Simple RESCUE CUFF for Deep Bore Well trapped - Prototype

Drill, Screwdriver

Arduino Uno Rev3

MLX90640 Thermal Camera Breakout

Temperature and Humidity Sensor, 10 to 90% RH

Hose Clamp

Jumper wires (generic)

Pressure Sensor, Gauge

Grove - Oxygen Sensor(ME2-O2-Ф20)

Screw bit extension shaft

This project is about a RESCUE CUFF which can be helpful to lift a child / person fallen into a deep bore well.<div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/GgLT8KWWNgg" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div>In the above video one could see the simple mechanism for tightening the hose clamp at the bottom which can be used to hold the persons hands or legs.As first part of the project is over and the second part is to use ARDUINO to monitor the condition of the person trapped by using following sensors and cameras.1) Infrared Video camera2) Thermal imaging3) Oxygen Sensor4) Heat & RH sensor5) Pressure sensor etcThe second part is yet to be done.

Simple RESCUE CUFF for Deep Bore Well trapped - Prototype

Simple RESCUE CUFF for Deep Borewell trapped - Prototype