Blynk Internet Clock

1#include <DHTesp.h>
2#include <WiFi.h>
3#include <PCD8544.h>
4#include  "driver/gpio.h"
5#include <SPI.h>
6#include <NTPClient.h>
7#include <WiFiUdp.h>
8#include  <Blynk.h>
9#include <WiFiClient.h>
10#include <WiFiServer.h>
11#include <BlynkSimpleEsp32.h>
12DHTesp  dht;
13const char* ssid     = "TIM-69381033";
14const char* password = "DT6vrJYAt6Z4bJ64";
15char  auth[] = "2c9cf057d5cd4207962e49220c646e19";
16int freq = 2000;
17int channel  = 0;
18int resolution = 8;
19int runMinutes = 0;
20int runHours = 0;
21int secsRemaining  = 0;
22int runSeconds = 0;
23static PCD8544 lcd = PCD8544(14, 13, 27, 26, 15);\\\\pin  of 5510 lcd
24#define BLYNK_PRINT Serial
25#define NTP_OFFSET  3600 // In seconds  
26#define NTP_INTERVAL 60 * 1000    // In miliseconds
27#define NTP_ADDRESS  "1.it.pool.ntp.org"
28WiFiUDP  ntpUDP;
29NTPClient timeClient(ntpUDP, NTP_ADDRESS, NTP_OFFSET, NTP_INTERVAL);
30BLYNK_WRITE(V1)  {
31  runHours = param[0].asLong() / 3600;
32  secsRemaining = param[0].asLong()  % 3600;
33  runMinutes = secsRemaining / 60;
34  runSeconds = secsRemaining %  60;
35}
36void setup() {
37  gpio_set_direction( GPIO_NUM_23, GPIO_MODE_OUTPUT);
38  gpio_set_level( GPIO_NUM_23, 1);
39  dht.setup(22);
40  Blynk.begin(auth, ssid,  password);
41  ledcSetup(channel, freq, resolution);
42  ledcAttachPin(12, channel);
43  lcd.begin(84, 48);
44  timeClient.begin();
45}
46void loop()
47{
48  Blynk.run();
49  timeClient.update();
50  float temperature = dht.getTemperature();
51   Blynk.virtualWrite(V6,  temperature);.
52  String formattedTime = timeClient.getFormattedTime();
53  lcd.clear();
54  // digital clock display of the time
55  lcd.setCursor(20, 1);
56  lcd.print(formattedTime);
57  int ore = timeClient.getHours();
58  int minuti = timeClient.getMinutes();
59  int secondi = timeClient.getSeconds();
60  if (minuti == runMinutes && ore ==  runHours)
61  {
62    ledcWriteTone(channel, 500);
63    delay(500);
64    ledcWriteTone(channel,  0);
65  }
66  delay(500);
67   }
68
69
70
71
72
73
74
75
76