Suitcase with Secrets

1/*
2
3 by Marieke Groothuis
4 This example code is in the public  domain.
5*/
6
7#include <Servo.h>
8
9Servo myservo;  // create servo object  to control a servo
10
11int pos = 0;    // variable to store the servo position
12int  pushButton = 2; //pushbutton is connected to pin 2
13int fsrAnalogPin = 0; // FSR  is connected to analog 0
14int fsrReading;      // the analog reading from the  FSR resistor divider
15
16void setup()
17{
18  Serial.begin(9600);
19  myservo.attach(9);  // attaches the servo on pin 9 to the servo object
20  pinMode(pushButton, INPUT_PULLUP);
21}
22
23void  loop() {
24  int buttonState = digitalRead(pushButton);
25  int fsrReading = analogRead(fsrAnalogPin);  
26  Serial.print("Analog reading = ");
27  Serial.println(fsrReading); // prints  the pressure on the FRS
28  if (buttonState == 1 || fsrReading < 700) { //checks  if the button isn't pressed or if the pressure on the FRS is lower than 700. if  either of those are true, the servo moves to position 200
29    pos = 200;
30    myservo.write(pos);              // tell servo to go to position in variable  'pos'
31    delay(100);
32  }
33  else if (buttonState == 0 && fsrReading > 700  ) { //checks if the button is pressed and if the pressure on the FRS is higher than  700. if both of those are true, the servo moves to position 90
34    pos = 90;
35    myservo.write(pos);              // tell servo to go to position in variable  'pos'
36    delay(100);
37  }
38}

1/*
2
3 by Marieke Groothuis
4 This example code is in the public
5  domain.
6*/
7
8#include <Servo.h>
9
10Servo myservo;  // create servo object
11  to control a servo
12
13int pos = 0;    // variable to store the servo position
14int
15  pushButton = 2; //pushbutton is connected to pin 2
16int fsrAnalogPin = 0; // FSR
17  is connected to analog 0
18int fsrReading;      // the analog reading from the
19  FSR resistor divider
20
21void setup()
22{
23  Serial.begin(9600);
24  myservo.attach(9);
25  // attaches the servo on pin 9 to the servo object
26  pinMode(pushButton, INPUT_PULLUP);
27}
28
29void
30  loop() {
31  int buttonState = digitalRead(pushButton);
32  int fsrReading = analogRead(fsrAnalogPin);
33  
34  Serial.print("Analog reading = ");
35  Serial.println(fsrReading); // prints
36  the pressure on the FRS
37  if (buttonState == 1 || fsrReading < 700) { //checks
38  if the button isn't pressed or if the pressure on the FRS is lower than 700. if
39  either of those are true, the servo moves to position 200
40    pos = 200;
41
42    myservo.write(pos);              // tell servo to go to position in variable
43  'pos'
44    delay(100);
45  }
46  else if (buttonState == 0 && fsrReading > 700
47  ) { //checks if the button is pressed and if the pressure on the FRS is higher than
48  700. if both of those are true, the servo moves to position 90
49    pos = 90;
50
51    myservo.write(pos);              // tell servo to go to position in variable
52  'pos'
53    delay(100);
54  }
55}