Automatic Curtain Using Bluetooth

Jumper wires (generic)

Hot glue gun (generic)

Bluetooth_Con

Arduino UNO

Soldering iron (generic)

DC motor (generic)

Dual H-Bridge motor drivers L298

<h3 >Automatic Curtain</h3>This tutorial will teach you to make an automatic curtain using Bluetooth.<h3 >Components </h3>1) Arduino UNO 2 ) L298N (if using geared or BO motors) or TB6612FNG (geared motors work best with this)3) Motors4) Clamps5) HC-05 6) Jumpers and wire7) Adapter to connect to the Arduino for power/battery8) String<h3 >Step 1: Clamping</h3>Attach the clamps at the ends of your pelmet box. <h3 >Step 2: Connections with L298N and HC-05</h3>On the L298N/TB6612FNG:-in1=3in2=2ena=5in3=9in4=10 enb=6GND-gnd(on arduino and the negative terminal of the battery)5v-Vin((if using battery for the whole setup) )12v- Battery( if using one)On the HC-05:-RX-0TX-1VCC-5v(or 3.3v)Gnd-gnd(on arduino)(Connect stby on TB6612FNG to vcc) <h3 >Step 3: Final</h3>Attach the motors to the clamps and connect the outpins of the L298N/TB6612FNG to the motorsAttach the one string from each motor to one curtain ring/end(other ring/end end should be fixed)And upload the code to the arduino<h3 >Step 4: Connection with Mobile</h3>Click <a href="http://ai2.appinventor.mit.edu/?galleryId=5870715698020352">here</a> to download my app for easy handling.<pre ><code >Please comment if you face any bug </code></pre>

AllOrange

AutoMatic_Curtain.ino

Automatic Curtain Using Bluetooth

Super awesome project for super-lazy mornings.