Arduino and OLED based Cellular Automata

Jumper wires (generic)

Solderless Breadboard Half Size

Arduino Nano

OLED 128x64

Original Page <a href="http://runtimeprojects.com/2016/02/arduino-and-oled-based-cellular-automata/">http://runtimeprojects.com/2016/02/arduino-and-oled-based-cellular-automata/</a>This project uses an I2C 128×64 OLED to display a tiny cellular automata powered by Arduino Nano.Prerequisites <ul ><li >2x small breadboards (or 1x standard)</li><li >1x Arduino Nano (can be Uno as well)</li><li >1x OLED I2C 128×64</li><li >4x Jumper wires</li></ul>AssumptionsDuring this tutorial I will assume that you know what an Arduino is (o_O) and you know how to use the IDE and upload simple sketches. I will also assume you know a little programming preferably C programming.So lets get started!!BackgroundWhat is Cellular Automata? I will explain 1 type of cellular automata which is the Game of Life by John Conway. It is a grid or cells each having 2 states True of False/on or off/alive or dead. These cells are governed by 2 simple rules:Rule 1: A cell which is dead and is surrounded by exactly 3 alive cells, will be bornRule 2: A cell which is alive and has either 3 or 2 alive cells will remain alive, else it diesSimple, no? If you need more information make a little visit to the <a href="https://en.wikipedia.org/wiki/Conway's_Game_of_Life">Game Of Life</a> or <a href="https://en.wikipedia.org/wiki/Cellular_automaton">Cellular Automata</a> on Wikipedia.CircuitrySo hook up the Arduino and OLED LCD to the breadboard and start wiring.<ul ><li >Arduino —– OLED</li><li >3.3v ———— VCC (pay attention to your OLED voltage requirements)</li><li >GND ———– GND</li><li >A4 ————– SDA</li><li >A5 ————– SCL</li></ul>Then I attached both breadboards back to back and created a small TV <div id="gallery"><img id="gallery" src= /><figcaption> </figcaption><img id="gallery" src= /><figcaption> </figcaption></div>Programming the sketchIn order to facilitate (and make it possible) to play with the OLED display, we will be using 2 libraries from Adafruit. If you don’t know how to add libraries please visit <a href="https://www.arduino.cc/en/Guide/Libraries">https://www.arduino.cc/en/Guide/Libraries</a><ul ><li >Adafruit GFX library which will be used to handle all graphics and text displayed on the OLED <a href="https://github.com/adafruit/Adafruit-GFX-Library">https://github.com/adafruit/Adafruit-GFX-Library</a></li><li >Adafruit SSD1306 library which basically is the driver for our OLED. This library works only with OLED SSD1306 128×32 and 128×64 <a href="https://github.com/adafruit/Adafruit_SSD1306">https://github.com/adafruit/Adafruit_SSD1306</a></li></ul>The sketch can be downloaded from our github: <a href="https://github.com/klauscam/Arduino-Cellular-Automata/">https://github.com/klauscam/Arduino-Cellular-Automata/</a>Some explanationOn line 51 with code<code >display.begin(SSD1306_SWITCHCAPVCC, 0x3C); //initialize with the I2C addr 0x3C (128x64)</code>the address, which is the 0x3C might be different. I searched for the most obvious and tried a few before getting it to work.Working ProductThe visible horizontal lines are the result of refresh rates of the OLED and the camera.<div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="//www.youtube.com/embed/CQOH0VfyzZQ?rel=0" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div>If you require some help with the code or anything, please leave your comments in the comments section below.ThanksTags: <a href="http://runtimeprojects.com/tag/arduino/">Arduino</a> <a href="http://runtimeprojects.com/tag/arduino-nano/">Arduino Nano</a> <a href="http://runtimeprojects.com/tag/cellular-automata/">Cellular Automata</a> <a href="http://runtimeprojects.com/tag/i2c/">I2C</a> <a href="http://runtimeprojects.com/tag/oled-display/">OLED Display</a> <a href="http://runtimeprojects.com/tag/tutorial/">Tutorial</a>

Arduino and OLED based Cellular Automata

Arduino and OLED based Cellular Automata aka Game Of Life