Rainfall Measured Using Arduino

1#include <LiquidCrystal.h>
2const int rs = 12, en = 11, d4 = 5, d5 =  4, d6 = 3, d7 = 2;
3LiquidCrystal lcd(rs, en, d4, d5, d6, d7);
4void setup ()  {
5  // initialize serial communication at 9600 bits per second:
6  Serial.begin  (9600);}
7void loop() {
8  // read the input on analog pin 0:
9  int value  = analogRead(A0);
10  lcd.setCursor(0, 7);
11  if (value > 500) {
12    Serial.println("Very  heavy Rain");
13    lcd.print("Very heavy rain");}
14  else if ((value > 300)  && (value <= 500)) {
15    Serial.println("AVERAGE Rain");
16lcd.print("Average  Rain");
17lcd.print("       "); }
18  else{
19    Serial.println("Dry Weather");
20    lcd.print("Dry Wather");
21    lcd.print("          ");}
22  delay(100);}