Bluetooth House Control

1[InternetShortcut]
2URL=https:
3
4//create.arduino.cc/projecthub/projects/582f8b/edit
5/*  Control led desde el pin 12, 11, 10 y 4
6    usando aplicacion de bluetooth serial
7    y ligthblue con iphone y el modulo
8    SH-M08 CC2541
9*/
10#include <Arduino.h>
11#include  <Servo.h>
12Servo servo1;    // Crea el servo con la libreria de servo.h
13Servo  servo2;    // Creat a servo whit librery servo.h
14
15int leds[] = {12, 11, 10,  9};
16//char val;
17int val=0;
18
19void setup() {
20  servo1.attach(8);
21  servo2.attach(7);
22  pinMode (9, OUTPUT);
23  pinMode (12, OUTPUT);
24  pinMode  (11, OUTPUT);
25  pinMode (10, OUTPUT);
26  Serial.begin(9600);
27  delay(500);
28}
29
30void  loop() {               // put your main code here, to run repeatedly:
31  
32  if (Serial.available()>0) {
33    val = Serial.read();
34  }
35
36  if (val  == 'q') {           // tell a reley to go  ON
37    digitalWrite(12, HIGH);
38  }
39  if (val == 'w') {          // tell a relay to go OFF
40    digitalWrite(12,  LOW);
41  }
42
43  if (val == 'e') {
44    digitalWrite(11, HIGH);
45  }
46  if (val == 'r') {
47    digitalWrite(11, LOW);
48  }
49
50  if (val == 't')  {
51    digitalWrite(10, HIGH);
52  }
53  if (val == 'y') {
54    digitalWrite(10,  LOW);
55  }
56
57  if (val == 'o') {
58    digitalWrite(9, HIGH);
59  }
60  if (val == 'p') {
61    digitalWrite(9, LOW);
62  }
63
64  if (val == 'd')  {
65    servo1.write(0);      // tell servo to go to position in variable 'pos'
66  }
67  
68  if (val == 'f') {
69    servo1.write(180);    // tell servo to go  to position in variable 'pos'
70   }
71   
72  if (val == 'a') {
73    servo2.write(0);      // tell servo to go to position in variable 'pos'
74  }
75  
76  if (val  == 's') {
77    servo2.write(180);    // tell servo to go to position in variable  'pos'
78   }
79
80 if (val == 'n') {          // All ligth torn ON
81    digitalWrite(9,  HIGH);
82    digitalWrite(10, HIGH);
83    digitalWrite(11, HIGH);
84    digitalWrite(12,  HIGH);
85  }
86  
87if (val == 'm') {          // All ligth torn OFF
88    digitalWrite(9,  LOW);
89    digitalWrite(10, LOW);
90    digitalWrite(11, LOW);
91    digitalWrite(12,  LOW);
92  }
93 
94}  
95
96

1[InternetShortcut]
2URL=https:
3
4//create.arduino.cc/projecthub/projects/582f8b/edit
5/*
6  Control led desde el pin 12, 11, 10 y 4
7    usando aplicacion de bluetooth serial
8
9    y ligthblue con iphone y el modulo
10    SH-M08 CC2541
11*/
12#include <Arduino.h>
13#include
14  <Servo.h>
15Servo servo1;    // Crea el servo con la libreria de servo.h
16Servo
17  servo2;    // Creat a servo whit librery servo.h
18
19int leds[] = {12, 11, 10,
20  9};
21//char val;
22int val=0;
23
24void setup() {
25  servo1.attach(8);
26
27  servo2.attach(7);
28  pinMode (9, OUTPUT);
29  pinMode (12, OUTPUT);
30  pinMode
31  (11, OUTPUT);
32  pinMode (10, OUTPUT);
33  Serial.begin(9600);
34  delay(500);
35}
36
37void
38  loop() {               // put your main code here, to run repeatedly:
39  
40
41  if (Serial.available()>0) {
42    val = Serial.read();
43  }
44
45  if (val
46  == 'q') {           // tell a reley to go  ON
47    digitalWrite(12, HIGH);
48
49  }
50  if (val == 'w') {          // tell a relay to go OFF
51    digitalWrite(12,
52  LOW);
53  }
54
55  if (val == 'e') {
56    digitalWrite(11, HIGH);
57  }
58
59  if (val == 'r') {
60    digitalWrite(11, LOW);
61  }
62
63  if (val == 't')
64  {
65    digitalWrite(10, HIGH);
66  }
67  if (val == 'y') {
68    digitalWrite(10,
69  LOW);
70  }
71
72  if (val == 'o') {
73    digitalWrite(9, HIGH);
74  }
75
76  if (val == 'p') {
77    digitalWrite(9, LOW);
78  }
79
80  if (val == 'd')
81  {
82    servo1.write(0);      // tell servo to go to position in variable 'pos'
83
84  }
85  
86  if (val == 'f') {
87    servo1.write(180);    // tell servo to go
88  to position in variable 'pos'
89   }
90   
91  if (val == 'a') {
92    servo2.write(0);
93      // tell servo to go to position in variable 'pos'
94  }
95  
96  if (val
97  == 's') {
98    servo2.write(180);    // tell servo to go to position in variable
99  'pos'
100   }
101
102 if (val == 'n') {          // All ligth torn ON
103    digitalWrite(9,
104  HIGH);
105    digitalWrite(10, HIGH);
106    digitalWrite(11, HIGH);
107    digitalWrite(12,
108  HIGH);
109  }
110  
111if (val == 'm') {          // All ligth torn OFF
112    digitalWrite(9,
113  LOW);
114    digitalWrite(10, LOW);
115    digitalWrite(11, LOW);
116    digitalWrite(12,
117  LOW);
118  }
119 
120}  
121
122