All in one clock 1.0

Cura Slicer

Arduino Proto Shield

Real Time Clock (RTC)

Buzzer

Hot glue gun (generic)

16x2 LCD display with I²C interface

Cutter

Breadboard (generic)

AM2302 DHT22

Tactile Switch, Top Actuated

Arduino IDE

SolderWire

3D Printer (generic)

Hook Up Wire Kit, 22 AWG

Soldering iron (generic)

Arduino Uno Rev3

<html><body><p>In this project, we will make an Arduino clock alarm with a timer and a temperature sensor. </p><h3>Wiring:</h3><figure><img src="https://projects.arduinocontent.cc/053a7cc5-23e4-4cb2-9f01-6fb34ee95bf2.jpg"/><figcaption></figcaption></figure><p><strong>Button #1 Mode: </strong>connected to digital pin 2 </p><p><strong>Button #2 Select: </strong>connected to digital pin 4 </p><p><strong>Button #3 Plus: </strong>connected to digital Pin 3 </p><p><strong>Button #4 Minus: </strong>connected to digital pin 12 </p><p><strong>Button #5 Timer on/0ff: </strong>connected to digital pin 11 </p><p>You can wire all of the components to a breadboard or wire them to an Arduino proto shield if you would like to use the case. </p><h3>libraries:</h3><p>DHT - <a href="https://github.com/adafruit/DHT-sensor-library">https://github.com/adafruit/DHT-sensor-library </a></p><p>LiquidCrystal I2C - <a href="https://www.arduinolibraries.info/libraries/liquid-crystal-i2-c">https://www.arduinolibraries.info/libraries/liquid-crystal-i2-c </a></p><p>Wire - <a href="https://github.com/arduino/ArduinoCore-avr/tree/master/libraries/Wire">https://github.com/arduino/ArduinoCore-avr/tree/master/libraries/Wire </a></p><p>virtuabotixRTC - <a href="https://github.com/chrisfryer78/ArduinoRTClibrary">https://github.com/chrisfryer78/ArduinoRTClibrary </a></p><p>RTCLib - <a href="https://github.com/adafruit/RTClib">https://github.com/adafruit/RTClib </a></p><h3>Usage:</h3><ol><li>Change between screens by pressing the mode button. </li><li>Set time by holding the mode button on screen 1. </li><li>Screen 1: Time, date, and temperature </li><li>Screen 2: Set up the alarm. </li><li>Screen 3: timer </li><li>Screen 4: Alarm On/Off </li></ol><p>To navigate between all of the screen we will use the mode button. </p><p>Each button has its own use the + and - buttons are most used to add to a number or decrse, The selecet button is sually to go between couple of options and the timer button is to start or stop the timer. </p><h3>Version 2.0</h3><p>For version 2.o follow this link: <a href="https://projecthub.arduino.cc/dzh121/e16d7aad-c3fc-49c0-8b4e-9a7b9166efa8">All In One Clock 2.0 </a></p><h3>GitHub:</h3><p><a href="https://github.com/dzh121/All-In-One-Clock-1.0">https://github.com/dzh121/All-In-One-Clock-1.0</a></p><p> </p></body></html>

3d models

Code

All in one clock 1.0

Clock alarm, temperature senser, and timer, all in one device using an Arduino Uno and RTC