Autognorics: The Science of Making a Living Machine

This is a sample intuitive code similar to the natural biological inscriptional codes of an organism. Please be aware that although the codes and schematics are included on this page, they were never intended to be anything else than for reference purposes. Inaccuracies, issues, or missing pieces of information might be found in this project.

1/* BioTronics Exyzforms */
2
3#include <Servo.h> 
4int spkr = 4;                  
5int led = 13;                 
6int sensor = 5;               
7int   state = LOW;              
8int val = 0;                  
9int pos = 0;
10int   var = 0;
11 
12
13void setup() {
14  pinMode(led, OUTPUT);       
15 pinMode(spkr,   OUTPUT);       
16  pinMode(sensor, INPUT);    
17  Serial.begin(9600);         
18    
19}
20
21void loop(){
22  val = digitalRead(sensor);    
23  if (val ==   HIGH) {            
24    Serial.println("Motion detected!"); 
25 while(var   < 10) {        
26        digitalWrite(13, HIGH);
27        delay(1000); 
28        digitalWrite(13, LOW);
29       delay(1000); 
30       tone(4, 440, 200);
31       var++;
32       }
33   var=0;
34   
35    if (state == LOW) {
36      digitalWrite(led,   HIGH);    
37      state = HIGH;        
38    }
39  } 
40  else {
41      digitalWrite(led,   LOW); 
42      delay(200);               
43      
44      if (state == HIGH){
45         Serial.println("Motion stopped!");
46        state = LOW;        
47     }
48  }
49
50
51
52
53

/* BioTronics Exyzforms */

#include <Servo.h> 
int spkr = 4;                  
int led = 13;                 
int sensor = 5;               
int   state = LOW;              
int val = 0;                  
int pos = 0;
int   var = 0;
 

void setup() {
  pinMode(led, OUTPUT);       
 pinMode(spkr,   OUTPUT);       
  pinMode(sensor, INPUT);    
  Serial.begin(9600);         
    
}

void loop(){
  val = digitalRead(sensor);    
  if (val ==   HIGH) {            
    Serial.println("Motion detected!"); 
 while(var   < 10) {        
        digitalWrite(13, HIGH);
        delay(1000); 
        digitalWrite(13, LOW);
       delay(1000); 
       tone(4, 440, 200);
       var++;
       }
   var=0;
   
    if (state == LOW) {
      digitalWrite(led,   HIGH);    
      state = HIGH;        
    }
  } 
  else {
      digitalWrite(led,   LOW); 
      delay(200);               
      
      if (state == HIGH){
         Serial.println("Motion stopped!");
        state = LOW;        
     }
  }

Exyzforms

arduino

1/* BioTronics Exyzforms */
2
3#include <Servo.h> 
4int spkr = 4;                 
5int led = 13;                 
6int sensor = 5;               
7int  state = LOW;              
8int val = 0;                  
9int pos = 0;
10int  var = 0;
11 
12
13void setup() {
14  pinMode(led, OUTPUT);       
15 pinMode(spkr,  OUTPUT);       
16  pinMode(sensor, INPUT);    
17  Serial.begin(9600);         
18   
19}
20
21void loop(){
22  val = digitalRead(sensor);    
23  if (val ==  HIGH) {            
24    Serial.println("Motion detected!"); 
25 while(var  < 10) {        
26        digitalWrite(13, HIGH);
27        delay(1000); 
28       digitalWrite(13, LOW);
29       delay(1000); 
30       tone(4, 440, 200);
31      var++;
32       }
33   var=0;
34   
35    if (state == LOW) {
36      digitalWrite(led,  HIGH);    
37      state = HIGH;        
38    }
39  } 
40  else {
41      digitalWrite(led,  LOW); 
42      delay(200);               
43      
44      if (state == HIGH){
45        Serial.println("Motion stopped!");
46        state = LOW;        
47    }
48  }
49
50
51
52
53

/* BioTronics Exyzforms */

#include <Servo.h> 
int spkr = 4;                 
int led = 13;                 
int sensor = 5;               
int  state = LOW;              
int val = 0;                  
int pos = 0;
int  var = 0;
 

void setup() {
  pinMode(led, OUTPUT);       
 pinMode(spkr,  OUTPUT);       
  pinMode(sensor, INPUT);    
  Serial.begin(9600);         
   
}

void loop(){
  val = digitalRead(sensor);    
  if (val ==  HIGH) {            
    Serial.println("Motion detected!"); 
 while(var  < 10) {        
        digitalWrite(13, HIGH);
        delay(1000); 
       digitalWrite(13, LOW);
       delay(1000); 
       tone(4, 440, 200);
      var++;
       }
   var=0;
   
    if (state == LOW) {
      digitalWrite(led,  HIGH);    
      state = HIGH;        
    }
  } 
  else {
      digitalWrite(led,  LOW); 
      delay(200);               
      
      if (state == HIGH){
        Serial.println("Motion stopped!");
        state = LOW;        
    }
  }

Downloadable files

A sample emulator

Comments

Only logged in users can leave comments

ihacklab

0 Followers

•

0 Projects

Intro

Trademarks & CopyrightsWhistleblowingDigital Services ActTerms of ServicePrivacy PolicySecurityCookie Settings

Report content