Temperature monitoring sysetm

1inary file (no preview

1#include <dht.h>
2
3dht DHT1;
4dht DHT2;
5
6#define DHT22_1_PIN  2
7#define DHT22_2_PIN 3
8
9
10void setup() {                
11  // Wait  a few seconds between measurements. The DHT22 should not be read at a higher frequency  of
12  // about once every 2 seconds. So we add a 5 second delay to cover this.  you can change the delay frequency at the end of the code list. 
13  Serial.begin(9600);
14  Serial.println("Système en ligne...");
15  Serial.println("Lecture aux 5 secondes");
16}
17
18
19
20
21void  loop() {
22
23
24    DHT1.read22(DHT22_1_PIN);
25    DHT2.read22(DHT22_2_PIN);
26
27  
28 Serial.println("Intérieur"); 
29 Serial.print("  Humidité  ");Serial.print(DHT1.humidity);  Serial.print(" %");
30 Serial.print("  Température  "); Serial.print(DHT1.temperature);Serial.println("  C°");
31
32 Serial.println("Extérieur"); 
33 Serial.print("  Humidité  ");  Serial.print(DHT2.humidity); Serial.print(" %");
34 Serial.print("  Température  "); Serial.print(DHT2.temperature);Serial.println(" C°");
35
36 Serial.println("-----------------");
37  Serial.println(" ");
38
39  delay(5000); //  you can change the delay frequency  here.
40}

1inary file (no preview

1inary file (no preview

1#include <dht.h>
2
3dht DHT1;
4dht DHT2;
5
6#define DHT22_1_PIN
7  2
8#define DHT22_2_PIN 3
9
10
11void setup() {                
12  // Wait
13  a few seconds between measurements. The DHT22 should not be read at a higher frequency
14  of
15  // about once every 2 seconds. So we add a 5 second delay to cover this.
16  you can change the delay frequency at the end of the code list. 
17  Serial.begin(9600);
18
19  Serial.println("Système en ligne...");
20  Serial.println("Lecture aux 5 secondes");
21}
22
23
24
25
26void
27  loop() {
28
29
30    DHT1.read22(DHT22_1_PIN);
31    DHT2.read22(DHT22_2_PIN);
32
33
34  
35 Serial.println("Intérieur"); 
36 Serial.print("  Humidité  ");Serial.print(DHT1.humidity);
37  Serial.print(" %");
38 Serial.print("  Température  "); Serial.print(DHT1.temperature);Serial.println("
39  C°");
40
41 Serial.println("Extérieur"); 
42 Serial.print("  Humidité  ");
43  Serial.print(DHT2.humidity); Serial.print(" %");
44 Serial.print("  Température
45  "); Serial.print(DHT2.temperature);Serial.println(" C°");
46
47 Serial.println("-----------------");
48
49  Serial.println(" ");
50
51  delay(5000); //  you can change the delay frequency
52  here.
53}