Smart Car Parking System

fritzing

5 mm LED: Red

Arduino Mega 2560 Rev3

SG90 Micro-servo motor

4xAA battery holder

Arduino IDE

Rotary potentiometer (generic)

5mm LED blue

Toggle Switch, Toggle

DS3231MPMB1 Peripheral Module

5 mm LED: Green

IR distance-sensor

High Brightness LED, White

<p >This is a homemade high school project of a fully-functional architectural model of a smart parking system/lot.</p><p >Contains fully automatic barriers, LED indication of parking lot occupance (RED-occupied, GREEN-free), LCD display at the entrance. Parking lot sensors are pointing straight down from the roof.</p><figure><img src=https://projects.arduinocontent.cc/f7a28b67-4dbf-4f2b-8b66-2580dbcf07b2.jpg /><figcaption> </figcaption></figure><figure><img src=https://projects.arduinocontent.cc/8182c9ed-1e0c-41e6-a44a-a6ec29e47ed3.jpg /><figcaption> </figcaption></figure><figure><img src=https://projects.arduinocontent.cc/b4921853-3900-4a8e-98d8-c95b7efdc4e9.jpg /><figcaption> </figcaption></figure><figure><img src=https://projects.arduinocontent.cc/35c30201-7957-4308-8fe7-c5924ef10467.jpg /><figcaption> </figcaption></figure><p >Stuff painted dark-gray is steel, everything else is wooden.</p><p >Project contains approx. 30 metres of wire.</p><p >Total current draw is 220mA (a lot less than theoretical expectation), without servos - those are supplied by 4x1, 5V batteries.</p><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/6uT9-1X50Zw" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><p ><br ></br></p>

code.ino

parking

Smart Car Parking System

A 63x53cm homemade smart parking lot.