Tilt Ball Switch LED Buzzer Alarm!

1// Pin Variables
2const int LED_red = 8;
3const int LED_blue = 11;
4int  buzzerPin = 9;
5int tiltPin = 10;
6
7void setup() {
8  // put your setup  code here, to run once:
9  // setup pins
10  pinMode(LED_blue, OUTPUT);
11  pinMode(LED_red,  OUTPUT);
12  pinMode(buzzerPin, OUTPUT);
13  pinMode(tiltPin, INPUT_PULLUP);
14
15  // Make sure LED and buzzer are turned off
16  digitalWrite(LED_red, LOW);
17  digitalWrite(LED_blue, LOW);
18  digitalWrite(buzzerPin, LOW);
19
20}
21
22void  loop() {
23  // put your main code here, to run repeatedly:
24  if (digitalRead(tiltPin)  == HIGH) {
25    digitalWrite(buzzerPin, HIGH);
26    digitalWrite (LED_red, HIGH);
27    digitalWrite (LED_blue, LOW);
28    delay (250);
29    digitalWrite (LED_red,  LOW);
30    digitalWrite (LED_blue, HIGH);
31    delay (250);
32    digitalWrite  (LED_red, HIGH);
33    digitalWrite (LED_blue, LOW);
34    delay (250);
35    digitalWrite  (LED_red, LOW);
36    digitalWrite (LED_blue, HIGH);
37    delay (250);
38    digitalWrite  (LED_red, HIGH);
39    digitalWrite (LED_blue, LOW);
40    delay (250);
41    digitalWrite  (LED_red, LOW);
42    digitalWrite (LED_blue, HIGH);
43    delay (250);
44    digitalWrite  (LED_red, HIGH);
45    digitalWrite (LED_blue, LOW);
46    delay (250);
47    digitalWrite  (LED_red, LOW);
48    digitalWrite (LED_blue, HIGH);
49    delay (250);
50    digitalWrite  (LED_red, HIGH);
51    digitalWrite (LED_blue, LOW);
52    delay (250);
53    digitalWrite  (LED_red, LOW);
54    digitalWrite (LED_blue, HIGH);
55    delay (250);
56    digitalWrite  (LED_red, HIGH);
57    digitalWrite (LED_blue, LOW);
58    delay (250);
59    digitalWrite  (LED_red, LOW);
60    digitalWrite (LED_blue, HIGH);
61    delay (250);
62    digitalWrite  (LED_red, HIGH);
63    digitalWrite (LED_blue, LOW);
64    delay (250);
65    digitalWrite  (LED_red, LOW);
66    digitalWrite (LED_blue, HIGH);
67    delay (250);
68    digitalWrite  (LED_red, HIGH);
69    digitalWrite (LED_blue, LOW);
70    delay (250);
71    digitalWrite  (LED_red, LOW);
72    digitalWrite (LED_blue, HIGH);
73    delay (250);
74    digitalWrite  (LED_red, HIGH);
75    digitalWrite (LED_blue, LOW);
76    delay (250);
77    digitalWrite  (LED_red, LOW);
78    digitalWrite (LED_blue, HIGH);
79    delay (250);
80    digitalWrite  (LED_red, HIGH);
81    digitalWrite (LED_blue, LOW);
82    delay (250);
83    digitalWrite  (LED_red, LOW);
84    digitalWrite (LED_blue, HIGH);
85    delay (250);
86    
87  }
88  
89  if (digitalRead(tiltPin) == LOW) {
90    digitalWrite(LED_red, LOW);
91    digitalWrite(LED_blue, LOW);
92    digitalWrite(buzzerPin, LOW);
93  }
94}