How To Create Your Very Own Soil Moisture Sensor

1#include <Ynvisible_Driver_4.2-1.0.0.h>
2
3
4int i2c_address = 43;         //The i2c address of driver board 4.1
5int number_of_segments = 7;  //Number  of segments on display (1-15)
6
7
8const int analogInPin = A2;   // Analog  input pin 
9int sensorValue = 0;          // Value read from the moisture sensor
10int  barValue = 0;             // Output value for the bar display sensor
11
12
13YNV_ECD  ECD(i2c_address, number_of_segments); //Initialize ECD Object
14
15 
16void setup()  {
17}
18
19void loop() {
20  sensorValue = analogRead(analogInPin); // Read  the value from the moisture sensor
21  barValue = map(sensorValue, 350, 850, 7,  0); // Mapping the value from the moisture sensor on a range from 0 to 7
22
23  
24  ECD.setBar(barValue); //Set the display with the output value mapped from  0 to 7  
25  delay(3000); //3 seconds delay between each update
26 
27}

1#include <Ynvisible_Driver_4.2-1.0.0.h>
2
3
4int i2c_address = 43;
5         //The i2c address of driver board 4.1
6int number_of_segments = 7;  //Number
7  of segments on display (1-15)
8
9
10const int analogInPin = A2;   // Analog
11  input pin 
12int sensorValue = 0;          // Value read from the moisture sensor
13int
14  barValue = 0;             // Output value for the bar display sensor
15
16
17YNV_ECD
18  ECD(i2c_address, number_of_segments); //Initialize ECD Object
19
20 
21void setup()
22  {
23}
24
25void loop() {
26  sensorValue = analogRead(analogInPin); // Read
27  the value from the moisture sensor
28  barValue = map(sensorValue, 350, 850, 7,
29  0); // Mapping the value from the moisture sensor on a range from 0 to 7
30
31
32  
33  ECD.setBar(barValue); //Set the display with the output value mapped from
34  0 to 7  
35  delay(3000); //3 seconds delay between each update
36 
37}