expose location of a user. The magnetometer sensor measures the magnetic field for all three physical axes (x, y, z) in μT (micro Tesla).<h3 >Wiring schema</h3>Connect the power supply pins and SDA, SCL pins according to the connection diagram shown below.<figure><img src=https://projects.arduinocontent.cc/48c621ec-4972-482c-a04e-26493157115e.png /><figcaption>Arduino Nano wiring with MPU9250</figcaption></figure>Note: the module operates with 3.3 volts, although some versions have a regulator that allows to connect it to 5V. Make sure to check your module specification before using it.<h3 >Relative and absolute orientation</h3>Relative orientation is the recovery of the position and orientation of one object relative to another. Depending on the direction there are three types of angular rate measurements:<ul ><li >Yaw: the horizontal rotation on a flat surface when seen the object from above.</li></ul><ul ><li >Pitch: vertical rotation as seen the object from front.</li></ul><ul ><li >Roll: horizontal rotation when seen the object from front.</li></ul>A graphical representation for each axis using a plane:<figure><img src=https://projects.arduinocontent.cc/e1fb92d0-797c-401a-88d5-505efa7650eb.png /><figcaption> </figcaption></figure>The absolute orientation is one of the common use-cases of a magnetometer and represents an orientation stationary (fixed to the magnetic field vector and gravity vector) to the Earth plane.<h3 >Noise and errors</h3>In the ideal word, sensors data with applied formulas would provide us precise and exact angles. The reality is different as some factors affect the sensors output.Typically, when you move around with an accelerometer it experiences movement accelerations. Additional acceleration values may affect the orientation accuracy. Another accelerometer related problem is the noise: unwanted disturbance in an electrical signal. The accelerometer is able to measure any angle, however its readings are noisy and have a certain margin of error even with a low pass filter.On the other hand, gyroscopes are subject to bias instabilities, in which the initial zero reading of the gyroscope will cause drift over time due to integration of inherent imperfections and noise within the device.Magnetometers are absolutely essential for correcting gyro drift in applications that require absolute orientation through sensor fusion. Magnetometer problem is their non-ideal response surfaces and location dependency.<h3 >Getting real time position</h3>There are different algorithms to solve errors and noise problem. We are going to make use of quaternions. Quaternions are used in pure mathematics but also have practical uses in applied mathematics, particularly for calculations involving three-dimensional rotations. They can be used alongside other methods of rotation, such as Euler angles and rotation matrices, or as an alternative to them, depending on the application. The use of MPU9250 library rid us of understanding all the complexity of quaternions and the implementation is already done.<h3 >Magnetic declination</h3>Magnetic declination should be set depending on where you are to get accurate data. You can find magnetic declination in your city <a href="http://www.magnetic-declination.com/">here.</a><figure><img src=https://projects.arduinocontent.cc/1976767e-c0b8-4ee8-aa12-867ea74f2a4b.png /><figcaption> </figcaption></figure>Note that the declination here is currently 1˚ 38'. The provided format needs to be converted to decimal degrees for the code. There are 60 minutes per degree, 38 of them is 38/60 of a degree, i.e., 0.63. The declination in decimal format for 1˚ 38' is 1.63. Update the code MAGNETIC_DECLINATION constant with the declination for your location.<h3 >Magnetic calibration</h3>There is simple way to calibrate automatically and correct some of the errors of magnetometer data. Move slowly the sensor in a figure eight pattern and keep track of the minimum and maximum field measured in each of the six principal directions. The average can be subtracted from the subsequent data which amounts to re-centering the response surface on the origin. The library has calibration function that will automatically do it for us, we just need to move the sensor in a figure eight when calibration starts.<h3 >Install Arduino library for MPU9250</h3>To interact with MPU9250 module we can use raw implementation or make use of existing libraries. The library provides an interface to communicate with the module saving us a lot of time. Another advantage is robust code base tested and improved by the community during years. We recommend to make use of the library and avoid implementing everything from scratch. It can be downloaded from our <a href="https://github.com/hibit-dev/mpu9250/raw/master/lib/MPU9250.zip">official repository.</a>To import a library, open the Arduino IDE, go to Sketch > Include Library > Add.ZIP Library and select the library file downloaded from our GitHub repository.<figure><img src=https://projects.arduinocontent.cc/003f534c-ea7a-44a9-b93f-010c90c7b5e7.png /><figcaption>Including external library to Arduino IDE</figcaption></figure>Then you can simply use include statement:<pre ><code >#include "MPU9250.h" </code></pre>It will include the library with predefined functions to interact with MPU9250.<h3 >Arduino code</h3>The code below is straightforward as we used a library that provides clear interface to interact with MPU9250 module. In setup function we configure and calibrate the module and print output every INTERVAL_MS_PRINT milliseconds in the loop.<pre ><code >#include "MPU9250.h" #define MPU9250_IMU_ADDRESS 0x68 #define MAGNETIC_DECLINATION 1.63 // To be defined by user #define INTERVAL_MS_PRINT 1000 MPU9250 mpu; unsigned long lastPrintMillis = 0; void setup() { Serial.begin(115200); Wire.begin(); Serial.println("Starting..."); MPU9250Setting setting; // Sample rate must be at least 2x DLPF rate setting.accel_fs_sel = ACCEL_FS_SEL::A16G; setting.gyro_fs_sel = GYRO_FS_SEL::G1000DPS; setting.mag_output_bits = MAG_OUTPUT_BITS::M16BITS; setting.fifo_sample_rate = FIFO_SAMPLE_RATE::SMPL_250HZ; setting.gyro_fchoice = 0x03; setting.gyro_dlpf_cfg = GYRO_DLPF_CFG::DLPF_20HZ; setting.accel_fchoice = 0x01; setting.accel_dlpf_cfg = ACCEL_DLPF_CFG::DLPF_45HZ; mpu.setup(MPU9250_IMU_ADDRESS, setting); mpu.setMagneticDeclination(MAGNETIC_DECLINATION); mpu.selectFilter(QuatFilterSel::MADGWICK); mpu.setFilterIterations(15); Serial.println("Calibration will start in 5sec."); Serial.println("Please leave the device still on the flat plane."); delay(5000); Serial.println("Calibrating..."); mpu.calibrateAccelGyro(); Serial.println("Magnetometer calibration will start in 5sec."); Serial.println("Please Wave device in a figure eight until done."); delay(5000); Serial.println("Calibrating..."); mpu.calibrateMag(); Serial.println("Ready!"); } void loop() { unsigned long currentMillis = millis(); if (mpu.update() && currentMillis - lastPrintMillis > INTERVAL_MS_PRINT) { Serial.print("TEMP:\\t"); Serial.print(mpu.getTemperature(), 2); Serial.print("\\xC2\\xB0"); //Print degree symbol Serial.print("C"); Serial.println(); Serial.print("Pitch:\\t"); Serial.print(mpu.getPitch()); Serial.print("\\xC2\\xB0"); //Print degree symbol Serial.println(); Serial.print("Roll:\\t"); Serial.print(mpu.getRoll()); Serial.print("\\xC2\\xB0"); //Print degree symbol Serial.println(); Serial.print("Yaw:\\t"); Serial.print(mpu.getYaw()); Serial.print("\\xC2\\xB0"); //Print degree symbol Serial.println(); Serial.println(); lastPrintMillis = currentMillis; } } </code></pre><h3 >Testing</h3>The serial monitor will print last available sensors data every INTERVAL_MS_PRINT milliseconds (in the example above, once per second) and it should be similar to:<figure><img src=https://projects.arduinocontent.cc/fa360b13-4595-4022-9bb3-bbd0cded98cf.png /><figcaption>Testing output</figcaption></figure>Usually the orientation is drawn on the physical module so you can easily detect pitch and roll.

Getting real-time position using MPU9250

Getting relative and absolute orientation in real-time