3D Printed Christmas Tree with Animation

1/*
2  Blink
3  Turns on an LED on for one second, then off for one  second, repeatedly.
4
5  Most Arduinos have an on-board LED you can control.  On the Uno and
6  Leonardo, it is attached to digital pin 13. If you're unsure  what
7  pin the on-board LED is connected to on your Arduino model, check
8  the documentation at http://www.arduino.cc
9
10  This example code is in the  public domain.
11
12  modified 8 May 2014
13  by Scott Fitzgerald
14 */
15
16
17//  the setup function runs once when you press reset or power the board
18void setup()  {
19  // initialize digital pin 13 as an output.
20  pinMode(1, OUTPUT);
21  pinMode(2,  OUTPUT);
22  pinMode(3, OUTPUT);
23  pinMode(4, OUTPUT);
24  pinMode(5, OUTPUT);
25  pinMode(6, OUTPUT);
26  pinMode(7, OUTPUT);
27  pinMode(8, OUTPUT);
28  pinMode(9,  OUTPUT);
29  pinMode(10, OUTPUT);
30  pinMode(11, OUTPUT);
31  pinMode(12, OUTPUT);
32  pinMode(13, OUTPUT);
33  
34}
35
36// the loop function runs over and over  again forever
37void loop() {
38
39
40  for(int i=0;i<14;i++)
41  {
42  digitalWrite(i,  HIGH);   
43  delay(200);             
44              
45}
46
47
48  for(int  i=0;i<14;i++)
49  {
50  digitalWrite(i, LOW);   
51  delay(200);             
52              
53}
54for(int x=0; x<5;x++)
55{
56 for(int k=0;k<7;k++)
57  {
58  digitalWrite(k, HIGH);   
59              
60              
61}
62delay(100);
63  for(int k=7;k<14;k++)
64  {
65  digitalWrite(k, HIGH);   
66              
67              
68}
69delay(100);
70}
71}
72
73
74

1/*
2  Blink
3  Turns on an LED on for one second, then off for one
4  second, repeatedly.
5
6  Most Arduinos have an on-board LED you can control.
7  On the Uno and
8  Leonardo, it is attached to digital pin 13. If you're unsure
9  what
10  pin the on-board LED is connected to on your Arduino model, check
11
12  the documentation at http://www.arduino.cc
13
14  This example code is in the
15  public domain.
16
17  modified 8 May 2014
18  by Scott Fitzgerald
19 */
20
21
22//
23  the setup function runs once when you press reset or power the board
24void setup()
25  {
26  // initialize digital pin 13 as an output.
27  pinMode(1, OUTPUT);
28  pinMode(2,
29  OUTPUT);
30  pinMode(3, OUTPUT);
31  pinMode(4, OUTPUT);
32  pinMode(5, OUTPUT);
33
34  pinMode(6, OUTPUT);
35  pinMode(7, OUTPUT);
36  pinMode(8, OUTPUT);
37  pinMode(9,
38  OUTPUT);
39  pinMode(10, OUTPUT);
40  pinMode(11, OUTPUT);
41  pinMode(12, OUTPUT);
42
43  pinMode(13, OUTPUT);
44  
45}
46
47// the loop function runs over and over
48  again forever
49void loop() {
50
51
52  for(int i=0;i<14;i++)
53  {
54  digitalWrite(i,
55  HIGH);   
56  delay(200);             
57              
58}
59
60
61  for(int
62  i=0;i<14;i++)
63  {
64  digitalWrite(i, LOW);   
65  delay(200);             
66
67              
68}
69for(int x=0; x<5;x++)
70{
71 for(int k=0;k<7;k++)
72  {
73
74  digitalWrite(k, HIGH);   
75              
76              
77}
78delay(100);
79
80  for(int k=7;k<14;k++)
81  {
82  digitalWrite(k, HIGH);   
83              
84
85              
86}
87delay(100);
88}
89}
90
91
92