Open Sliding Glass Door with Alexa!!!!

1//#include <ArduinoBLE.h>
2//#include <WifiS3.h>
3#include <hidboot.h>
4#include <usbhub.h>
5const byte Relay2 = 6;
6// Satisfy the IDE, which needs to see the include statment in the ino too.
7#ifdef dobogusinclude
8#include <spi4teensy3.h>
9#endif
10#include <SPI.h>
11int ledPinArdOn = 2;
12int ledPinMouseMove = 9;
13int PinSwitch = 8;
14int ledPinSwitch = 12;
15int Ard2On = 3;
16boolean LeftBtn = false;
17boolean LeftBtnRls = false;
18boolean MouseMoved = false;
19int x;
20int y;
21void (*resetFunc)(void) = 0;  // declare reset function at address 0
22class MouseRptParser : public MouseReportParser {
23protected:
24  void OnMouseMove(MOUSEINFO *mi);
25  void OnLeftButtonUp(MOUSEINFO *mi);
26  void OnLeftButtonDown(MOUSEINFO *mi);
27};
28void MouseRptParser::OnMouseMove(MOUSEINFO *mi) {
29  x = mi->dX;
30  y = mi->dY;
31  MouseMoved = true;
32};
33void MouseRptParser::OnLeftButtonUp(MOUSEINFO *mi) {
34  LeftBtnRls = true;
35};
36void MouseRptParser::OnLeftButtonDown(MOUSEINFO *mi) {
37  LeftBtn = true;
38};
39
40USB Usb;
41USBHub Hub(&Usb);
42HIDBoot<USB_HID_PROTOCOL_MOUSE> HidMouse(&Usb);
43
44MouseRptParser Prs;
45
46void setup() {
47  pinMode(ledPinArdOn, OUTPUT);
48  pinMode(ledPinMouseMove, OUTPUT);
49  pinMode(PinSwitch, INPUT_PULLUP);
50  pinMode(ledPinSwitch, OUTPUT);
51  pinMode(Ard2On, INPUT_PULLUP);
52  pinMode(Relay2, OUTPUT);
53  digitalWrite(Relay2, LOW);
54  delay(100);
55  Serial.begin(115200);
56#if !defined(__MIPSEL__)
57  while (!Serial)
58    ;
59#endif
60  Serial.println("Start");
61
62  if (Usb.Init() == -1)
63    Serial.println("OSC did not start.");
64
65  delay(200);
66
67  HidMouse.SetReportParser(0, &Prs);
68
69// if (digitalRead(Ard2On) == HIGH) {
70//   digitalWrite(ledPinArdOn, HIGH);  // Turn relay ON
71// } else {
72//   digitalWrite(ledPinArdOn, LOW);  // Turn relay OFF
73// }
74// if (digitalRead(PinSwitch) == HIGH) {
75//   digitalWrite(ledPinSwitch, HIGH);  // Pin 9
76//   delay(1500);
77// } else {
78//   digitalWrite(ledPinSwitch, LOW);
79//   delay(200);
80// }
81}
82void loop() {
83
84  Usb.Task();
85
86
87  if (MouseMoved) {
88    Serial.println("dx = ");
89    Serial.println(x);
90    Serial.println("dy = ");
91    Serial.println(" dy = ");
92    Serial.println(y);
93    digitalWrite(ledPinMouseMove, HIGH);  // Pin 9
94    delay(1500);
95    digitalWrite(ledPinMouseMove, LOW);
96    delay(200);
97
98    if ((digitalRead(PinSwitch) == HIGH) || (digitalRead(Ard2On) == HIGH)) {  // Pin 8 and 3
99
100      // digitalWrite(ledPinArdOn, HIGH);   // Pin 2
101      digitalWrite(ledPinSwitch, HIGH);  // Pin 12
102      delay(25000);
103      resetFunc();
104    } else {
105      if (digitalRead(PinSwitch) == LOW) {  // Pin 8
106        digitalWrite(ledPinSwitch, LOW);    // Pin 12
107      }
108      if (digitalRead(Ard2On) == LOW) {  // Pin 8
109        digitalWrite(ledPinArdOn, LOW);  // Pin 12
110      }
111    }
112    digitalWrite(Relay2, HIGH);
113    delay(25000);
114    digitalWrite(Relay2, LOW);
115    delay(100);
116    //
117    MouseMoved = false;
118    resetFunc();
119  }
120}

1//  Usage Date:  4-11-24
2
3#include <Servo.h>
4const byte Relay1 = 7;
5const byte Relay2 = 6;
6const byte Relay3 = 5;
7int Ard2On = 3;
8Servo myservo;  // create servo object to control a servo
9int pos = 0;    // variable to store the servo position
10
11void setup ()
12{
13
14   myservo.attach(8);  // attaches the servo on pin 9 to the servo object
15  pinMode(Ard2On, OUTPUT);
16  pinMode(Relay1, OUTPUT);
17  pinMode(Relay2, OUTPUT);
18  pinMode(Relay3, OUTPUT);
19//  pinMode(BUTTON1, INPUT_PULLUP); // set BUTTON as an input
20//  pinMode(BUTTON2, INPUT_PULLUP); // set BUTTON as an input
21//  pinMode(BUTTON3, INPUT_PULLUP); // set BUTTON as an input
22  // initialize serial communication:
23  Serial.begin(9600);
24  digitalWrite(Ard2On, HIGH);
25myservo.write(100);  
26    delay(1000);
27   digitalWrite(Relay3, LOW);
28    delay(300);
29    digitalWrite(Relay2, HIGH);
30    delay(500);
31    digitalWrite(Relay1, LOW);
32    delay(500);
33    digitalWrite(Relay3, HIGH);
34    delay(100);
35  }
36
37void loop ()
38{
39    delay(4000);
40
41    digitalWrite(Relay3, LOW);
42    delay(5000);
43    digitalWrite(Relay2, LOW);
44    delay(500);
45    digitalWrite(Relay1, HIGH);
46    delay(500);
47     digitalWrite(Relay3, HIGH);
48    delay(3500);
49
50 
51      myservo.write(70);  
52    delay(1000);  
53    digitalWrite(Relay3, LOW);
54    delay(500);
55
56    delay(30000);
57
58}