COVID-19 Detection Eyeware

It is an eye ware which can help in detection of corona virus patients by notifying the user if anyone is suspected to have COVID-19.

Jun 10, 2020

•

2350 views

•

0 respects

wearables

iot

health

Devices & Components

Arduino Nano

HC-05 Bluetooth Module

Buzzer, Piezo

Male/Female Jumper Wires

Female/Female Jumper Wires

Hardware & Tools

Tape, Electrical

Soldering iron (generic)

Solder Wire, Lead Free

Software & Tools

Arduino Web Editor

MIT App Inventor 2

Project description

Code

Code for COVID-19 Detection Eye Ware

c_cpp

This is the code for the device.

1#include <OneWire.h>
2
3#include <OneWire.h>
4#include <DallasTemperature.h>
5int   buzzer = 8;
6
7
8
9int temp_sensor = 2;
10
11float temperature = 0;
12int   lowerLimit = 15;
13int higherLimit = 38.5;
14OneWire oneWirePin(temp_sensor);
15DallasTemperature   sensors(&oneWirePin);
16void setup(void){
17  Serial.begin(9600);
18  
19  pinMode(buzzer,OUTPUT);
20
21   sensors.begin();
22}
23void loop(){
24  int c = Serial.parseInt();
25  if   (c == "temperature")
26  Serial.println(temperature);
27  Serial.print("Requesting   Temperatures from sensors: ");
28  sensors.requestTemperatures(); 
29  Serial.println("DONE");
30   
31  temperature = sensors.getTempCByIndex(0);
32  digitalWrite(buzzer, LOW);
33   Serial.print("Temperature is ");
34  Serial.print(temperature);
35
36if(temperature   <= lowerLimit){ 
37    Serial.println(", You are safe."); 
38    digitalWrite(buzzer,   LOW); } 
39
40 
41else if(temperature >= higherLimit){
42    Serial.println(",   COVID-19 detected");
43    digitalWrite(buzzer, HIGH);
44}
45delay(250);
46}
47

#include <OneWire.h>

#include <OneWire.h>
#include <DallasTemperature.h>
int   buzzer = 8;



int temp_sensor = 2;

float temperature = 0;
int   lowerLimit = 15;
int higherLimit = 38.5;
OneWire oneWirePin(temp_sensor);
DallasTemperature   sensors(&oneWirePin);
void setup(void){
  Serial.begin(9600);
  
  pinMode(buzzer,OUTPUT);

   sensors.begin();
}
void loop(){
  int c = Serial.parseInt();
  if   (c == "temperature")
  Serial.println(temperature);
  Serial.print("Requesting   Temperatures from sensors: ");
  sensors.requestTemperatures(); 
  Serial.println("DONE");
   
  temperature = sensors.getTempCByIndex(0);
  digitalWrite(buzzer, LOW);
   Serial.print("Temperature is ");
  Serial.print(temperature);

if(temperature   <= lowerLimit){ 
    Serial.println(", You are safe."); 
    digitalWrite(buzzer,   LOW); } 

 
else if(temperature >= higherLimit){
    Serial.println(",   COVID-19 detected");
    digitalWrite(buzzer, HIGH);
}
delay(250);
}

Code for COVID-19 Detection Eye Ware

c_cpp

This is the code for the device.

1#include <OneWire.h>
2
3#include <OneWire.h>
4#include <DallasTemperature.h>
5int  buzzer = 8;
6
7
8
9int temp_sensor = 2;
10
11float temperature = 0;
12int  lowerLimit = 15;
13int higherLimit = 38.5;
14OneWire oneWirePin(temp_sensor);
15DallasTemperature  sensors(&oneWirePin);
16void setup(void){
17  Serial.begin(9600);
18  
19  pinMode(buzzer,OUTPUT);
20
21  sensors.begin();
22}
23void loop(){
24  int c = Serial.parseInt();
25  if  (c == "temperature")
26  Serial.println(temperature);
27  Serial.print("Requesting  Temperatures from sensors: ");
28  sensors.requestTemperatures(); 
29  Serial.println("DONE");
30  
31  temperature = sensors.getTempCByIndex(0);
32  digitalWrite(buzzer, LOW);
33  Serial.print("Temperature is ");
34  Serial.print(temperature);
35
36if(temperature  <= lowerLimit){ 
37    Serial.println(", You are safe."); 
38    digitalWrite(buzzer,  LOW); } 
39
40 
41else if(temperature >= higherLimit){
42    Serial.println(",  COVID-19 detected");
43    digitalWrite(buzzer, HIGH);
44}
45delay(250);
46}
47

#include <OneWire.h>

#include <OneWire.h>
#include <DallasTemperature.h>
int  buzzer = 8;



int temp_sensor = 2;

float temperature = 0;
int  lowerLimit = 15;
int higherLimit = 38.5;
OneWire oneWirePin(temp_sensor);
DallasTemperature  sensors(&oneWirePin);
void setup(void){
  Serial.begin(9600);
  
  pinMode(buzzer,OUTPUT);

  sensors.begin();
}
void loop(){
  int c = Serial.parseInt();
  if  (c == "temperature")
  Serial.println(temperature);
  Serial.print("Requesting  Temperatures from sensors: ");
  sensors.requestTemperatures(); 
  Serial.println("DONE");
  
  temperature = sensors.getTempCByIndex(0);
  digitalWrite(buzzer, LOW);
  Serial.print("Temperature is ");
  Serial.print(temperature);

if(temperature  <= lowerLimit){ 
    Serial.println(", You are safe."); 
    digitalWrite(buzzer,  LOW); } 

 
else if(temperature >= higherLimit){
    Serial.println(",  COVID-19 detected");
    digitalWrite(buzzer, HIGH);
}
delay(250);
}

Downloadable files

Schematics

This is how the components are wired.

Schematics

Documentation

The App

This is the app which will be connected with the device.

The App

3D model

This is the 3D model of the device.

3D model

The App

This is the app which will be connected with the device.

The App

3D model

This is the 3D model of the device.

3D model

Comments

Only logged in users can leave comments

rushilsaraswat

0 Followers

•

0 Projects

Intro

Trademarks & CopyrightsWhistleblowingDigital Services ActTerms of ServicePrivacy PolicySecurityCookie Settings

Report content