VOICE RECOGNITION ROBOT with XIAO nRF52840 Sense

Graphic OLED, 128 x 64

Arduino IDE

Seeed XIAO BLE nRF52840 Sense

Arduino Nano

<p ></p><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/_ii5chsgqVo" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><p ></p><h3 ><span >🌟 About the Project</span></h3><p >In this project, we will control a simple robot by using voice commands using the XIAO nRF52840 Sense that has a built-in microphone. In this project, we use the micro_speech library, and the received commands are displayed on the old screen.</p><h3 ><span >📷 Pictures</span></h3><figure><img src=https://projects.arduinocontent.cc/1c1d90fa-ef4e-4252-8a6a-43c356627e24.jpg /><figcaption> </figcaption></figure><h3 ><span >🎯 Features</span></h3><ul ><li >4 Different Voice Commands</li></ul><ul ><li >Show all received commands on Oled Display</li></ul><h3 ><span >🧰 Getting Started</span></h3><p >We will use XIAO nRF52840 Sense as a processor. and we will add an OLED display to show received commands. Also with the Help of the DRV8833 Dual Motor Driver Module, we were able to control our DC Motors as Voice Commands were received.</p><ul ><li >XIAO nRF52840 Sense</li></ul><ul ><li >DRV8833 Dual Motor Driver</li></ul><ul ><li >Oled 0.96 SSD1306</li></ul><h3 ><span >🔌 Schematic</span></h3><p >Make the connections according to the table and schematic below.</p><ul ><li >XIAO nRF52840 and DRV8833.</li></ul><p >We Should Connect STBY pin to VCC pin.</p><ul ><li >Complete Schematic</li></ul><figure><img src=https://projects.arduinocontent.cc/b83e1180-4a2e-4ecc-99f7-335c82e92e04.png /><figcaption> </figcaption></figure><h3 ><span >⚙️ Installation</span></h3><p >Before uploading the code you need to install the required library in Arduino IDE. Follow these steps:</p><ul ><li >Follow this path Sketch> Include Library> Manage Libraries</li></ul><ul ><li >Search for Adafruit SSD1306</li></ul><ul ><li >Install the library</li></ul><p >-Then search for the “GFX” and install it also.</p><h3 ><span >👀 Usage</span></h3><p >After completing all the steps, the robot moves by receiving voice messages and the received messages are displayed on the screen.</p>

VOICE RECOGNITION ROBOT with XIAO nRF52840 Sense

In this project, we will control a simple robot by using voice commands using the XIAO nRF52840 Sense which has a built-in microphone.