Diy 10 second arduino Gamepad(v1.0)!!!!!!!!!

Breadboard, 170 Pin

Breadboard, 400 Pin

Pushbutton switch 12mm

Alphanumeric LCD, 16 x 2

Arduino Mega 2560

Jumper wires (generic)

When I was playing my game, jumper, I wanted to also add more options but I could not because my original controller was two buttons, one for jumping and one for ducking (which is shown below), but I wanted to add an x, y, a, b, and select.<figure><img src=https://projects.arduinocontent.cc/81cf334d-dcfa-40bc-afe9-2e3a7c9f1e7b.png /><figcaption>my old design</figcaption></figure>so I added the x, a, and b, and I changed jump and duck, to y and select.<figure><img src=https://projects.arduinocontent.cc/eb2be650-79fe-4626-b278-b6e184166544.png /><figcaption>new design</figcaption></figure>

jumper

the controller and the whole circuit

screenshot_2020-07-28_at_5_32_13_pm_vEZ8qgFgaC.png

Diy 10 second arduino Gamepad(v1.0)!!!!!!!!!

Build an Arduino gamepad in 10 seconds