Bright Ball IoT

DHT22 Temperature Sensor

DC DC Converter Adjustable Step Down

Standard LCD - 16x2 White on Blue

Diffuser for lamp outer white opal sphere

Blynk

ESP8266 ESP-01

Arduino Nano R3

Pushbutton switch 12mm

1N4007 – High Voltage, High Current Rated Diode

Resistor 475 ohm

Gewiss box

Arduino Web Editor

Linear Regulator (Low Dropout)

Diverter

NeoPixel WS2812B

Jumper wires (generic)

Resistor 1k ohm

Real Time Clock (RTC)

Resistor 221 ohm

<p >This project is based on control via the app Blynk, a matrix of Neopixels. Since a simple lamp was not enough, I added a watch, and a temperature and humidity sensor.</p><h3 >LED Matrix</h3><p >I built a small array of Neopixels as in the diagram below. It is controlled by Arduino with the library &#34;Adafruit_NeoPixel.h&#34;. It is very bright, and is advisable not to look when the LEDs are turned on.</p><div id="gallery"><img id="gallery" src=https://projects.arduinocontent.cc/d91548c0-dc53-4cc9-a2f8-b0b9f3741f3c.jpg /><figcaption>NeoPixel Matrix</figcaption><img id="gallery" src=https://projects.arduinocontent.cc/20b9e9a9-2181-45d3-9b4f-e526e11f8cc6.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/fe6275c2-6923-48ba-a114-05d395fd06b7.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/21cffece-df6c-45d1-bef2-9392ecdf5705.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/334e81de-cea6-48be-85b7-48b8834963e7.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/0c9759e2-3402-40ed-b6dd-23620086cca4.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/7afa6fbe-cfe8-42d7-9f53-13d4fba78b74.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/a8743655-9d5e-4e7d-a5c7-cf7817daad1a.jpg /><figcaption> </figcaption></div><p ></p><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/bRolG4LIp3Q" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><h3 >Sensor DHT</h3><p >I used the DHT 22 sensor to monitor the environmental conditions. The LED color variation, represents the temperature, in 12 color variations from blue (cold) to red (hot).        </p><h3 >Clock</h3><p >The clock is controlled by the RTC. I used a DS1307, but it can also fit the DS3231. For details, see &#34;Clock Set Date Time&#34;. Contrary to that project, I removed the pull-down resistors to the buttons, P1, P2 and P3, which are used to adjust the time, and made a small change in the code.    </p><h3 >IOT</h3><p >Arduino is connected to the internet via the ESP8266, which in turn, is connected to the App Blynk.</p><div id="gallery"><img id="gallery" src=https://projects.arduinocontent.cc/269f6511-45d8-4c40-9175-1e696d2599bb.png /><figcaption>Blynk</figcaption><img id="gallery" src=https://projects.arduinocontent.cc/4c9aab7c-81cf-41e9-a0af-37fc1ae9726e.png /><figcaption> </figcaption></div><h3 >Colors</h3><p >Through the phone you can change the color of the lamp depending on the mood. The colors are set as follows:</p><ul ><li >V1 = Red</li></ul><ul ><li >V2 = Green</li></ul><ul ><li >V3 = Blu</li></ul><ul ><li >V5 = Yellow</li></ul><ul ><li >V6 = Purple</li></ul><ul ><li >V7 = Cyan</li></ul><ul ><li >V8 = White</li></ul><ul ><li >V4 = Temperature</li></ul><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/hbyAz0EqzyE" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><h3 >Electric scheme  </h3><figure><img src=https://projects.arduinocontent.cc/2995f66b-9bf7-499a-8176-f4d8fc296d12.jpg /><figcaption> </figcaption></figure><p >As you can see from the wiring diagram, the heart of the circuit is &#34;Arduino&#34;. In my case I used &#34;Arduino Nano&#34;.</p><ul ><li >Pin A4 and A5 are connected to the respective SDA and SCL of the I2C 16x2 display, and the RTC.</li></ul><ul ><li >The temperature and humidity sensor is connected to Pin 4, through a resistor Pull-Up.</li></ul><ul ><li >The Diverter, connected to pin 12 of Arduino, switches from the IOT mode to a nice play of light, referred to as &#34;rainbow&#34;.</li></ul><h3 >Power</h3><p >To power the ESP8266 I used a LM1117 regulator, while for lowering the voltage at RTX, I used a resistive divider (R1-R2). The group D1, D2, D3 has a protective function:</p><ul ><li >D1 protects against reverse polarity.</li></ul><ul ><li >D2, in case we change the Arduino code, prevents the feeding of Neopixel matrix.</li></ul><ul ><li >D3 lowers 5.6 Volts to 5 Volts.</li></ul><h3 >Arduino Code</h3><p >Libraries:</p><ul ><li >Wire.h – Arduino IDE</li></ul><ul ><li ><a href="https://github.com/adafruit/RTClib">RTClib.h</a><span > </span></li></ul><ul ><li ><a href="https://github.com/fdebrabander/Arduino-LiquidCrystal-I2C-library">LiquidCrystal_I2C.h</a><span > </span></li></ul><ul ><li ><a href="https://github.com/adafruit/DHT-sensor-library">DHT.h </a></li></ul><ul ><li ><a href="https://github.com/adafruit/Adafruit_NeoPixel">Adafruit_NeoPixel.h</a><span > </span></li></ul><ul ><li ><a href="https://github.com/esp8266/Arduino">ESP8266_Lib.h</a><span > </span></li></ul><ul ><li ><a href="https://github.com/blynkkk/blynk-library/releases/tag/v0.4.6">BlynkSimpleShieldEsp8266.h</a><span > </span></li></ul><p >Parameters to be set in the code:</p><ul ><li ><code >char auth[] = &#34;YourAuthToken&#34;; </code><span >enter the Token code of app Blynk.</span></li></ul><ul ><li ><code >Blynk.begin(auth, wifi, &#34;ssid&#34;,&#34;password&#34;);</code><span > enter the SSID and password for your router Wi Fi.</span></li></ul><h3 >Utilization</h3><p >Since my cat does not like the Christmas tree, during the holidays I used this lamp in &#34;rainbow mode&#34;.</p><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/lPrfaYIJWB8" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><p ></p>

Fritzing Scheme

Eletric Scheme

Fritzing Scheme jpeg

Bright Ball IOT

Bright Ball IoT

Luminous ball, with clock and thermometer, controlled by Blynk.