YouTube Subs, Views & Videos Counter

1///
2/// \\file LiquidCrystal_PCF8574.h
3/// \\brief LiquidCrystal  library with PCF8574 I2C adapter.
4///
5/// \\author Matthias Hertel, http://www.mathertel.de
6///  \\copyright Copyright (c) 2014 by Matthias Hertel.\
7
8/// This work is licensed  under a BSD style license.\
9
10/// See http://www.mathertel.de/License.aspx
11///  
12/// Copyright (c) 2005-2012 by Matthias Hertel, http://www.mathertel.de/
13///  All rights reserved.
14///
15/// * Redistribution and use in source and binary  forms, with or without modification, are permitted provided that the following conditions  are met:
16/// * Redistributions of source code must retain the above copyright  notice, this list of conditions and the following disclaimer.
17/// * Redistributions  in binary form must reproduce the above copyright notice, this list of conditions  and the following disclaimer in the 
18///   documentation and/or other materials  provided with the distribution. Neither the name of the copyright owners nor the  names of its 
19///   contributors may be used to endorse or promote products derived  from this software without specific prior written permission.
20///
21/// THIS  SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY  EXPRESS OR IMPLIED WARRANTIES, 
22/// INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  
23/// IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
24/// EXEMPLARY, OR CONSEQUENTIAL DAMAGES  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS  OF USE, DATA, OR PROFITS; 
25/// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
26///  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27
28
29/// \\details
30///  This is a library for driving LiquidCrystal displays (LCD) by using the I2C bus  and an PCF8574 I2C adapter.
31/// This library is derived from the original Arduino  LiquidCrystal library and uses the original Wire library for communication.
32///
33///  ChangeLog:
34/// --------
35/// * 19.10.2013 created.
36/// * 24.05.2015 Arduino  Library Manager compatible.
37/// * 20.12.2016 circuito.io:
38///                 *  Added scrolling multiple chars to scrolling functions
39///                 * Added  selectLine function, same as setCursor(0, line - 1)
40///                 * Added  checkI2CConnection - prints to the serial monitor if connection faild. it is called  inside begin.
41
42
43
44#ifndef LiquidCrystal_PCF8574_h
45#define LiquidCrystal_PCF8574_h
46
47#include  <inttypes.h>
48#include "Print.h"
49
50// commands
51#define LCD_CLEARDISPLAY  0x01
52#define LCD_RETURNHOME 0x02
53#define LCD_ENTRYMODESET 0x04
54#define  LCD_DISPLAYCONTROL 0x08
55#define LCD_CURSORSHIFT 0x10
56#define LCD_FUNCTIONSET  0x20
57#define LCD_SETCGRAMADDR 0x40
58#define LCD_SETDDRAMADDR 0x80
59
60//  flags for display entry mode
61#define LCD_ENTRYRIGHT 0x00
62#define LCD_ENTRYLEFT  0x02
63#define LCD_ENTRYSHIFTINCREMENT 0x01
64#define LCD_ENTRYSHIFTDECREMENT  0x00
65
66// flags for display on/off control
67#define LCD_DISPLAYON 0x04
68#define  LCD_DISPLAYOFF 0x00
69#define LCD_CURSORON 0x02
70#define LCD_CURSOROFF 0x00
71#define  LCD_BLINKON 0x01
72#define LCD_BLINKOFF 0x00
73
74// flags for display/cursor  shift
75#define LCD_DISPLAYMOVE 0x08
76#define LCD_CURSORMOVE 0x00
77#define  LCD_MOVERIGHT 0x04
78#define LCD_MOVELEFT 0x00
79
80// flags for function set
81#define  LCD_8BITMODE 0x10
82#define LCD_4BITMODE 0x00
83#define LCD_2LINE 0x08
84#define  LCD_1LINE 0x00
85#define LCD_5x10DOTS 0x04
86#define LCD_5x8DOTS 0x00
87
88class  LiquidCrystal_PCF8574 : public Print {
89public:
90
91  LiquidCrystal_PCF8574();
92  LiquidCrystal_PCF8574(uint8_t addr);
93
94  void begin(uint8_t cols, uint8_t  rows, uint8_t charsize = LCD_5x8DOTS);
95  void begin(uint8_t cols, uint8_t lines,  uint8_t addr, uint8_t backlight);
96  bool checkI2CConnection();
97
98  void  clear();
99  void home();
100  
101  void noDisplay();
102  void display();
103  void noBlink();
104  void blink();
105  void noCursor();
106  void cursor();
107  void scrollDisplayLeft(int charsToScroll, int scrollSpeed);
108  void scrollDisplayRight(int  charsToScroll, int scrollSpeed);
109  void leftToRight();
110  void rightToLeft();
111  void autoscroll();
112  void noAutoscroll();
113
114  void setBacklight(uint8_t  brightness);
115  
116  void createChar(uint8_t, uint8_t[]);
117  void setCursor(uint8_t  col, uint8_t row);
118  void selectLine(uint8_t line);
119
120  virtual size_t write(uint8_t);
121  using Print::write;
122
123private:
124  // low level functions
125  void _command(uint8_t);
126  void _send(uint8_t value, uint8_t mode);
127  void _sendNibble(uint8_t halfByte,  uint8_t mode);
128  void _write2Wire(uint8_t halfByte, uint8_t mode, uint8_t enable);
129
130//  NEW:
131  uint8_t _Addr;        ///< Wire Address of the LCD
132  uint8_t _backlight;   ///< the backlight intensity 
133
134  uint8_t _displayfunction; ///< lines and  dots mode
135  uint8_t _displaycontrol;  ///< cursor, display, blink flags
136  uint8_t  _displaymode;     ///< left2right, autoscroll
137
138  uint8_t _numlines;        ///<  The number of rows the display supports.
139};
140
141#endif
142

1///
2/// \\file LiquidCrystal_PCF8574.h
3/// \\brief LiquidCrystal
4  library with PCF8574 I2C adapter.
5///
6/// \\author Matthias Hertel, http://www.mathertel.de
7///
8  \\copyright Copyright (c) 2014 by Matthias Hertel.\
9
10/// This work is licensed
11  under a BSD style license.\
12
13/// See http://www.mathertel.de/License.aspx
14///
15  
16/// Copyright (c) 2005-2012 by Matthias Hertel, http://www.mathertel.de/
17///
18  All rights reserved.
19///
20/// * Redistribution and use in source and binary
21  forms, with or without modification, are permitted provided that the following conditions
22  are met:
23/// * Redistributions of source code must retain the above copyright
24  notice, this list of conditions and the following disclaimer.
25/// * Redistributions
26  in binary form must reproduce the above copyright notice, this list of conditions
27  and the following disclaimer in the 
28///   documentation and/or other materials
29  provided with the distribution. Neither the name of the copyright owners nor the
30  names of its 
31///   contributors may be used to endorse or promote products derived
32  from this software without specific prior written permission.
33///
34/// THIS
35  SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
36  EXPRESS OR IMPLIED WARRANTIES, 
37/// INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
38  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
39  
40/// IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
41  DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
42/// EXEMPLARY, OR CONSEQUENTIAL DAMAGES
43  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
44  OF USE, DATA, OR PROFITS; 
45/// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
46  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
47///
48  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
49  EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
50
51
52/// \\details
53///
54  This is a library for driving LiquidCrystal displays (LCD) by using the I2C bus
55  and an PCF8574 I2C adapter.
56/// This library is derived from the original Arduino
57  LiquidCrystal library and uses the original Wire library for communication.
58///
59///
60  ChangeLog:
61/// --------
62/// * 19.10.2013 created.
63/// * 24.05.2015 Arduino
64  Library Manager compatible.
65/// * 20.12.2016 circuito.io:
66///                 *
67  Added scrolling multiple chars to scrolling functions
68///                 * Added
69  selectLine function, same as setCursor(0, line - 1)
70///                 * Added
71  checkI2CConnection - prints to the serial monitor if connection faild. it is called
72  inside begin.
73
74
75
76#ifndef LiquidCrystal_PCF8574_h
77#define LiquidCrystal_PCF8574_h
78
79#include
80  <inttypes.h>
81#include "Print.h"
82
83// commands
84#define LCD_CLEARDISPLAY
85  0x01
86#define LCD_RETURNHOME 0x02
87#define LCD_ENTRYMODESET 0x04
88#define
89  LCD_DISPLAYCONTROL 0x08
90#define LCD_CURSORSHIFT 0x10
91#define LCD_FUNCTIONSET
92  0x20
93#define LCD_SETCGRAMADDR 0x40
94#define LCD_SETDDRAMADDR 0x80
95
96//
97  flags for display entry mode
98#define LCD_ENTRYRIGHT 0x00
99#define LCD_ENTRYLEFT
100  0x02
101#define LCD_ENTRYSHIFTINCREMENT 0x01
102#define LCD_ENTRYSHIFTDECREMENT
103  0x00
104
105// flags for display on/off control
106#define LCD_DISPLAYON 0x04
107#define
108  LCD_DISPLAYOFF 0x00
109#define LCD_CURSORON 0x02
110#define LCD_CURSOROFF 0x00
111#define
112  LCD_BLINKON 0x01
113#define LCD_BLINKOFF 0x00
114
115// flags for display/cursor
116  shift
117#define LCD_DISPLAYMOVE 0x08
118#define LCD_CURSORMOVE 0x00
119#define
120  LCD_MOVERIGHT 0x04
121#define LCD_MOVELEFT 0x00
122
123// flags for function set
124#define
125  LCD_8BITMODE 0x10
126#define LCD_4BITMODE 0x00
127#define LCD_2LINE 0x08
128#define
129  LCD_1LINE 0x00
130#define LCD_5x10DOTS 0x04
131#define LCD_5x8DOTS 0x00
132
133class
134  LiquidCrystal_PCF8574 : public Print {
135public:
136
137  LiquidCrystal_PCF8574();
138
139  LiquidCrystal_PCF8574(uint8_t addr);
140
141  void begin(uint8_t cols, uint8_t
142  rows, uint8_t charsize = LCD_5x8DOTS);
143  void begin(uint8_t cols, uint8_t lines,
144  uint8_t addr, uint8_t backlight);
145  bool checkI2CConnection();
146
147  void
148  clear();
149  void home();
150  
151  void noDisplay();
152  void display();
153
154  void noBlink();
155  void blink();
156  void noCursor();
157  void cursor();
158
159  void scrollDisplayLeft(int charsToScroll, int scrollSpeed);
160  void scrollDisplayRight(int
161  charsToScroll, int scrollSpeed);
162  void leftToRight();
163  void rightToLeft();
164
165  void autoscroll();
166  void noAutoscroll();
167
168  void setBacklight(uint8_t
169  brightness);
170  
171  void createChar(uint8_t, uint8_t[]);
172  void setCursor(uint8_t
173  col, uint8_t row);
174  void selectLine(uint8_t line);
175
176  virtual size_t write(uint8_t);
177
178  using Print::write;
179
180private:
181  // low level functions
182  void _command(uint8_t);
183
184  void _send(uint8_t value, uint8_t mode);
185  void _sendNibble(uint8_t halfByte,
186  uint8_t mode);
187  void _write2Wire(uint8_t halfByte, uint8_t mode, uint8_t enable);
188
189//
190  NEW:
191  uint8_t _Addr;        ///< Wire Address of the LCD
192  uint8_t _backlight;
193   ///< the backlight intensity 
194
195  uint8_t _displayfunction; ///< lines and
196  dots mode
197  uint8_t _displaycontrol;  ///< cursor, display, blink flags
198  uint8_t
199  _displaymode;     ///< left2right, autoscroll
200
201  uint8_t _numlines;        ///<
202  The number of rows the display supports.
203};
204
205#endif
206

1///
2/// \\file LiquidCrystal_PCF8574.cpp
3/// \\brief LiquidCrystal  (LCD) library with PCF8574 I2C adapter.
4///
5/// \\author Matthias Hertel,  http://www.mathertel.de
6/// \\copyright Copyright (c) 2014 by Matthias Hertel.\
7
8///  This work is licensed under a BSD style license.\
9
10/// See http://www.mathertel.de/License.aspx
11///  
12/// \\details
13/// This is a library for driving LiquidCrystal displays (LCD)  by using the I2C bus and an PCF8574 I2C adapter.
14/// This library is derived  from the original Arduino LiquidCrystal library and uses the original Wire library  for communication.
15///
16/// More documentation and source code is available  at http://www.mathertel.de/Arduino
17///
18/// ChangeLog see: LiquidCrystal_PCF8574.h
19
20#include  "LiquidCrystal_PCF8574.h"
21
22#include <stdio.h>
23#include <string.h>
24#include  <inttypes.h>
25#include "Arduino.h"
26#include <Wire.h>
27
28/// Definitions  on how the PCF8574 is connected to the LCD
29
30/// These are Bit-Masks for the  special signals and background light
31#define PCF_RS  0x01
32#define PCF_RW  0x02
33#define  PCF_EN  0x04
34#define PCF_BACKLIGHT 0x08
35
36// Definitions on how the PCF8574  is connected to the LCD
37// These are Bit-Masks for the special signals and Background
38#define  RSMODE_CMD  0
39#define RSMODE_DATA 1
40
41
42// When the display powers up,  it is configured as follows:
43//
44// 1. Display clear
45// 2. Function set:  
46//    DL = 1; 8-bit interface data 
47//    N = 0; 1-line display 
48//    F  = 0; 5x8 dot character font 
49// 3. Display on/off control: 
50//    D = 0; Display  off 
51//    C = 0; Cursor off 
52//    B = 0; Blinking off 
53// 4. Entry mode  set: 
54//    I/D = 1; Increment by 1 
55//    S = 0; No shift 
56//
57// Note,  however, that resetting the Arduino doesn't reset the LCD, so we
58// can't assume  that its in that state when a sketch starts (and the
59// LiquidCrystal constructor  is called).
60
61// modification:
62// don't use ports from Arduino, but use  ports from Wire
63
64// a nibble is a half Byte
65
66// NEW: http://playground.arduino.cc//Code/LCDAPI
67//  NEW: setBacklight
68
69LiquidCrystal_PCF8574::LiquidCrystal_PCF8574()
70{
71  //_backlight = 255;
72} // LiquidCrystal_PCF8574
73
74LiquidCrystal_PCF8574::LiquidCrystal_PCF8574(uint8_t  addr)
75{
76  _Addr = addr;
77  _backlight = 0;
78} // LiquidCrystal_PCF8574
79
80void  LiquidCrystal_PCF8574::begin(uint8_t cols, uint8_t lines, uint8_t addr, uint8_t  backlight)
81{
82  _backlight = backlight;
83  _Addr = addr;
84  begin(cols,  lines);
85}
86
87void LiquidCrystal_PCF8574::begin(uint8_t cols, uint8_t lines,  uint8_t dotsize) {
88  // cols ignored !
89  _numlines = lines;
90
91  _displayfunction  = 0;
92
93  if (lines > 1) {
94    _displayfunction |= LCD_2LINE;
95  }
96
97  // for some 1 line displays you can select a 10 pixel high font
98  if ((dotsize  != 0) && (lines == 1)) {
99    _displayfunction |= LCD_5x10DOTS;
100  }
101
102  // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
103  // according to datasheet,  we need at least 40ms after power rises above 2.7V
104  // before sending commands.  Arduino can turn on way befor 4.5V so we'll wait 50
105  Wire.begin();
106
107  //  initializing th display
108  _write2Wire(0x00, LOW, false);
109  delayMicroseconds(50000);  
110
111  // put the LCD into 4 bit mode according to the hitachi HD44780 datasheet  figure 26, pg 47
112  _sendNibble(0x03, RSMODE_CMD);
113  delayMicroseconds(4500);  
114  _sendNibble(0x03, RSMODE_CMD);
115  delayMicroseconds(4500); 
116  _sendNibble(0x03,  RSMODE_CMD);
117  delayMicroseconds(150);
118  // finally, set to 4-bit interface
119  _sendNibble(0x02, RSMODE_CMD);
120
121  // finally, set # lines, font size, etc.
122  _command(LCD_FUNCTIONSET | _displayfunction);  
123
124  // turn the display on  with no cursor or blinking default
125  _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF  | LCD_BLINKOFF;  
126  display();
127
128  // clear it off
129  clear();
130
131  // Initialize to default text direction (for romance languages)
132  _displaymode  = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
133  // set the entry mode
134  _command(LCD_ENTRYMODESET  | _displaymode);
135
136  setBacklight(_backlight);
137  checkI2CConnection();
138}
139
140/**********  high level commands, for the user! */
141void LiquidCrystal_PCF8574::clear()
142{
143  _command(LCD_CLEARDISPLAY);  // clear display, set cursor position to zero
144  delayMicroseconds(2000);  // this command takes a long time!
145}
146
147void  LiquidCrystal_PCF8574::home()
148{
149  _command(LCD_RETURNHOME);  // set cursor  position to zero
150  delayMicroseconds(2000);  // this command takes a long time!
151}
152
153
154///  Set the cursor to a new position. 
155void LiquidCrystal_PCF8574::setCursor(uint8_t  col, uint8_t row)
156{
157  int row_offsets[] = { 0x00, 0x40, 0x14, 0x54   };
158  if ( row >= _numlines ) {
159    row = _numlines-1;    // we count rows starting  w/0
160  }
161
162  _command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
163}
164
165/**  select begining of line
166 *  line - 1 for first row, 2 for second row
167 *  
168  */
169void LiquidCrystal_PCF8574::selectLine(uint8_t line)
170{
171  setCursor(0,  line - 1);
172}
173
174// Turn the display on/off (quickly)
175void LiquidCrystal_PCF8574::noDisplay()  {
176  _displaycontrol &= ~LCD_DISPLAYON;
177  _command(LCD_DISPLAYCONTROL | _displaycontrol);
178}
179void  LiquidCrystal_PCF8574::display() {
180  _displaycontrol |= LCD_DISPLAYON;
181  _command(LCD_DISPLAYCONTROL  | _displaycontrol);
182}
183
184// Turns the underline cursor on/off
185void LiquidCrystal_PCF8574::noCursor()  {
186  _displaycontrol &= ~LCD_CURSORON;
187  _command(LCD_DISPLAYCONTROL | _displaycontrol);
188}
189void  LiquidCrystal_PCF8574::cursor() {
190  _displaycontrol |= LCD_CURSORON;
191  _command(LCD_DISPLAYCONTROL  | _displaycontrol);
192}
193
194// Turn on and off the blinking cursor
195void LiquidCrystal_PCF8574::noBlink()  {
196  _displaycontrol &= ~LCD_BLINKON;
197  _command(LCD_DISPLAYCONTROL | _displaycontrol);
198}
199void  LiquidCrystal_PCF8574::blink() {
200  _displaycontrol |= LCD_BLINKON;
201  _command(LCD_DISPLAYCONTROL  | _displaycontrol);
202}
203
204/** These commands scroll the display without changing  the RAM
205 *  charsToScroll - how many chars to scroll left
206 *  scrollSpeed  - define scrolling speed, im milliseconds.
207 */
208
209void LiquidCrystal_PCF8574::scrollDisplayLeft(int  charsToScroll, int scrollSpeed) {
210  for (int i=0 ; i < charsToScroll ; i++)
211    {
212     _command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
213    delay(scrollSpeed);
214    }
215}
216
217/** These commands scroll the display without changing the RAM
218  *  charsToScroll - how many chars to scroll right
219 *  scrollSpeed - define scrolling  speed, im milliseconds.
220 */
221
222void LiquidCrystal_PCF8574::scrollDisplayRight(int  charsToScroll, int scrollSpeed) {
223  for (int i=0 ; i < charsToScroll ; i++)
224    {
225    _command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
226    delay(scrollSpeed);
227    }
228}
229
230// This is for text that flows Left to Right
231void LiquidCrystal_PCF8574::leftToRight(void)  {
232  _displaymode |= LCD_ENTRYLEFT;
233  _command(LCD_ENTRYMODESET | _displaymode);
234}
235
236//  This is for text that flows Right to Left
237void LiquidCrystal_PCF8574::rightToLeft(void)  {
238  _displaymode &= ~LCD_ENTRYLEFT;
239  _command(LCD_ENTRYMODESET | _displaymode);
240}
241
242//  This will 'right justify' text from the cursor
243void LiquidCrystal_PCF8574::autoscroll(void)  {
244  _displaymode |= LCD_ENTRYSHIFTINCREMENT;
245  _command(LCD_ENTRYMODESET |  _displaymode);
246}
247
248// This will 'left justify' text from the cursor
249void  LiquidCrystal_PCF8574::noAutoscroll(void) {
250  _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
251  _command(LCD_ENTRYMODESET | _displaymode);
252}
253
254
255/// Setting the brightness  of the background display light.
256/// The backlight can be switched on and off.
257///  The current brightness is stored in the private _backlight variable to have it available  for further data transfers.
258void LiquidCrystal_PCF8574::setBacklight(uint8_t  brightness) {
259  _backlight = brightness;
260  // send no data but set the background-pin  right;
261  _write2Wire(0x00, RSMODE_DATA, false);
262} // setBacklight
263
264
265//  Allows us to fill the first 8 CGRAM locations
266// with custom characters
267void  LiquidCrystal_PCF8574::createChar(uint8_t location, uint8_t charmap[]) {
268  location  &= 0x7; // we only have 8 locations 0-7
269  _command(LCD_SETCGRAMADDR | (location  << 3));
270  for (int i=0; i<8; i++) {
271    write(charmap[i]);
272  }
273}
274
275/*  The write function is needed for derivation from the Print class. */
276inline size_t  LiquidCrystal_PCF8574::write(uint8_t value) {
277  _send(value, RSMODE_DATA);
278  return 1; // assume sucess
279}
280
281/* ----- low level functions ----- */
282
283inline  void LiquidCrystal_PCF8574::_command(uint8_t value) {
284  _send(value, RSMODE_CMD);
285}  // _command()
286
287
288// write either command or data
289void LiquidCrystal_PCF8574::_send(uint8_t  value, uint8_t mode) {
290  // separate the 4 value-nibbles
291  uint8_t valueLo  = value    & 0x0F;
292  uint8_t valueHi = value>>4 & 0x0F;
293
294  _sendNibble(valueHi,  mode);
295  _sendNibble(valueLo, mode);
296} // _send()
297
298
299// write a nibble  / halfByte with handshake
300void LiquidCrystal_PCF8574::_sendNibble(uint8_t halfByte,  uint8_t mode) {
301  _write2Wire(halfByte, mode, true);
302  delayMicroseconds(1);    // enable pulse must be >450ns
303  _write2Wire(halfByte, mode, false);
304  delayMicroseconds(37);   // commands need > 37us to settle
305} // _sendNibble
306
307
308//  private function to change the PCF8674 pins to the given value
309void LiquidCrystal_PCF8574::_write2Wire(uint8_t  halfByte, uint8_t mode, uint8_t enable) {
310  // map the given values to the hardware  of the I2C schema
311  uint8_t i2cData = halfByte << 4;
312  if (mode > 0) i2cData  |= PCF_RS;
313  // PCF_RW is never used.
314  if (enable > 0) i2cData |= PCF_EN;
315  if (_backlight > 0) i2cData |= PCF_BACKLIGHT;
316
317  Wire.beginTransmission(_Addr);
318  Wire.write(i2cData);
319  Wire.endTransmission();   
320} // write2Wire
321
322bool  LiquidCrystal_PCF8574::checkI2CConnection()
323{
324  int error;
325  // See http://playground.arduino.cc/Main/I2cScanner
326  Wire.begin();
327  Wire.beginTransmission(_Addr);
328  error = Wire.endTransmission();
329  
330  if (error) 
331  {
332    Serial.println("LCD not found.");
333  }
334  return error;
335  
336}
337
338// The End.
339

1#include "Arduino.h"
2#include "LiquidCrystal_PCF8574.h"
3#include
4  <YoutubeApi.h>
5#include <ESP8266WiFi.h>
6#include <WiFiClientSecure.h>
7#include
8  <ArduinoJson.h> // This Sketch doesn't technically need this, but the library does
9  so it must be installed.
10
11#define LCD_ADDRESS 0x27
12#define LCD_ROWS 2
13#define
14  LCD_COLUMNS 16
15#define SCROLL_DELAY 150
16#define BACKLIGHT 255
17LiquidCrystal_PCF8574
18  LCDi2C;
19
20//------- Replace the following! ------
21char ssid[] = "Your WiFi
22  Name";       // your network SSID (name)
23char password[] = "Your WiFi Password";
24  // your network key
25#define API_KEY "Your Youtube API Key From Google"  //
26  your google apps API Token
27#define CHANNEL_ID "Your/Someone's Channel ID / Channel
28  URL" // makes up the url of channel
29
30
31WiFiClientSecure client;
32YoutubeApi
33  api(API_KEY, client);
34
35unsigned long api_mtbs = 180000; //mean time between
36  api requests
37unsigned long api_lasttime;   //last time api request has been done
38
39long
40  subs = 0;
41
42void setup() {
43
44  Serial.begin(115200);
45
46  LCDi2C.begin(LCD_COLUMNS,
47  LCD_ROWS, LCD_ADDRESS, BACKLIGHT);
48
49  // Set WiFi to station mode and disconnect
50  from an AP if it was Previously
51  // connected
52  WiFi.mode(WIFI_STA);
53
54  WiFi.disconnect();
55  delay(100);
56
57  // Attempt to connect to Wifi network:
58
59  LCDi2C.print("Connecting To...");
60  delay(1000);
61  LCDi2C.clear();
62
63  LCDi2C.print("Your Desired Name");
64  delay(1000);
65  LCDi2C.selectLine(2);
66
67  LCDi2C.print("WiFi Network...");
68  WiFi.begin(ssid, password);
69  while
70  (WiFi.status() != WL_CONNECTED) {
71    LCDi2C.print(".");
72    delay(100);
73
74  }
75  LCDi2C.clear();
76  LCDi2C.print(" WiFi Connected ");
77  delay(2000);
78
79  LCDi2C.clear();
80  LCDi2C.print("IP Address:");
81  LCDi2C.selectLine(2);
82
83  IPAddress ip = WiFi.localIP();
84  LCDi2C.print(ip);
85  delay(2000);
86  LCDi2C.clear();
87
88  LCDi2C.print("Waiting For");
89  delay(500);
90  LCDi2C.selectLine(2);
91
92  LCDi2C.print("Channel Stats...");
93}
94
95void loop() {
96
97  if (millis()
98  - api_lasttime > api_mtbs)  {
99    if (api.getChannelStatistics(CHANNEL_ID))
100
101    {
102      LCDi2C.clear();
103      LCDi2C.print("Subs:");
104      LCDi2C.print(api.channelStats.subscriberCount);
105
106      LCDi2C.print(" Vids:");
107      LCDi2C.print(api.channelStats.videoCount);
108
109      LCDi2C.selectLine(2);
110      LCDi2C.print("Views: ");
111      LCDi2C.print(api.channelStats.viewCount);
112
113    }
114    api_lasttime = millis();
115  }
116}
117

1#include "Arduino.h"
2#include "LiquidCrystal_PCF8574.h"
3#include  <YoutubeApi.h>
4#include <ESP8266WiFi.h>
5#include <WiFiClientSecure.h>
6#include  <ArduinoJson.h> // This Sketch doesn't technically need this, but the library does  so it must be installed.
7
8#define LCD_ADDRESS 0x27
9#define LCD_ROWS 2
10#define  LCD_COLUMNS 16
11#define SCROLL_DELAY 150
12#define BACKLIGHT 255
13LiquidCrystal_PCF8574  LCDi2C;
14
15//------- Replace the following! ------
16char ssid[] = "Your WiFi  Name";       // your network SSID (name)
17char password[] = "Your WiFi Password";  // your network key
18#define API_KEY "Your Youtube API Key From Google"  //  your google apps API Token
19#define CHANNEL_ID "Your/Someone's Channel ID / Channel  URL" // makes up the url of channel
20
21
22WiFiClientSecure client;
23YoutubeApi  api(API_KEY, client);
24
25unsigned long api_mtbs = 180000; //mean time between  api requests
26unsigned long api_lasttime;   //last time api request has been done
27
28long  subs = 0;
29
30void setup() {
31
32  Serial.begin(115200);
33
34  LCDi2C.begin(LCD_COLUMNS,  LCD_ROWS, LCD_ADDRESS, BACKLIGHT);
35
36  // Set WiFi to station mode and disconnect  from an AP if it was Previously
37  // connected
38  WiFi.mode(WIFI_STA);
39  WiFi.disconnect();
40  delay(100);
41
42  // Attempt to connect to Wifi network:
43  LCDi2C.print("Connecting To...");
44  delay(1000);
45  LCDi2C.clear();
46  LCDi2C.print("Your Desired Name");
47  delay(1000);
48  LCDi2C.selectLine(2);
49  LCDi2C.print("WiFi Network...");
50  WiFi.begin(ssid, password);
51  while  (WiFi.status() != WL_CONNECTED) {
52    LCDi2C.print(".");
53    delay(100);
54  }
55  LCDi2C.clear();
56  LCDi2C.print(" WiFi Connected ");
57  delay(2000);
58  LCDi2C.clear();
59  LCDi2C.print("IP Address:");
60  LCDi2C.selectLine(2);
61  IPAddress ip = WiFi.localIP();
62  LCDi2C.print(ip);
63  delay(2000);
64  LCDi2C.clear();
65  LCDi2C.print("Waiting For");
66  delay(500);
67  LCDi2C.selectLine(2);
68  LCDi2C.print("Channel Stats...");
69}
70
71void loop() {
72
73  if (millis()  - api_lasttime > api_mtbs)  {
74    if (api.getChannelStatistics(CHANNEL_ID))
75    {
76      LCDi2C.clear();
77      LCDi2C.print("Subs:");
78      LCDi2C.print(api.channelStats.subscriberCount);
79      LCDi2C.print(" Vids:");
80      LCDi2C.print(api.channelStats.videoCount);
81      LCDi2C.selectLine(2);
82      LCDi2C.print("Views: ");
83      LCDi2C.print(api.channelStats.viewCount);
84    }
85    api_lasttime = millis();
86  }
87}
88