Arduino + Geometry Dash!

This is an Arduino joystick(?) controlling 1 of the versions of geometry dash!

Mar 19, 2017

•

10332 views

•

4 respects

communication

processing

Components and supplies

Male/Female Jumper Wires

Resistor 10k ohm

RobotGeek Pushbutton

Arduino UNO

Apps and platforms

Processing

Arduino IDE

Project description

Code

My code

java

The first half is the Arduino code and the 2nd is processing code. The code is C and Java

1int butten = 2;
2
3void setup() {
4  Serial.begin(9600);
5}
6
7void   loop(){
8  int buttenState = digitalRead(butten);
9  Serial.println(buttenState);
10   delay(2);
11}// dab more
12
13//------------------Processing code below, paste   below------
14
15/* (begin) import processing.serial.*;
16Serial myPort;
17int   X=10;
18int Y=200;
19PFont font;
20float inByte;
21void setup(){
22  size(1000,400);
23   font=createFont("Arial-BoldItalicMT-48",50);
24   println(Serial.list());
25    myPort = new Serial(this, Serial.list()[0], 9600);
26   myPort.bufferUntil('\
27');
28}
29
30void   draw(){
31  background(#000000);
32  fill(226,160,18);
33  rect(0,300,1000,100);
34   rect(0,0,1000,100);
35  fill(255,246,0);
36  rect(950,100,50,200);
37  fill(   #00FF00 );
38  rect(X,Y,10,10);
39  X=X+1;
40  if(inByte>=1){
41    Y=Y-1;
42   } else{
43    Y=Y+1;
44  }
45  if(X>950){
46    textFont(font);
47    text("YOU   DID IT!!!",500,200);
48    X=975;
49    Y=200;
50  }
51  if(Y>300||Y<100){
52     text("YOU LOSE!!!",500,200);
53    X=10;
54    Y=200;
55  }
56}
57
58void   serialEvent (SerialcPort) {
59  // get the ASCII string:
60  String inString =   myPort.readStringUntil('\
61');
62
63  if (inString != null) {
64    // trim off   any whitespace:
65    inString = trim(inString);
66    // convert to an int and   map to the screen height:
67    inByte = float(inString);
68    println(inByte);
69   }
70}//dab more
71(end)*/
72

int butten = 2;

void setup() {
  Serial.begin(9600);
}

void   loop(){
  int buttenState = digitalRead(butten);
  Serial.println(buttenState);
   delay(2);
}// dab more

//------------------Processing code below, paste   below------

/* (begin) import processing.serial.*;
Serial myPort;
int   X=10;
int Y=200;
PFont font;
float inByte;
void setup(){
  size(1000,400);
   font=createFont("Arial-BoldItalicMT-48",50);
   println(Serial.list());
    myPort = new Serial(this, Serial.list()[0], 9600);
   myPort.bufferUntil('\
');
}

void   draw(){
  background(#000000);
  fill(226,160,18);
  rect(0,300,1000,100);
   rect(0,0,1000,100);
  fill(255,246,0);
  rect(950,100,50,200);
  fill(   #00FF00 );
  rect(X,Y,10,10);
  X=X+1;
  if(inByte>=1){
    Y=Y-1;
   } else{
    Y=Y+1;
  }
  if(X>950){
    textFont(font);
    text("YOU   DID IT!!!",500,200);
    X=975;
    Y=200;
  }
  if(Y>300||Y<100){
     text("YOU LOSE!!!",500,200);
    X=10;
    Y=200;
  }
}

void   serialEvent (SerialcPort) {
  // get the ASCII string:
  String inString =   myPort.readStringUntil('\
');

  if (inString != null) {
    // trim off   any whitespace:
    inString = trim(inString);
    // convert to an int and   map to the screen height:
    inByte = float(inString);
    println(inByte);
   }
}//dab more
(end)*/

My code

java

The first half is the Arduino code and the 2nd is processing code. The code is C and Java

1int butten = 2;
2
3void setup() {
4  Serial.begin(9600);
5}
6
7void  loop(){
8  int buttenState = digitalRead(butten);
9  Serial.println(buttenState);
10  delay(2);
11}// dab more
12
13//------------------Processing code below, paste  below------
14
15/* (begin) import processing.serial.*;
16Serial myPort;
17int  X=10;
18int Y=200;
19PFont font;
20float inByte;
21void setup(){
22  size(1000,400);
23  font=createFont("Arial-BoldItalicMT-48",50);
24   println(Serial.list());
25   myPort = new Serial(this, Serial.list()[0], 9600);
26   myPort.bufferUntil('\n');
27}
28
29void  draw(){
30  background(#000000);
31  fill(226,160,18);
32  rect(0,300,1000,100);
33  rect(0,0,1000,100);
34  fill(255,246,0);
35  rect(950,100,50,200);
36  fill(  #00FF00 );
37  rect(X,Y,10,10);
38  X=X+1;
39  if(inByte>=1){
40    Y=Y-1;
41  } else{
42    Y=Y+1;
43  }
44  if(X>950){
45    textFont(font);
46    text("YOU  DID IT!!!",500,200);
47    X=975;
48    Y=200;
49  }
50  if(Y>300||Y<100){
51    text("YOU LOSE!!!",500,200);
52    X=10;
53    Y=200;
54  }
55}
56
57void  serialEvent (SerialcPort) {
58  // get the ASCII string:
59  String inString =  myPort.readStringUntil('\n');
60
61  if (inString != null) {
62    // trim off  any whitespace:
63    inString = trim(inString);
64    // convert to an int and  map to the screen height:
65    inByte = float(inString);
66    println(inByte);
67  }
68}//dab more
69(end)*/
70

int butten = 2;

void setup() {
  Serial.begin(9600);
}

void  loop(){
  int buttenState = digitalRead(butten);
  Serial.println(buttenState);
  delay(2);
}// dab more

//------------------Processing code below, paste  below------

/* (begin) import processing.serial.*;
Serial myPort;
int  X=10;
int Y=200;
PFont font;
float inByte;
void setup(){
  size(1000,400);
  font=createFont("Arial-BoldItalicMT-48",50);
   println(Serial.list());
   myPort = new Serial(this, Serial.list()[0], 9600);
   myPort.bufferUntil('\n');
}

void  draw(){
  background(#000000);
  fill(226,160,18);
  rect(0,300,1000,100);
  rect(0,0,1000,100);
  fill(255,246,0);
  rect(950,100,50,200);
  fill(  #00FF00 );
  rect(X,Y,10,10);
  X=X+1;
  if(inByte>=1){
    Y=Y-1;
  } else{
    Y=Y+1;
  }
  if(X>950){
    textFont(font);
    text("YOU  DID IT!!!",500,200);
    X=975;
    Y=200;
  }
  if(Y>300||Y<100){
    text("YOU LOSE!!!",500,200);
    X=10;
    Y=200;
  }
}

void  serialEvent (SerialcPort) {
  // get the ASCII string:
  String inString =  myPort.readStringUntil('\n');

  if (inString != null) {
    // trim off  any whitespace:
    inString = trim(inString);
    // convert to an int and  map to the screen height:
    inByte = float(inString);
    println(inByte);
  }
}//dab more
(end)*/

Downloadable files

The Wiring

This is the same as digital read serial in the Arduino examples

The Wiring

Comments

Only logged in users can leave comments

Cookie555

0 Followers

•

0 Projects

Work attribution

Intro

Trademarks & CopyrightsWhistleblowingDigital Services ActTerms of ServicePrivacy PolicySecurityCookie Settings

Report content