Raspberry Pi Zero mechanic switches shield

Raspberry Pi Zero

Through Hole Resistor, 10 ohm

Solder Wire, Lead Free

PCBWay Custom PCB

Soldering iron (generic)

Mechanical Switches

Pins

<h3 ><span >Building the Shield:</span></h3><h3 ><span >Materials:</span></h3><p >4x 10 Ohm Resistors.</p><p >4x Mechanical keyboard switches.</p><p >1x Raspberry Pi Zero</p><p >40x Generic pins. (Skip this part if your board has pins)</p><h3 ><span >Steps:</span></h3><p >1- Solder the resistors to the resistor sockets located on the sides of the shield</p><p >2- Solder the Switches to the sockets</p><p >3- Program the board.</p><p >If you would like to download the Gerber or order the board, feel free to check out the project on pcbway:</p><p ><a href="https://www.pcbway.com/project/shareproject/Raspberry_Pi_Zero_mechanic_switches_shield_8d7db2b5.html">https://www.pcbway.com/project/shareproject/Raspberry_Pi_Zero_mechanic_switches_shield_8d7db2b5.html</a></p>

Raspberry Pi Zero mechanic switches shield

Make a simple shield with buttons for hardware projects!