Wemos D1 Multishield Arduino

LDR, 5 Mohm

Arduino Nano

Relay (generic)

Wemos D1 Mini

Arduino IDE

Buzzer

LED (generic)

<p >In this project you’ll discover how to design and create a Multisensor Shield for the ESP8266 Wemos D1 Mini board. The shield has temperature sensor (DS18B20), a PIR motion sensor, an LDR, and a terminal to connect a relay module. We’ll start by preparing all the hardware and then program it.</p><h3 >Program and Test the ESP8266 WeMos D1 Mini Multisensor Shield – Part 2</h3><p >In this second video, we’ll program the Wemos D1 Mini Multisensor Shield with a code that runs a web server that allows you to monitor and control the multisensor shield based on several configurable settings.</p><h3 >Design and Build the ESP8266 WeMos D1 Mini Multisensor Shield – Part 1</h3><p >In this first video we’ll decide the hardware that we’re going to use. We’ll also take a look at this project’s main features and how to design and assemble your own WeMos D1 Mini Multisensor shield.</p><ul ><li >Automatic motion mode, meaning that when it detects motion the relay stays on for a determined number of seconds.</li></ul><ul ><li >Or you can use the luminosity mode, so the relay turns on when the light goes below a certain threshold value.</li></ul><ul ><li >Finally, there’s an option to control the relay based in the current luminosity value and if motion is detected. </li></ul>