Arduino Giga R1 WiFi Joystick

1/*
2 * This Arduino Giga R1 WiFi code was developed by newbiely.com
3 *
4 * This Arduino Giga R1 WiFi code is made available for public use without any restriction
5 *
6 * For comprehensive instructions and wiring diagrams, please visit:
7 * https://newbiely.com/tutorials/arduino-giga/arduino-giga-r1-wifi-joystick
8 */
9
10#define VRX_PIN  A1 // The Arduino Giga R1 WiFi pin connected to VRX pin
11#define VRY_PIN  A0 // The Arduino Giga R1 WiFi pin connected to VRY pin
12
13#define LEFT_THRESHOLD  400
14#define RIGHT_THRESHOLD 800
15#define UP_THRESHOLD    400
16#define DOWN_THRESHOLD  800
17
18#define COMMAND_NO     0x00
19#define COMMAND_LEFT   0x01
20#define COMMAND_RIGHT  0x02
21#define COMMAND_UP     0x04
22#define COMMAND_DOWN   0x08
23
24int xValue = 0 ; // To store value of the X axis
25int yValue = 0 ; // To store value of the Y axis
26int command = COMMAND_NO;
27
28void setup() {
29  Serial.begin(9600) ;
30}
31
32void loop() {
33  // read analog X and Y analog values
34  xValue = analogRead(VRX_PIN);
35  yValue = analogRead(VRY_PIN);
36
37  // converts the analog value to commands
38  // reset commands
39  command = COMMAND_NO;
40
41  // check left/right commands
42  if (xValue < LEFT_THRESHOLD)
43    command = command | COMMAND_LEFT;
44  else if (xValue > RIGHT_THRESHOLD)
45    command = command | COMMAND_RIGHT;
46
47  // check up/down commands
48  if (yValue < UP_THRESHOLD)
49    command = command | COMMAND_UP;
50  else if (yValue > DOWN_THRESHOLD)
51    command = command | COMMAND_DOWN;
52
53  // NOTE: AT A TIME, THERE MAY BE NO COMMAND, ONE COMMAND OR TWO COMMANDS
54
55  // print command to serial and process command
56  if (command & COMMAND_LEFT) {
57    Serial.println("COMMAND LEFT");
58    // TODO: add your task here
59  }
60
61  if (command & COMMAND_RIGHT) {
62    Serial.println("COMMAND RIGHT");
63    // TODO: add your task here
64  }
65
66  if (command & COMMAND_UP) {
67    Serial.println("COMMAND UP");
68    // TODO: add your task here
69  }
70
71  if (command & COMMAND_DOWN) {
72    Serial.println("COMMAND DOWN");
73    // TODO: add your task here
74  }
75}

1/*
2 * This Arduino Giga R1 WiFi code was developed by newbiely.com
3 *
4 * This Arduino Giga R1 WiFi code is made available for public use without any restriction
5 *
6 * For comprehensive instructions and wiring diagrams, please visit:
7 * https://newbiely.com/tutorials/arduino-giga/arduino-giga-r1-wifi-joystick
8 */
9
10#define VRX_PIN  A1 // The Arduino Giga R1 WiFi pin connected to VRX pin
11#define VRY_PIN  A0 // The Arduino Giga R1 WiFi pin connected to VRY pin
12
13int xValue = 0; // To store value of the X axis
14int yValue = 0; // To store value of the Y axis
15
16void setup() {
17  Serial.begin(9600) ;
18}
19
20void loop() {
21  // read analog X and Y analog values
22  xValue = analogRead(VRX_PIN);
23  yValue = analogRead(VRY_PIN);
24
25  // print data to Serial Monitor on Arduino IDE
26  Serial.print("x = ");
27  Serial.print(xValue);
28  Serial.print(", y = ");
29  Serial.println(yValue);
30  delay(200);
31}

1/*
2 * This Arduino Giga R1 WiFi code was developed by newbiely.com
3 *
4 * This Arduino Giga R1 WiFi code is made available for public use without any restriction
5 *
6 * For comprehensive instructions and wiring diagrams, please visit:
7 * https://newbiely.com/tutorials/arduino-giga/arduino-giga-r1-wifi-joystick
8 */
9
10#include <ezButton.h>
11
12#define VRX_PIN  A1 // The Arduino Giga R1 WiFi pin connected to VRX pin
13#define VRY_PIN  A0 // The Arduino Giga R1 WiFi pin connected to VRY pin
14#define SW_PIN   2  // The Arduino Giga R1 WiFi pin connected to SW  pin
15
16ezButton button(SW_PIN);
17
18int xValue = 0; // To store value of the X axis
19int yValue = 0; // To store value of the Y axis
20int bValue = 0; // To store value of the button
21
22void setup() {
23  Serial.begin(9600) ;
24  button.setDebounceTime(50); // set debounce time to 50 milliseconds
25}
26
27void loop() {
28  button.loop(); // MUST call the loop() function first
29
30  // read analog X and Y analog values
31  xValue = analogRead(VRX_PIN);
32  yValue = analogRead(VRY_PIN);
33
34  // Read the button value
35  bValue = button.getState();
36
37  if (button.isPressed()) {
38    Serial.println("The button is pressed");
39    // TODO do something here
40  }
41
42  if (button.isReleased()) {
43    Serial.println("The button is released");
44    // TODO do something here
45  }
46
47  // print data to Serial Monitor on Arduino IDE
48  Serial.print("x = ");
49  Serial.print(xValue);
50  Serial.print(", y = ");
51  Serial.print(yValue);
52  Serial.print(" : button = ");
53  Serial.println(bValue);
54}