Clap Controlled DC Motor

1/*For this project you will have to connect external power supply of 9V  or 5V to the 12V pin of driver.*/
2int soundSensor=2; //This is the input pin  connected to digital output of sound sensor
3int LED=4; //This pin is connected  to led for indication and input to motor driver
4int stat = 5; //This pin is used  as input to verify that LED pin is on or off
5void setup() {
6 pinMode(soundSensor,INPUT);
7  pinMode(LED,OUTPUT);
8 pinMode(stat,INPUT);
9}
10
11void loop() {
12 stat  = digitalRead(5);
13  int SensorData=digitalRead(soundSensor); 
14  //Now to turn  on
15  if(SensorData==1) //If the sensor detected any sound
16  {
17     if(stat==false)  //And if Led pin is false or off
18     {
19       
20        digitalWrite(LED,HIGH);//We  will turn onn the input pin for H-Bridge driver and LED
21       
22digitalWrite(8,  LOW);//This is to ensure that our DC motor rotates in one direction
23     }
24    }
25  
26   
27  //Now to turn off
28   if(SensorData==1) //If the sensor  detected any sound
29   {
30
31    if(stat==true) //And if Led pin is true or  on
32    {
33     
34        digitalWrite(LED,LOW); //Now the dc motor won't  work as there is no input to the driver
35       
36    
37   
38    }
39  
40  } 
41}
42