Smart fire protection system for buildings

My project is to the alarm the people that there is a fire in the building and a lighted gate that tells the people to exit from that gate

Jan 2, 2021

•

4144 views

•

5 respects

safety

monitoring

Components and supplies

DC Motor, 12 V

Arduino UNO

LED Strip, NeoPixel Digital RGB

Buzzer, Piezo

Gas Detection Sensor, Hydrogen

RGB Diffused Common Cathode

Through Hole Resistor, 10 kohm

Alphanumeric LCD, 16 x 2

Resistor 220 ohm

Breadboard (generic)

Jumper wires (generic)

Apps and platforms

Arduino IDE

tinkercad

Project description

Code

SMART_FIRE_PROTECTION_SYSTEM.ino

c_cpp

This is the code of Smart Fire Protection System

1#include <Adafruit_NeoPixel.h>
2#include <LiquidCrystal.h>
3LiquidCrystal   lcd(8, 9, 10, 11, 12, 13);
4
5//Constants 
6
7const int dinPin = 3;
8
9const   int numOfLeds = 16;
10
11Adafruit_NeoPixel pixels = Adafruit_NeoPixel(numOfLeds,   dinPin, NEO_GRB + NEO_KHZ800);
12int Gas_Sensor_Value = 0;
13int Gas_sensor =   A0;
14int Piezo    = 7;
15int RGB_red  = 6;
16int RGB_green = 5;
17int exhaust_motor   = 4;
18int sprinkler_motor = 2;
19
20void setup() 
21{
22  pixels.begin();
23   pixels.setBrightness(80);
24  lcd.begin(16, 2); // set up the LCD's number of   columns and rows:
25  pinMode(Gas_sensor, INPUT);
26  pinMode(Piezo, OUTPUT);
27   pinMode( RGB_red, OUTPUT);
28  pinMode( RGB_green, OUTPUT);
29  pinMode( exhaust_motor,OUTPUT);
30   pinMode(sprinkler_motor,OUTPUT);
31}
32void loop() 
33{
34   lcd.clear();
35    Gas_Sensor_Value = analogRead(A0);
36
37   if( Gas_Sensor_Value >= 700)
38    {
39  for(int i=0;i<numOfLeds;i++){
40  pixels.setPixelColor(i, pixels.Color(0,255,0));
41   pixels.show();
42  }
43    digitalWrite(sprinkler_motor, HIGH);
44    digitalWrite(Piezo,   HIGH);
45    digitalWrite(exhaust_motor, HIGH);
46    digitalWrite(RGB_red, HIGH);
47     digitalWrite(RGB_green, LOW);
48    lcd.print("Burj Khalifa is"); // Print   a message to the LCD.
49    lcd.setCursor(0,1); 
50   lcd.print("on fire!");
51      delay(1000);
52   }
53  else
54  {
55   digitalWrite( exhaust_motor, LOW);
56    digitalWrite(sprinkler_motor, LOW);
57   digitalWrite(Piezo,    LOW);
58   digitalWrite(RGB_red,   LOW);
59   digitalWrite(RGB_green, HIGH);
60   lcd.print("Burj Khalifa");   // Print a message to the LCD.
61   lcd.setCursor(0,1); 
62   lcd.print("is Safe");   
63    delay(1000);
64  }
65  }
66

#include <Adafruit_NeoPixel.h>
#include <LiquidCrystal.h>
LiquidCrystal   lcd(8, 9, 10, 11, 12, 13);

//Constants 

const int dinPin = 3;

const   int numOfLeds = 16;

Adafruit_NeoPixel pixels = Adafruit_NeoPixel(numOfLeds,   dinPin, NEO_GRB + NEO_KHZ800);
int Gas_Sensor_Value = 0;
int Gas_sensor =   A0;
int Piezo    = 7;
int RGB_red  = 6;
int RGB_green = 5;
int exhaust_motor   = 4;
int sprinkler_motor = 2;

void setup() 
{
  pixels.begin();
   pixels.setBrightness(80);
  lcd.begin(16, 2); // set up the LCD's number of   columns and rows:
  pinMode(Gas_sensor, INPUT);
  pinMode(Piezo, OUTPUT);
   pinMode( RGB_red, OUTPUT);
  pinMode( RGB_green, OUTPUT);
  pinMode( exhaust_motor,OUTPUT);
   pinMode(sprinkler_motor,OUTPUT);
}
void loop() 
{
   lcd.clear();
    Gas_Sensor_Value = analogRead(A0);

   if( Gas_Sensor_Value >= 700)
    {
  for(int i=0;i<numOfLeds;i++){
  pixels.setPixelColor(i, pixels.Color(0,255,0));
   pixels.show();
  }
    digitalWrite(sprinkler_motor, HIGH);
    digitalWrite(Piezo,   HIGH);
    digitalWrite(exhaust_motor, HIGH);
    digitalWrite(RGB_red, HIGH);
     digitalWrite(RGB_green, LOW);
    lcd.print("Burj Khalifa is"); // Print   a message to the LCD.
    lcd.setCursor(0,1); 
   lcd.print("on fire!");
      delay(1000);
   }
  else
  {
   digitalWrite( exhaust_motor, LOW);
    digitalWrite(sprinkler_motor, LOW);
   digitalWrite(Piezo,    LOW);
   digitalWrite(RGB_red,   LOW);
   digitalWrite(RGB_green, HIGH);
   lcd.print("Burj Khalifa");   // Print a message to the LCD.
   lcd.setCursor(0,1); 
   lcd.print("is Safe");   
    delay(1000);
  }
  }

SMART_FIRE_PROTECTION_SYSTEM.ino

c_cpp

This is the code of Smart Fire Protection System

1#include <Adafruit_NeoPixel.h>
2#include <LiquidCrystal.h>
3LiquidCrystal  lcd(8, 9, 10, 11, 12, 13);
4
5//Constants 
6
7const int dinPin = 3;
8
9const  int numOfLeds = 16;
10
11Adafruit_NeoPixel pixels = Adafruit_NeoPixel(numOfLeds,  dinPin, NEO_GRB + NEO_KHZ800);
12int Gas_Sensor_Value = 0;
13int Gas_sensor =  A0;
14int Piezo    = 7;
15int RGB_red  = 6;
16int RGB_green = 5;
17int exhaust_motor  = 4;
18int sprinkler_motor = 2;
19
20void setup() 
21{
22  pixels.begin();
23  pixels.setBrightness(80);
24  lcd.begin(16, 2); // set up the LCD's number of  columns and rows:
25  pinMode(Gas_sensor, INPUT);
26  pinMode(Piezo, OUTPUT);
27  pinMode( RGB_red, OUTPUT);
28  pinMode( RGB_green, OUTPUT);
29  pinMode( exhaust_motor,OUTPUT);
30  pinMode(sprinkler_motor,OUTPUT);
31}
32void loop() 
33{
34   lcd.clear();
35   Gas_Sensor_Value = analogRead(A0);
36
37   if( Gas_Sensor_Value >= 700)
38   {
39  for(int i=0;i<numOfLeds;i++){
40  pixels.setPixelColor(i, pixels.Color(0,255,0));
41  pixels.show();
42  }
43    digitalWrite(sprinkler_motor, HIGH);
44    digitalWrite(Piezo,  HIGH);
45    digitalWrite(exhaust_motor, HIGH);
46    digitalWrite(RGB_red, HIGH);
47    digitalWrite(RGB_green, LOW);
48    lcd.print("Burj Khalifa is"); // Print  a message to the LCD.
49    lcd.setCursor(0,1); 
50   lcd.print("on fire!");
51     delay(1000);
52   }
53  else
54  {
55   digitalWrite( exhaust_motor, LOW);
56   digitalWrite(sprinkler_motor, LOW);
57   digitalWrite(Piezo,    LOW);
58   digitalWrite(RGB_red,  LOW);
59   digitalWrite(RGB_green, HIGH);
60   lcd.print("Burj Khalifa");  // Print a message to the LCD.
61   lcd.setCursor(0,1); 
62   lcd.print("is Safe");  
63    delay(1000);
64  }
65  }
66

#include <Adafruit_NeoPixel.h>
#include <LiquidCrystal.h>
LiquidCrystal  lcd(8, 9, 10, 11, 12, 13);

//Constants 

const int dinPin = 3;

const  int numOfLeds = 16;

Adafruit_NeoPixel pixels = Adafruit_NeoPixel(numOfLeds,  dinPin, NEO_GRB + NEO_KHZ800);
int Gas_Sensor_Value = 0;
int Gas_sensor =  A0;
int Piezo    = 7;
int RGB_red  = 6;
int RGB_green = 5;
int exhaust_motor  = 4;
int sprinkler_motor = 2;

void setup() 
{
  pixels.begin();
  pixels.setBrightness(80);
  lcd.begin(16, 2); // set up the LCD's number of  columns and rows:
  pinMode(Gas_sensor, INPUT);
  pinMode(Piezo, OUTPUT);
  pinMode( RGB_red, OUTPUT);
  pinMode( RGB_green, OUTPUT);
  pinMode( exhaust_motor,OUTPUT);
  pinMode(sprinkler_motor,OUTPUT);
}
void loop() 
{
   lcd.clear();
   Gas_Sensor_Value = analogRead(A0);

   if( Gas_Sensor_Value >= 700)
   {
  for(int i=0;i<numOfLeds;i++){
  pixels.setPixelColor(i, pixels.Color(0,255,0));
  pixels.show();
  }
    digitalWrite(sprinkler_motor, HIGH);
    digitalWrite(Piezo,  HIGH);
    digitalWrite(exhaust_motor, HIGH);
    digitalWrite(RGB_red, HIGH);
    digitalWrite(RGB_green, LOW);
    lcd.print("Burj Khalifa is"); // Print  a message to the LCD.
    lcd.setCursor(0,1); 
   lcd.print("on fire!");
     delay(1000);
   }
  else
  {
   digitalWrite( exhaust_motor, LOW);
   digitalWrite(sprinkler_motor, LOW);
   digitalWrite(Piezo,    LOW);
   digitalWrite(RGB_red,  LOW);
   digitalWrite(RGB_green, HIGH);
   lcd.print("Burj Khalifa");  // Print a message to the LCD.
   lcd.setCursor(0,1); 
   lcd.print("is Safe");  
    delay(1000);
  }
  }

Downloadable files

This is the image of working project

Smart Fire Protection System For Skyscrapers

this is a smart fire protection system it helps us in telling where is the fire . This project works like when the fire is on any floor the gas sensor will alert us the buzzer will start to buzz and the bulb will start to glow and the sprinkler motor will be extinguishing the fire and the exhaust motor will be taking out the smoke from the building and also a neopixel LED will be there on the door because there is zero visibility in the smoke so the greenlight will show us the way out this is how it works

Smart Fire Protection System For Skyscrapers

Comments

Only logged in users can leave comments

2 Team members on this project

Intro

Components and supplies

Apps and platforms

Project description

Code

Downloadable files