Easy Temperature and Humidity Monitoring on your PC with LOGGBOK and the SHT31

1/* IMPORTANT: Install the library "Adafruit SHT31 Library" with the Library Manager first */
2
3#include "Adafruit_SHT31.h". // <-- Adafruit SHT31 Library
4#include "BlaeckSerial.h"
5
6float temperature;
7float humidity;
8
9Adafruit_SHT31 sht31 = Adafruit_SHT31();
10
11// Instantiate a new BlaeckSerial object
12BlaeckSerial BlaeckSerial;
13
14void setup()
15{
16  Serial.begin(9600);
17
18  sht31.begin(0x44);
19  // sht31.heater(true);
20
21  // Setup BlaeckSerial
22  BlaeckSerial.begin(
23      &Serial, // Serial reference
24      2        // Maximal signal count used;
25  );
26
27  BlaeckSerial.DeviceName = "Temp Humidity Sensor";
28  BlaeckSerial.DeviceHWVersion = "Arduino Mega 2560 Rev3";
29  BlaeckSerial.DeviceFWVersion = "1.0";
30
31  BlaeckSerial.addSignal("Temperature [°C]", &temperature);
32  BlaeckSerial.addSignal("Humidity [%]", &humidity);
33}
34
35void loop()
36{
37  temperature = sht31.readTemperature();
38  humidity = sht31.readHumidity();
39
40  BlaeckSerial.tick();
41}