Geiger Counter with Arduino Uno

Arduino IDE

Radiation Detector system Kit

Arduino UNO Wifi Rev.2

In this tutorial you will learn how to assemble and use a nuclear radiation detector.You can purchase the Geiger Counter Kit <a href="https://www.banggood.com/Assembled-DIY-Geiger-Counter-Kit-Module-Miller-Tube-GM-Tube-Nuclear-Radiation-Detector-p-1136883.html?rmmds=search&cur_warehouse=CN">here.</a><figure><img src=https://projects.arduinocontent.cc/7242bff2-0ad9-48cb-a13b-2e446d8ab737.jpg /><figcaption> </figcaption></figure>A Geiger counter is an instrument used for detecting and measuring ionizing radiation. Also known as a Geiger–Mueller counter (or Geiger–Müller counter), it is widely used in applications such as radiation dosimetry, radiological protection, experimental physics, and the nuclear industry. Geiger counters are used to detect radioactive emissions, most commonly beta particles and gamma rays. The counter consists of a tube filled with an inert gas that becomes conductive of electricity when it is impacted by a high-energy particle.<h3 >Supplies:</h3>1 x Radiation Detector system Kit1 x GM Tube 1 x Power supply cable 1 x Battery Holder 3 x Jumper Wires 4 x Nuts 1 x Acrylic coverDescription:- Name:Radiation Detector system Geiger tube parameters<ul ><li >diameter:Φ10±0.5mm </li><li >Total length: 90±2mm </li><li >Starting voltage: < 350V Recommended </li><li >operating voltage: 380V </li><li >Extreme operating voltage: 550V </li><li >Medium temperature: -40 ~ 55 ℃ </li><li >Size:108x63x20mm </li></ul> Extra info availabe here: <a href="https://www.banggood.com/Assembled-DIY-Geiger-Counter-Kit-Module-Miller-Tube-GM-Tube-Nuclear-Radiation-Detector-p-1136883.html?rmmds=search&cur_warehouse=CN">https://www.banggood.com/Assembled-DIY-Geiger-Cou... https://www.banggood.com/Assembled-DIY-Geiger-Cou... https://drive.google.com/drive/folders/0B9itH-BnW...</a>Geiger counter at work (copy the following link to the browser to watch): Http://v.youku.com/v_show/id_XNzI3MTU2NzQ0.html<h3 >Step 1: Soldering the Geiger Counter</h3><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/ImHbKBu3xus" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><a href="https://www.youtube.com/watch?v=ImHbKBu3xus&feature=youtu.be">This</a> is a timelapse of the assembly process of the geiger counter.<h3 >Step 2: Using the Geiger Counter With an Arduino</h3><div id="gallery"><img id="gallery" src=https://projects.arduinocontent.cc/603326db-052d-4dc8-878c-b8554724da5a.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/3170ce3b-60e1-4bb5-8c79-c606bc435af9.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/40db54e2-3c9c-4980-9b18-40e046a0f20f.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/5e95b9d8-af00-4296-bdaa-f64c285b1421.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/d247e1bf-4ce2-4a9c-a3fa-638ec4000bb1.jpg /><figcaption> </figcaption><img id="gallery" src=https://projects.arduinocontent.cc/a86dd613-6a18-4773-afb3-959065e4c9ab.jpg /><figcaption> </figcaption></div>Connect P3 GND, 5V, VIN to Arduino GND, 5V, Digital 2 respectively.Then in the arduino IDE software open the file: spi_rad_logger.ino which you could find Be sure to change the Serial.print(cpm) command to Serial.println(cpm) in the void loop(){} for better readability.Upload the program onto the board. Once upload is completed, open the serial port window by clicking on the scope on the upper right corner.Then we’ll get the radiation value displayed in CPM, counter per minutes which could be converted to uSv/h with the index 151(151CPM=1uSv/h for M4011 GM Tube).<figure><img src=https://projects.arduinocontent.cc/83aaec76-9c6d-49a3-af61-91419827ba90.jpg /><figcaption> </figcaption></figure>This tutorial has been produced as part of the DEEDU project, co-financed by the Erasmus + Programme of the European commission. Project n°: 2018-1-FR02-KA205-014144.The content of this publication does not reflect the official opinion of the European Union. Responsibility for the information and views expressed therein lies entirely with the authors. For more information, email us at info@digijeunes.com.