COVID19 Realtime Monitor

AZ-Touch

Arduino IDE

Arduino MKR WiFi 1010

<p >This little tracker will help you to be up to date about the coronvavirus outbreak and the situation in your country. The display shows alternating the current data of different countries of your choice.</p><p ><span >The data is collected by the website </span><a href="http://www.worldometers.info/coronavirus/">www.worldometers.info/coronavirus/</a></p><h3 >Hardware</h3><p ><span >I've used our </span><a href="https://www.hwhardsoft.de/english/projects/arduitouch-mkr/">AZ-Touch kit</a><span > for Arduino MKR as hardware plattform. This kit comes with a 2.4 inch tft touchscreen, which will be used for the data output.</span></p><figure><img src=https://projects.arduinocontent.cc/b8e8250b-6102-4ceb-bcba-1e3c46995894.jpg /><figcaption>AZ-Touch kit for Arduino MKR</figcaption></figure><h3 >Software</h3><p >The tracker is using SSL communication with the website worldometers.info It is necessary needed to add this URL via the WiFi101 / WiFiNINA Firmware Updater of the Arduino IDE to the Arduino MKR WiFi 1010 board</p><figure><img src=https://projects.arduinocontent.cc/92df2c53-d743-46cf-a61c-dc15f4a464a0.png /><figcaption> </figcaption></figure><p >Furthermore you can change/add/delete the countries in the main loop of the program according your interests.</p><figure><img src=https://projects.arduinocontent.cc/771d728e-149a-4710-9ff7-45d9302a6f9d.png /><figcaption> </figcaption></figure><p >Please check the correct names of the needed countries on www.worldometers.info/coronavirus/</p>

COVID19 Realtime Monitor

This small project shows the current data of coronavirus outbreak of different countries in realtime on a 2.4 inch TFT.