Chat with ChatGPT through Arduino IoT Cloud

Arduino IoT Cloud Remote

Arduino IoT Cloud

Arduino Nano RP2040 Connect

<html><body><h3>Overview</h3>The project involves using an Arduino IoT Cloud compatible device, such as an Arduino Nano RP2040 Connect or any ESP32/ESP8266 device, as a middleware between the IoT Cloud and OpenAI's GPT-3.5 language model. The device receives prompts (questions) from the IoT Cloud, sends them to the OpenAI API, receives and parses the replies, and sends them back to the IoT Cloud. To get started, you need to create an OpenAI account, create an API key, and have enough credits. Then, you can create your device on the IoT Cloud, program it, and set up the dashboard on the IoT Cloud. The dashboard allows you to write questions (prompts) and receive ChatGPT's replies. In testing, there are two ways to interact with ChatGPT that can be used indistinctly: through the chat window or the question, response, send question mechanism. If an error is received, the error code and a description are provided. The project offers some final considerations, such as variable tweaking, defining the maximum number of tokens that ChatGPT will use in generating a response, and keeping in mind the limits on OpenAI API usage. <h3>Pre-requisites</h3>Before getting started you need <ol><li>to have an OpenAI account </li><li>to create an API key </li><li>to have enough credits </li></ol>Create an OpenAI account To create an OpenAI account, you have to go to <a href="https://platform.openai.com/">https://platform.openai.com/ </a>and follow the steps. Create an API key An API key is a necessary step to use the API. Go to the following URL <a href="https://platform.openai.com/account/api-keys">https://platform.openai.com/account/api-keys </a>, click on "Create new Secret key" and follow the instructions. Note down the key, as it will not be possible to see it afterwards. Check the number of credits You can check your usage here: <a href="https://platform.openai.com/account/usage">https://platform.openai.com/account/usage </a>You will see a breakdown list of the number of tokens you have used. <h3>The setup</h3>The setup is really simple. You just need an Arduino IoT Cloud compatible device such as an Arduino Nano RP2040 Connect, an Arduino MKR WiFi 1010 or any ESP32/ESP8266 device. This device will be configured as an Arduino IoT Cloud device and the attached sketch will be running on it. It will act as a middleware between the Arduino IoT Cloud and ChatGPT. It will receive the prompts (questions) from the IoT Cloud, send them to OpenAI API, receive and parse the replies and send them back to the IoT Cloud. Note: From now on, we will assume we are using a Nano RP2040 Connect device, although any other IoT Cloud compatible device could be used On the IoT Cloud we will have a dashboard that we will use to write the questions (prompts) and receive ChatGPT's replies. You can use your mobile phone and the IoT Remote app compatible with both Android ( <a href="https://play.google.com/store/apps/details?id=cc.arduino.cloudiot">https://play.google.com/store/apps/details?id=cc.arduino.cloudiot </a>) and iOS ( <a href="https://apps.apple.com/us/app/arduino-iot-cloud-remote/id1514358431">https://apps.apple.com/us/app/arduino-iot-cloud-remote/id1514358431 </a>). <h3>The process</h3>This process is really simple 1. Get an OpenAPI key (check Pre-requisistes) 2. Create your device on the IoT Cloud and program it 3. Set up the dashboard on the IoT Cloud 4. Testing <h3>Create your device on the IoT Cloud and program it</h3>The Nano RP2040 Connect is the device where the software will run. You just need to follow the following steps: 1. Create the Device Connect the Nano RP2040 Connect board to your PC using the USB cable. Go to the [Devices]( <a href="https://create.arduino.cc/iot/devices">https://create.arduino.cc/iot/devices </a>) section of the Arduino IoT Cloud and click on ADD. Just follow the instructions on the wizard and your device will be detected, configured to be used by the Arduino Cloud and added to the list of devices. 2. Create the Thing Go to the [Things]( <a href="https://create.arduino.cc/iot/things">https://create.arduino.cc/iot/things </a>) section of the Arduino IoT Cloud and click on CREATE. Give it a name and your device will be created. 3. Create the Variables Add the variables clicking on the ADD button. At the end of the process, your list of variables should look like this <figure><img src="https://projects.arduinocontent.cc/a378365b-3b4f-4199-95df-135c70343cce.png"/><figcaption>ChatGPT Thing variables</figcaption></figure>4. Associate the Thing with your Device Go to the Associated Device section and click on “Select Device”. Choose your Nano RP2040 Connect from the list. 5. Configure the network Go to the Network section and click on “Change”. Set the credentials of your WIFI access point. 6. Edit the sketch Paste the sketch on the “Sketch” subsection of the Thing section. You can find the sketch on the Code section at the end of the project. 7. Add your API Key There are two ways to include you OpenAI API key. You can choose the one which is more convenient for you. a) Modify directly the <code class="code">accessToken </code>variable on the sketch replacing <code class="code">SECRET_OPENAI_API_TOKEN </code>with your API key. b) Open the full web editor and go to the "Secret" tab. Introduce the API key in the box identified as <code class="code">SECRET_OPENAI_API_TOKEN </code>8. Program the device Build the sketch and program the device as usual. Note: After the first programming, your device can be updated over-the-air (OTA) <h3>Create a dashboard</h3>Go to the Dashboards section and click on CREATE. Assign a name and start adding the widgets according to the following table: |Widget type |Widget name |Variable name | |---|---|---| |Messenger|Chat window|message| |Value|Question|text| |Value|Response|response| |Push Button|Send Question|send_message| The final result can be something like this: <figure><img src="https://projects.arduinocontent.cc/241dbbb3-9578-47a6-9683-55ab577d9ae0.png"/><figcaption>ChatGPT Dashboard</figcaption></figure><h3>Let's test the system</h3>The first important thing is that we have implemented two ways to interact with ChatGPT that can be used indistinctly: 1. The Chat Window Write a question on the box and wait for the answer. It will take a couple of seconds and will give you a parsed answer. That's it. 2. The Question, Response, Send Question mechanism Write a question on the Question box, push the "Send Question" button and wait for the answer. It will take a couple of seconds and will give you a parsed answer. That's it. In both cases, if an error is received, you will get the error code and a description. In order to chat, you can access your dashboard using either your browser or the IoT Remote mobile app. <figure><img src="https://projects.arduinocontent.cc/e29b716f-a104-4f7e-a3be-9e33aa3303d6.png"/><figcaption>Chatting with ChatGPT using your mobile phone and the IoT Remote app</figcaption></figure><h3>Final considerations</h3>Variable tweaking In the sketch, the following variables can be tweaked: <ol><li><code class="code">maxTokens </code>: Define the maximum number of tokens (characters) that ChatGPT will use in its response </li><li><code class="code">apiEndpoint </code>: OpenAI has many different endpoints. You can investigate and play with them </li><li><code class="code">OpenAImodel </code>: You can use a different language model. Check the full list [here]( <a href="https://platform.openai.com/account/rate-limits">https://platform.openai.com/account/rate-limits </a>). </li></ol>Remember that OpenAI tokens are not free. So remember to limit the maximum number of tokens with the <code class="code">maxTokens </code>variable so that your billing doesn't grow without control. Bear that also in mind when you ask your questions. LED Blink The sketch makes the builtin LED blink every 2 seconds. This way, we know that the board is alive. It uses the ArduinoThread library that you can find[here](https://github.com/ivanseidel/ArduinoThread). If you want to disable the blink, you just have to comment out the line `#define USE_THREAD 1` Import the Thing and Dashboard with the Arduino Cloud CLI In the github project, you can find the YAML files describing the Thing and Dashboard: <a href="https://github.com/d-beamon/chatgpt-arduino-cloud/tree/master/IoT-Cloud">https://github.com/d-beamon/chatgpt-arduino-cloud/tree/master/IoT-Cloud </a>You can use the following tutorial to create your Thing and Dashboard using the Arduino Cloud CLI easily and those templates. <ol><li>[Create a Thing with Cloud CLI]( <a href="https://docs.arduino.cc/arduino-cloud/getting-started/arduino-cloud-cli#create-things">https://docs.arduino.cc/arduino-cloud/getting-started/arduino-cloud-cli#create-things </a>) </li><li>[Create a Dashboard with Cloud CLI]( <a href="https://docs.arduino.cc/arduino-cloud/getting-started/arduino-cloud-cli#create-dashboard">https://docs.arduino.cc/arduino-cloud/getting-started/arduino-cloud-cli#create-dashboard </a>) </li></ol><h3>Future use cases and expansions</h3>There are many follow-up projects to this one. These are the ones that I have in mind: <ol><li>Chat with ChatGPT with your voice using a NanoRP2040 Connect. The idea is to use the mic of the board, process the speech, send it to OpenAI, wait for the reply and show the answer. We can use a display, a widget on the dashboard or use a TTS synth with a speaker. </li><li>Use natural language to perform daily actions using a NanoRP2040 Connect board. Use ChatGPT as a parser of natural language receiving the list of actions in an actionable way </li></ol> </body></html>

Chat with ChatGPT through Arduino IoT Cloud

Are you passionate about ChatGPT and Arduino? In this project you will learn how to chat with ChatGPT using any Arduino board and Arduino IoT Cloud dashboards.