IoT old-fashioned mechanical switch

1#include "thingProperties.h"  // This includes Wi-Fi and cloud property definitions
2#include <Servo.h>            // Include the Servo library to control the servo motor
3
4#define SERVO_PIN 9  // Pin where the servo is connected
5
6Servo myServo;  // Create a Servo object
7
8void setup() {
9  // Initialize serial communication for debugging:
10  Serial.begin(9600);
11  delay(1500);  // Wait for Serial Monitor to open
12
13  // Initialize properties defined in thingProperties.h
14  initProperties();
15
16  // Connect to Arduino IoT Cloud
17  ArduinoCloud.begin(ArduinoIoTPreferredConnection);
18
19  // Print debug info to the Serial Monitor for cloud connection status
20  setDebugMessageLevel(2);  // Set debug info level (0 = errors only, up to 4 for full details)
21  ArduinoCloud.printDebugInfo();
22
23  // Attach the servo to the defined pin
24  myServo.attach(SERVO_PIN);
25  myServo.write(0);  // Initialize the servo at 0 degrees
26}
27
28void loop() {
29  // Keep Arduino IoT Cloud updated
30  ArduinoCloud.update();
31  
32  // You can add more code here if needed
33}
34
35/*
36  Since windowBlindTilt is a READ_WRITE variable, 
37  onWindowBlindTiltChange() is called whenever a new value is received from the IoT Cloud.
38*/
39void onWindowBlindTiltChange() {
40  // Try using .getBrightness() to retrieve the numeric value of windowBlindTilt
41  int tiltValue = windowBlindTilt.getBrightness();  // Assuming .getBrightness() is available
42  
43  // Map the dimming percentage (tiltValue) to the servo angle (0-180 degrees)
44  int servoAngle = map(tiltValue, 0, 100, 0, 180);
45  
46  // Move the servo to the calculated angle
47  myServo.write(servoAngle);
48
49  // Print the received dimming value and calculated servo angle for debugging
50  Serial.println("Window blind tilt set to: " + String(tiltValue) + "% (" + String(servoAngle) + "°)");
51}