I Upgrade my Esp32-cam

Arduino IDE

ESP32S

Arduino Nano

<p ></p><div class="se-component se-video-container __se__float-none" contenteditable="false" style="width: 100%;"><figure style="width: 100%; height: 56.25%; padding-bottom: 56.25%; margin: 0px;"><iframe frameborder="0" allowfullscreen="" src="https://www.youtube.com/embed/kIOtrVXuUg8" data-proportion="true" data-percentage="100%,56.25%" data-size="100%,56.25%" data-align="none" style="width: 100%; height: 100%;" data-index="0" data-file-size="0" data-origin="100%,56.25%"></iframe></figure></div><p >if you have ever worked with eap32cam, you know even for thebasic needs like uploading the code, there is lot of wiring</p><p >so like every other engineer which facing difficulty, Ishould solve this problem</p><p >which starts with designing a shield for esp32cam</p><p >after a few months, I came up with this design, which allowus to</p><ul ><li >uploading codes without pain and unnecessary wiring </li><li >charging batteries</li><li >easy access to all the gpio</li><li >and other features like separated i2c connection for OLEDdisplay and a neopixel led</li></ul><p >for the USB to TTL circuit which is able to upload the codedirectly to the esp32 chip. I used cp2102 also I could use a ch340 chip but forthis project, I was looking for quality rather than a good price.</p><p >part of this project is charging the battery, so for thispart, I used tp4056.</p><p >usually, you seen this chip on the battery charger module</p><p ></p>

I Upgrade my Esp32-cam

If you have ever worked with eap32cam, you know even for the basic needs like uploading the code...