Foaling Monitor

1#include <SigFox.h>
2#include <ArduinoLowPower.h>
3
4const uint8_t  SWITCH_PIN = 1;
5const String payload = "HORSE!";
6const uint8_t debug = false;
7int  Count = 0; //Timer
8int Circle = 0; //Number message send. After 3 messages, go  sleep
9
10void setup() 
11{
12
13  if (debug == true) 
14  {
15    Serial.begin(9600);
16    while (!Serial) {};
17  }
18  
19  if (!SigFox.begin()) 
20  {
21    Serial.println("Shield  error or not present!");
22    return;
23  }
24  
25  delay(200);
26
27  //  Send the module to the deepest sleep
28  SigFox.end();
29
30  // Attach switch  pin and enable the interrupt 
31  pinMode(SWITCH_PIN, INPUT_PULLUP);
32
33  //  The mare lies on the side, switch close circuit
34  LowPower.attachInterruptWakeup(SWITCH_PIN,  CircuitClose, FALLING); 
35}
36
37void loop()
38{
39  LowPower.sleep();
40
41  Circle = 0;
42  Count = 0;
43  
44  //If the mare is lifted, switch is open  module goes sleep
45  //Or after 3 messages sent the module goes sleep 
46
47  delay(1000);
48
49  while (Circle!=1)
50
51  {
52   if (digitalRead (SWITCH_PIN)  == HIGH)
53   {
54    Circle = 1;
55   }
56   
57   // Timer Count
58   delay(1000);
59
60   Count++; 
61       
62   // Send message after 30s, 60s and 120s
63   if (Count  == 30 || Count == 60)
64   {
65    sendString(payload);
66   }
67
68   if (Count  == 120)
69   {
70    Circle = 1;
71    sendString(payload);
72   }
73   
74  }
75}
76
77void sendString(String str) 
78{
79  // Start the module
80  SigFox.begin();
81  // Wait at least 100mS
82  delay(100);
83  // Clears all pending interrupts
84  SigFox.status();
85  delay(1);
86
87  SigFox.beginPacket();
88  SigFox.print(str);
89
90  int ret = SigFox.endPacket();  // send buffer to SIGFOX network
91
92  SigFox.end();
93}
94
95
96void  CircuitClose() 
97{
98  
99}