AWS - Arduino Weather Station

1//include sketch libraries
2#include <IRremote.h>
3#include <stdio.h>  //clock library
4#include <string.h> //clock library
5#include <DS1302.h> //clock  library
6#include <dht.h> //dht11 library
7#include <LiquidCrystal_I2C.h> //LCD  library
8#include <Wire.h> //Wire for LCD library
9
10#define lmPin A1  //LM35  attach to A1
11
12LiquidCrystal_I2C lcd(0x27, 16, 2); // set the LCD address to  0x27 for a 16 chars and 2 line display
13dht DHT; //create a variable type of dht
14
15const  int DHT11_PIN = 4; //attach dht11 to pin 4
16const int waterSensor = 0; //set water  sensor variable
17int waterValue = 0; //variable for water sensor
18int mmwaterValue  = 0;
19int sensorPin = A3; // select the input pin for the potentiometer
20int  luce = 0; //variable for the ldr
21int pluce = 0; //variable for the ldr
22float  tem = 0; //variable for the temperature
23long lmVal = 0; //variable for the LM35
24//ir
25const  int irReceiverPin = 3;
26IRrecv irrecv(irReceiverPin);  //Creates a variable of  type IRrecv
27decode_results results;
28
29
30//define clock variable
31uint8_t  RST_PIN   = 5;  //RST pin attach to
32uint8_t SDA_PIN   = 6;  //IO pin attach to
33uint8_t  SCL_PIN = 7;  //clk Pin attach to
34/* Create buffers */
35char buf[50];
36char  day[10];
37
38
39/* Create a DS1302 object */
40DS1302 rtc(RST_PIN, SDA_PIN,  SCL_PIN);//create a variable type of DS1302
41
42void print_time()
43{
44  /*  Get the current time and date from the chip */
45  Time t = rtc.time();
46  /*  Name the day of the week */
47  memset(day, 0, sizeof(day));
48  switch (t.day)
49  {
50    case 1:
51      strcpy(day, "Sun");
52      break;
53    case 2:
54      strcpy(day, "Mon");
55      break;
56    case 3:
57      strcpy(day,  "Tue");
58      break;
59    case 4:
60      strcpy(day, "Wed");
61      break;
62    case 5:
63      strcpy(day, "Thu");
64      break;
65    case 6:
66      strcpy(day,  "Fri");
67      break;
68    case 7:
69      strcpy(day, "Sat");
70      break;
71  }
72  /* Format the time and date and insert into the temporary buffer */
73  snprintf(buf, sizeof(buf), "%s %04d-%02d-%02d %02d:%02d:%02d", day, t.yr, t.mon,  t.date, t.hr, t.min, t.sec);
74  /* Print the formatted string to serial so we  can see the time */
75  Serial.println(buf);
76  lcd.setCursor(2, 0);
77  lcd.print(t.yr);
78  lcd.print("-");
79  lcd.print(t.mon / 10);
80  lcd.print(t.mon % 10);
81  lcd.print("-");
82  lcd.print(t.date / 10);
83  lcd.print(t.date % 10);
84  lcd.print(" ");
85  lcd.print(day);
86  lcd.setCursor(4, 1);
87  lcd.print(t.hr);
88  lcd.print(":");
89  lcd.print(t.min / 10);
90  lcd.print(t.min % 10);
91  lcd.print(":");
92  lcd.print(t.sec / 10);
93  lcd.print(t.sec % 10);
94}
95
96void  setup() {
97  //clock
98  Serial.begin(9600);
99  rtc.write_protect(false);
100  rtc.halt(false);
101  //ir
102  irrecv.enableIRIn();  //enable ir receiver module
103
104  lcd.init();  //initialize the lcd
105  lcd.backlight();  //open the backlight
106  pinMode(sensorPin, INPUT);
107  Time t(2017, 12, 9, 11, 20, 00, 7);//initialize  the time
108  /* Set the time and date on the chip */
109  rtc.time(t);
110}
111
112void  loop() {
113  lcd.setCursor(0, 0);
114  lcd.print("A");
115  delay(50);
116  lcd.setCursor(1,  0);
117  lcd.print("r");
118  delay(50);
119  lcd.setCursor(2, 0);
120  lcd.print("d");
121  delay(50);
122  lcd.setCursor(3, 0);
123  lcd.print("u");
124  delay(50);
125  lcd.setCursor(4, 0);
126  lcd.print("i");
127  delay(50);
128  lcd.setCursor(5,  0);
129  lcd.print("n");
130  delay(50);
131  lcd.setCursor(6, 0);
132  lcd.print("o");
133  delay(50);
134  lcd.setCursor(8, 0);
135  lcd.print("W");
136  delay(50);
137  lcd.setCursor(9, 0);
138  lcd.print("e");
139  delay(50);
140  lcd.setCursor(10,  0);
141  lcd.print("a");
142  delay(50);
143  lcd.setCursor(11, 0);
144  lcd.print("t");
145  delay(50);
146  lcd.setCursor(12, 0);
147  lcd.print("h");
148  delay(50);
149  lcd.setCursor(13, 0);
150  lcd.print("e");
151  delay(50);
152  lcd.setCursor(14,  0);
153  lcd.print("r");
154  delay(50);
155  lcd.setCursor(4, 1);
156  lcd.print("S");
157  delay(50);
158  lcd.setCursor(5, 1);
159  lcd.print("t");
160  delay(50);
161  lcd.setCursor(6, 1);
162  lcd.print("a");
163  delay(50);
164  lcd.setCursor(7,  1);
165  lcd.print("t");
166  delay(50);
167  lcd.setCursor(8, 1);
168  lcd.print("i");
169  delay(50);
170  lcd.setCursor(9, 1);
171  lcd.print("o");
172  delay(50);
173  lcd.setCursor(10, 1);
174  lcd.print("n");
175  delay(50);
176
177if (irrecv.decode(&results))  //if the ir receiver module receiver data
178  {   
179if (results.value == 0xFF6897)  //if "0" is pushed print TIME
180{
181  lcd.clear(); //clear the LCD
182  print_time();
183  delay(10000); //delay 10000ms
184  lcd.clear(); //clear the LCD
185  delay (200);  //wait for a while
186  irrecv.resume();    // Receive the next value
187}
188if  (results.value == 0xFF30CF) //if "1" is pushed print TEMPERATURE and HUMIDITY
189{
190  lcd.clear(); //clear the LCD
191  //READ DATA of the DHT
192  int chk = DHT.read11(DHT11_PIN);
193  // DISPLAY DATA
194  lcd.setCursor(0, 0);
195  lcd.print("Tem:");
196  lmVal  = analogRead(lmPin);//read the value of A1
197  tem = (lmVal * 0.0048828125 * 100);//5/1024=0.0048828125;1000/10=100
198  lcd.print(tem);//print tem
199  lcd.print(char(223));//print the unit"  "
200  lcd.print("C      ");
201  // Serial.println(" C");
202  lcd.setCursor(0,  1);
203  lcd.print("Hum:");
204  //Serial.print("Hum:");
205  lcd.print(DHT.humidity,  1); //print the humidity on lcd
206  //Serial.print(DHT.humidity,1);
207  lcd.print("  %      ");
208  //Serial.println(" %");
209  delay(10000); //wait for 3000 ms
210  lcd.clear(); //clear the LCD
211  delay(200); //wait for a while
212  irrecv.resume();    // Receive the next value
213}
214if (results.value == 0xFF18E7) //if "2"  is pushed print the DARKNESS
215{
216  lcd.clear(); //clear the LCD
217  lcd.setCursor(4,  0); //place the cursor on 4 column, 1 row
218  lcd.print("Darkness:");
219  luce  = analogRead(sensorPin); //read the ldr
220  pluce = map(luce, 0, 1023, 0, 100);  //the value of the sensor is converted into values from 0 to 100
221  lcd.setCursor(6,  1); //place the cursor on the middle of the LCD
222  lcd.print(pluce); //print the  percentual
223  lcd.print("%"); //print the symbol
224  delay(10000); //delay  10000 ms
225  lcd.clear(); //clear the LCD
226  delay(200); //wait for a while
227  irrecv.resume();    // Receive the next value
228}
229if (results.value == 0xFF7A85)  //if "3" is pushed print the SNOW or WATER LEVEL
230{
231  lcd.clear(); //clear  the LCD
232  lcd.setCursor(0, 0); //place the cursor on 0 column, 1 row
233  lcd.print("Fluid  level(mm):"); //print "Fluid level(mm):"
234  int waterValue = analogRead(waterSensor);  // get water sensor value
235  lcd.setCursor(6, 1); //place cursor at 6 column,2  row
236  mmwaterValue = map(waterValue, 0, 1023, 0, 40);
237  lcd.print(mmwaterValue);  //value displayed on lcd
238  delay(10000); //delay 10000ms
239  lcd.clear();  //clear the LCD
240  delay(200);
241  irrecv.resume();    // Receive the next value
242}
243
244if  (results.value == 0xFF9867) //if "PRESENTATION" is pushed print TIME, TEM and  HUM, DARKNESS and S or W LEVEL one time
245{
246  lcd.clear(); //clear the LCD
247  print_time();
248  delay(4000); //delay 10000ms
249  lcd.clear(); //clear the  LCD
250  delay (200); //wait for a while
251
252  //READ DATA of the DHT
253  int  chk = DHT.read11(DHT11_PIN);
254  // DISPLAY DATA
255  lcd.setCursor(0, 0);
256  lcd.print("Tem:");
257  lmVal = analogRead(lmPin);//read the value of A0
258  tem = (lmVal * 0.0048828125 * 100);//5/1024=0.0048828125;1000/10=100
259  lcd.print(tem);//print  tem
260  lcd.print(char(223));//print the unit"  "
261  lcd.print("C      ");
262  // Serial.println(" C");
263  lcd.setCursor(0, 1);
264  lcd.print("Hum:");
265  //Serial.print("Hum:");
266  lcd.print(DHT.humidity, 1); //print the humidity  on lcd
267  //Serial.print(DHT.humidity,1);
268  lcd.print(" %      ");
269  //Serial.println("  %");
270  delay(4000); //wait for 3000 ms
271  lcd.clear(); //clear the LCD
272  delay(200); //wait for a while
273
274  lcd.setCursor(4, 0); //place the cursor  on 4 column, 1 row
275  lcd.print("Darkness:");
276  luce = analogRead(sensorPin);  //read the ldr
277  pluce = map(luce, 0, 1023, 0, 100); //the value of the sensor  is converted into values from 0 to 100
278  lcd.setCursor(6, 1); //place the cursor  on the middle of the LCD
279  lcd.print(pluce); //print the percentual
280  lcd.print("%");  //print the symbol
281  delay(4000); //delay 10000 ms
282  lcd.clear(); //clear  the LCD
283  delay(200); //wait for a while
284
285  lcd.setCursor(0, 0); //place  the cursor on 0 column, 1 row
286  lcd.print("Fluid level(mm):"); //print "Fluid  level(mm):"
287  int waterValue = analogRead(waterSensor); // get water sensor  value
288  lcd.setCursor(6, 1); //place cursor at 6 column,2 row
289  mmwaterValue  = map(waterValue, 0, 1023, 0, 40);
290  lcd.print(mmwaterValue);  //value displayed  on lcd
291  delay(4000); //delay 10000ms
292  lcd.clear(); //clear the LCD
293  delay(200);
294  irrecv.resume();    // Receive the next value
295}
296}
297}
298