Shrinking Arduino with ATTINY13 # 01 : Wiring For Programmin

1/*
2   Blink
3   Turns on an LED on for one second, then off for one   second, repeatedly.
4*/
5
6// the setup function runs once when you press   reset or power the board
7
8void setup() {  // initialize digital pin 13 as   an output.
9   pinMode(2, OUTPUT);
10}
11
12// the loop function runs over   and over again forever
13
14void loop() {
15   digitalWrite(2, HIGH); // turn   the LED on (HIGH is the voltage level)
16   delay(1000); // wait for a second
17    digitalWrite(2, LOW); // turn the LED off by making the voltage LOW
18   delay(1000);   // wait for a second
19}

1/*
2   Blink
3   Turns on an LED on for one second, then off for one  second, repeatedly.
4*/
5
6// the setup function runs once when you press  reset or power the board
7
8void setup() {  // initialize digital pin 13 as  an output.
9   pinMode(2, OUTPUT);
10}
11
12// the loop function runs over  and over again forever
13
14void loop() {
15   digitalWrite(2, HIGH); // turn  the LED on (HIGH is the voltage level)
16   delay(1000); // wait for a second
17   digitalWrite(2, LOW); // turn the LED off by making the voltage LOW
18   delay(1000);  // wait for a second
19}