Full Control of Your TV Using Alexa and Arduino IoT Cloud

IR transmitter (generic)

Arduino Nano 33 IoT

Resistor 330 ohm

Amazon Alexa Official Arduino Skill

Jumper wires (generic)

Arduino IoT Cloud

Breadboard (generic)

IR receiver (generic)

Arduino Web Editor

<html><body>Note: This tutorial could be outdated, please go here for a more current version. <h3>Intro: Arduino IoT Cloud</h3><a href="https://create.arduino.cc/iot/">Arduino IoT Cloud </a>is a platform that enables anyone to build IoT connected object with ease. In order to control our TV using Alexa, we'll also be using the <a href="https://www.amazon.com/Arduino-LLC/dp/B07ZT2PK2H">Official Arduino Alexa Skill </a>. If you are new to Arduino IoT Cloud, we advise to first take a look at <a href="https://create.arduino.cc/projecthub/133030/iot-cloud-getting-started-c93255">this introductory project </a>, which will give you an overview and guide you through the process of setting up one of the supported boards, IoT Cloud Things and Properties and get you onboard. <h3>Part 1: How to Control a TV Set</h3>The easiest way to control any kind of television, is to act as if we were its very own remote infrared controller. In order to do so, we'll have to listen for the signals the remote will send, capture the data and mimick it with our Arduino board. Once the circuit is assembled, we'll upload <a href="https://create.arduino.cc/example/library/irremote_2_2_3/irremote_2_2_3%5Cexamples%5CIRrecvDumpV2/IRrecvDumpV2/preview">this sketch </a>to our board. It will traslate the IR signal bursts generated by remote button presses into an array of unsigned integers. Let's point the remote at the Arduino IR Receiver we built and press the following buttons: <ol><li>POWER/STANDBY </li></ol><ol><li>CHANNELS FROM 1 TO 9 </li></ol><ol><li>VOLUME UP </li></ol><ol><li>VOLUME DOWN </li></ol><ol><li>MUTE </li></ol><ol><li>CHANNEL UP </li></ol><ol><li>CHANNEL DOWN </li></ol>We'll see the values coming through the Serial Monitor , reported as <code class="code">rawData </code>. Let's take note of them into a text file for now, and assign each list its own array name ( <code class="code">chan1 </code>, <code class="code">chan2 </code>and so on). The following values are just for reference, and are generated by a Samsung's TV remote. <pre>CHANNEL 1 </pre><pre>unsigned int chan1[67] = {4450,4500, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,1700, 550,1700, 500,600, 500,600, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,600, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,1700, 550,600, 500,1700, 550,1700, 550,1700, 500,1700, 550,1700, 500}; </pre><pre>CHANNEL 2 </pre><pre>unsigned int chan2[67] = {4500,4500, 550,1700, 500,1700, 550,1700, 550,550, 550,550, 550,600, 500,600, 550,600, 500,1700, 550,1700, 500,1700, 550,600, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,600, 550,1700, 500,600, 550,550, 550,600, 500,600, 550,550, 550,650, 450,1700, 550,600, 500,1700, 550,1700, 500,1700, 550,1700, 550,1700, 500}; </pre><pre>CHANNEL 3 </pre><pre>unsigned int chan3[67] = {4500,4500, 500,1700, 550,1700, 550,1700, 500,600, 550,550, 550,600, 500,600, 550,550, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,1700, 550,600, 550,550, 550,550, 550,600, 550,550, 550,1700, 500,600, 550,550, 550,1700, 550,1650, 550,1700, 550,1700, 500,1700, 600}; </pre><pre>CHANNEL 4 </pre><pre>unsigned int chan4[67] = {4450,4450, 550,1700, 550,1700, 500,1700, 550,600, 500,600, 550,550, 600,550, 500,600, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,1700, 550,1700, 500,600, 550,1700, 500,1700, 550,1700, 550,1700, 500}; </pre><pre>CHANNEL 5 </pre><pre>unsigned int chan5[67] = {4500,4500, 500,1700, 550,1700, 550,1700, 550,550, 550,550, 550,550, 600,550, 550,550, 550,1700, 550,1650, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,600, 500,600, 550,1700, 500,600, 550,550, 550,600, 550,550, 550,550, 550,1700, 550,1700, 500,600, 550,1700, 500,1700, 550,1700, 550,1700, 500}; </pre><pre>CHANNEL 6 </pre><pre>unsigned int chan6[67] = {4500,4500, 550,1650, 550,1700, 550,1700, 500,600, 550,550, 550,600, 500,600, 500,600, 550,1700, 500,1700, 550,1700, 550,550, 600,550, 500,600, 550,550, 600,550, 550,550, 550,1700, 500,600, 550,1700, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,600, 550,1700, 500,600, 550,1650, 600,1650, 550,1700, 550,1650, 600}; </pre><pre>CHANNEL 7 </pre><pre>unsigned int chan7[67] = {4500,4500, 550,1700, 500,1700, 550,1750, 500,550, 550,600, 500,650, 500,550, 550,550, 550,1750, 500,1700, 500,1700, 550,650, 450,650, 500,550, 550,600, 500,650, 500,550, 550,600, 500,1700, 550,1750, 500,600, 500,550, 550,600, 500,650, 500,1750, 450,1700, 550,600, 500,650, 500,1700, 500,1700, 550,1750, 500,1700, 500}; </pre><pre>CHANNEL 8 </pre><pre>unsigned int chan8[67] = {4450,4550, 500,1700, 550,1700, 550,1650, 550,600, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,600, 500,1700, 550,1700, 500,600, 550,550, 550,650, 450,600, 550,550, 550,1700, 550,550, 550,600, 500,1700, 550,1700, 550,1700, 500,1700, 550}; </pre><pre>CHANNEL 9 </pre><pre>unsigned int chan9[67] = {4450,4500, 550,1700, 550,1700, 500,1700, 550,600, 500,600, 550,550, 550,600, 500,600, 550,1700, 500,1700, 550,1700, 500,600, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,1700, 550,1700, 500,600, 550,550, 550,550, 550,600, 500,1700, 550,600, 500,600, 550,550, 550,1700, 550,1700, 500,1700, 550,1700, 550}; </pre><pre>VOLUME UP </pre><pre>unsigned int volUp[67] = {4500,4500, 550,1700, 500,1750, 500,1700, 550,600, 500,600, 500,600, 550,550, 550,600, 500,1700, 550,1700, 550,1700, 500,650, 450,600, 550,600, 500,650, 450,650, 500,1700, 500,1750, 500,1750, 500,550, 550,600, 500,650, 500,550, 550,600, 500,650, 500,600, 500,600, 500,1700, 550,1750, 450,1750, 500,1700, 550,1700, 500}; </pre><pre>VOLUME DOWN </pre><pre>unsigned int volDown[67] = {4450,4550, 500,1700, 550,1700, 550,1650, 550,600, 550,550, 550,600, 500,600, 500,600, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 500,600, 550,550, 550,600, 500,1700, 550,1700, 550,600, 500,1700, 550,600, 500,600, 500,600, 550,550, 550,600, 500,650, 500,1700, 500,650, 500,1700, 500,1750, 500,1700, 550,1700, 500}; </pre><pre>CHANNEL UP </pre><pre>unsigned int chanUp[67] = {4500,4450, 550,1700, 550,1650, 550,1700, 550,550, 550,600, 550,550, 550,550, 600,550, 550,1650, 550,1700, 550,1650, 600,550, 550,550, 550,600, 500,600, 550,550, 550,550, 550,1700, 550,550, 600,550, 550,1650, 550,600, 550,550, 550,550, 550,1700, 550,550, 550,1700, 550,1700, 550,550, 550,1650, 600,1650, 550,1700, 550}; </pre><pre>CHANNEL DOWN </pre><pre>unsigned int chanDown[67] = {4500,4450, 600,1650, 550,1700, 550,1650, 550,600, 550,550, 550,550, 550,600, 500,600, 550,1700, 500,1700, 550,1700, 550,550, 550,600, 550,550, 550,550, 550,550, 600,550, 550,550, 550,600, 500,600, 550,1650, 600,550, 550,550, 550,550, 600,1650, 550,1700, 500,1700, 600,1650, 550,550, 600,1650, 550,1700, 500,1700, 550}; </pre><h3>Part 2: Arduino IoT Cloud</h3>From the main Arduino IoT Cloud page, we'll create a new Thing and assign it a meaningful name. Let's call it TVRemoteController . We'll then select the board we are going to use. For this tutorial we used an Arduino Nano 33 IoT, but if you have another compatible board it will also be fine, just keep in mind that the pinout and the behavior of the IR library might change. If at this point you cannot see your board, you might have skipped the Getting Started procedure we mentioned above, if this is the case, go back through that process. Once done, we'll add one Property to our Thing , it will represent our TV set. Under the Smart Home category, select "TV" as Property Type, set it as "Read &amp; Write", and under "Update" select "When the value changes". Here it is what the Properties view of our Thing should look like at this point: <figure><img src="https://projects.arduinocontent.cc/847568dd-b2b2-4bb8-9701-5914c956b628.png"/><figcaption></figcaption></figure> <h3>Part 3: Arduino Web Editor</h3>The time has come to click on the "Sketch" tab, which will show the embedded sketch editor, where we can add some custom code to the Sketch automatically generated by IoT Cloud. The first thing we have to include is the <a href="https://github.com/z3t0/Arduino-IRremote">IR Remote </a>library, by Ken Shirriff. <pre>#include &lt;IRremote.h&gt; </pre>We then have to setup one two-dimensional array for our channels, and 6 arrays for the commands we need. If you remember, in Part 1 we captured some IR data which we'll now use to fill our arrays <pre>const unsigned int chan[9][67] = { </pre><pre>	{chan1}, </pre><pre>	{chan2}, </pre><pre>	{chan3}, </pre><pre>	{chan4}, </pre><pre>	{chan5}, </pre><pre>	{chan6}, </pre><pre>	{chan7}, </pre><pre>	{chan8}, </pre><pre>	{chan9} </pre><pre>}; </pre><pre>const unsigned int volUp[67] = {...}; </pre><pre>const unsigned int volDown[67] = {...}; </pre><pre>const unsigned int chanUp[67] = {...}; </pre><pre>const unsigned int chanDown[67] = {...}; </pre><pre>const unsigned int onoff[67] = {...}; </pre><pre>const unsigned int mute[67] = {...}; </pre>Let's then setup the IR library and the required frequency (for this kind of application it will always be 38KHz) <pre>IRsend irsend; </pre><pre>const int freq = 38; </pre>We'll also need a function to send out IR commands and blink the built-in LED (at this stage mostly for debugging purposes). The delay value used will depend on the make and model of your television, so feel free to tweak it if things aren't working as expected (wrong commands or no commands received). <pre>void sendIR(const unsigned int buf[]) { </pre><pre>	digitalWrite(LED_BUILTIN, HIGH); </pre><pre>	irsend.sendRaw(buf, 67, freq); </pre><pre>	delay(300); </pre><pre>	digitalWrite(LED_BUILTIN, LOW); </pre><pre>} </pre>The final step is to complete the generated callback <code class="code">onTvChange() </code>with some custom code in order to send IR commands when the TV property is changed by Alexa commands. For example, if the volume is increased, we have to virtually press the button Volume Up, if the channel is set to 7, we have to send the sequence for the channel 7 button, and so on. <pre>void onTvChange() { </pre><pre>	Serial.println("=================="); </pre><pre>	Serial.println("Switch:"+String(tv.getSwitch())); </pre><pre>	Serial.println("Volume:"+String(tv.getVolume())); </pre><pre>	Serial.println("Channel:"+String(tv.getChannel())); </pre><pre>	Serial.println("Mute:"+String(tv.getMute())); </pre><pre>	Serial.println("=================="); </pre><pre>	if (first){ </pre><pre>	 prevSwitch = tv.getSwitch(); </pre><pre>	 prevVolume = tv.getVolume(); </pre><pre>	 prevChannel = tv.getChannel(); </pre><pre>	 prevMute = tv.getMute(); </pre><pre>	 first = false; </pre><pre>	 return; </pre><pre>	} </pre><pre>	// Volume changed </pre><pre>	if (tv.getVolume() &gt; prevVolume) { </pre><pre>	 tv.setMute(false); </pre><pre>	 prevMute = false; </pre><pre>	 for (int k = prevVolume + 1 ; k&lt;=tv.getVolume(); k++) { </pre><pre>	 sendIR(volUp); </pre><pre>	 Serial.println("Volume requested:"+String(tv.getVolume())+" Set:"+String(k)); </pre><pre>	 } </pre><pre>	 prevVolume = tv.getVolume(); </pre><pre>	} </pre><pre>	else if (tv.getVolume() &lt; prevVolume) { </pre><pre>	 tv.setMute(false); </pre><pre>	 prevMute = false; </pre><pre>	 for (int k = prevVolume - 1; k&gt;=tv.getVolume(); k--) { </pre><pre>	 sendIR(volDown); </pre><pre>	 Serial.println("Volume changed:"+String(tv.getVolume())+" Set:"+String(k)); </pre><pre>	 } </pre><pre>	 prevVolume = tv.getVolume(); </pre><pre>	} </pre><pre>	// Mute changed </pre><pre>	if (tv.getMute() != prevMute &amp;&amp; tv.getMute()) { </pre><pre>	 prevMute = tv.getMute(); </pre><pre>	 sendIR(mute); </pre><pre>	 Serial.println("Mute changed:"+String(tv.getMute())); </pre><pre>	} </pre><pre>	else if (tv.getMute() != prevMute &amp;&amp; !tv.getMute()) { </pre><pre>	 prevMute = tv.getMute(); </pre><pre>	 sendIR(mute); </pre><pre>	 Serial.println("Mute changed:"+String(tv.getMute())); </pre><pre>	} </pre><pre>	// Channel changed </pre><pre>	if (tv.getChannel() != prevChannel) { </pre><pre>	 int newChannel = tv.getChannel(); </pre><pre>	 if (newChannel &gt; 0 &amp;&amp; newChannel &lt; 10) { </pre><pre>	 sendIR(chan[newChannel-1]); </pre><pre>	 } else if (newChannel &gt; 9) { </pre><pre>	 if (newChannel &gt; prevChannel) { </pre><pre>	 for (int ch = prevChannel; ch &lt; newChannel; ch++) { </pre><pre>	 sendIR(chanUp); </pre><pre>	 Serial.println("Chan requested:"+String(newChannel)+" Set:"+String(ch)); </pre><pre>	 } </pre><pre>	 } else if (newChannel &lt; prevChannel) { </pre><pre>	 for (int ch = prevChannel; ch &gt; newChannel; ch--) { </pre><pre>	 sendIR(chanDown); </pre><pre>	 Serial.println("Chan requested:"+String(newChannel)+" Set:"+String(ch)); </pre><pre>	 } </pre><pre>	 } </pre><pre>	 } </pre><pre>	 prevChannel = newChannel; </pre><pre>	 Serial.println("Channel changed:"+String(tv.getChannel())); </pre><pre>	} </pre><pre>	// On/Off changed </pre><pre>	if (tv.getSwitch() != prevSwitch) { </pre><pre>	 prevSwitch = tv.getSwitch(); </pre><pre>	 if (tv.getSwitch()) { </pre><pre>	 sendIR(chan[6]); </pre><pre>	 } else { </pre><pre>	 sendIR(onoff); </pre><pre>	 } </pre><pre>	 Serial.println("Switch changed:"+String(tv.getSwitch())); </pre><pre>	} </pre><h3>Part 4: Amazon Alexa</h3>We will now need the Amazon Alexa app which can be downloaded from the <a href="https://apps.apple.com/us/app/amazon-alexa/id944011620">Apple App Store </a>or the <a href="https://play.google.com/store/apps/details?id=com.amazon.dee.app">Google Play Store </a>. Once installed, login with your existing account or create a new one. Let's go through the steps necessary to install the Arduino Alexa Skill and configure it to access and control our TV. We'll follow the sequence of images below to see all the required steps. <figure><img src="https://projects.arduinocontent.cc/7b0bfce1-e8a6-4895-ad36-e71f2f8dd086.png"/><figcaption>1/11: Tap on "Devices"</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/41b635a4-07a0-4f46-b81e-0bc4e22a6089.png"/><figcaption>2/11: Let's now enable our Smart Home Skills</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/e569ba98-c2b3-4401-82ee-07e9a3a89cec.png"/><figcaption>3/11: We'll be presented with the featured ones. Time to search for what we need :)</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/4fc01cb3-4152-43b9-960c-2af3f2810042.png"/><figcaption>4/11: Typing "Arduino" and tapping "search" we'll obtain a list. That's the one we need!</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/f00c8e07-7b88-467e-aa8c-1f6b6552a210.png"/><figcaption>5/11: Once selected, we'll have to enable it</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/4d1e836a-e51e-4824-afdd-1b3a5d165bec.png"/><figcaption>6/11: Let's login with our Arduino Create account credentials</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/79f74d6c-c205-492c-9b8c-aa206b9e76b7.png"/><figcaption>7/11: Our Alexa and Arduino IoT Cloud can now talk to each other :)</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/03fe167d-cc58-4031-89b9-9f6db360a369.png"/><figcaption>8/11: Time to discover our devices</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/90397358-2ca6-4646-916c-b156a6eb20bb.png"/><figcaption>9/11: A little bit of patience won't hurt...</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/891e1cb5-35d7-407f-83b9-f13b0359a422.png"/><figcaption>10/11: There is our TV, managed by IoT Cloud! Exciting :)</figcaption></figure><figure><img src="https://projects.arduinocontent.cc/b190e51d-ebc7-4060-9937-1e6bba592dc6.png"/><figcaption>11/11: Let's tap on it to make sure it is enabled</figcaption></figure>We're done, it's now time to voice control our TV asking things like <ol><li>”Alexa, turn the volume up on TV.” </li></ol><ol><li>”Alexa, mute TV" or “Alexa, unmute TV.” </li></ol><ol><li>”Alexa, next channel on TV.” </li></ol>Have fun playing with Alexa and IoT Cloud. If you have questions and/or build this project let us know in the comments below. Thank you, The Arduino Team </body></html>

Nano 33 IoT Schematics

Arduino

Full Control of Your TV Using Alexa and Arduino IoT Cloud

Learn how to use Arduino IoT Cloud and Amazon Alexa to switch the channel, adjust the volume and turn on or off any TV.