Switch ON Bulb with TV remote

1#include <IRremote.h>
2
3
4//Relay PIN
5#define relePIN 12
6
7//IR  sensor PIN
8int RECV_PIN = 3;
9
10//Control LED PIN
11int LED_PIN = 10;
12
13IRrecv  irrecv(RECV_PIN);
14decode_results results;
15
16void setup()
17{
18  pinMode(relePIN,  OUTPUT);
19  pinMode(LED_PIN, OUTPUT);
20  Serial.begin(9600);
21  irrecv.enableIRIn();  // Start the receiver
22}
23
24void loop()
25{
26  if (irrecv.decode(&results))
27  {
28    Serial.print(results.value, HEX);
29    Serial.print(" - ");
30    Serial.println(results.value);
31    if (results.value == 4294967295){
32      digitalWrite(relePIN, HIGH); // Relay  ON
33      digitalWrite(LED_PIN, HIGH); // LED ON
34    } 
35    if (results.value  == 16769565){
36      digitalWrite(relePIN, LOW); // Relay OFF
37      digitalWrite(LED_PIN,  LOW); // LED OFF
38    } 
39    irrecv.resume(); // Receive the next value
40  }
41}