A treat dispensing dog-cam

1//include the servo library
2
3#include  <Servo.h>
4
5//create
6  a servo object called servo1 Servo servo1;
7Servo servo1;
8
9void setup()
10  { 
11
12// put your setup code here, to run once:
13
14// set the servo pin,
15  pin 9, as an servo output pin servo1.attach(9); }
16 servo1.attach(9);
17 }
18void
19  loop() {
20  // put your main code here, to run repeatedly:
21
22int lightValue
23  = analogRead(A0);
24
25// map the light readings to the angle possible by the
26  servo motor lightValue = map (lightValue, 0, 1023, 0, 180);
27lightValue = map(lightValue,
28  0, 1023, 0, 180);
29
30if(lightValue>99
31)
32{
33servo1.write(30);
34}
35
36  else
37    
38servo1.write(0);
39}

1//include the servo library
2
3#include  <Servo.h>
4
5//create  a servo object called servo1 Servo servo1;
6Servo servo1;
7
8void setup()  { 
9
10// put your setup code here, to run once:
11
12// set the servo pin,  pin 9, as an servo output pin servo1.attach(9); }
13 servo1.attach(9);
14 }
15void  loop() {
16  // put your main code here, to run repeatedly:
17
18int lightValue  = analogRead(A0);
19
20// map the light readings to the angle possible by the  servo motor lightValue = map (lightValue, 0, 1023, 0, 180);
21lightValue = map(lightValue,  0, 1023, 0, 180);
22
23if(lightValue>99
24)
25{
26servo1.write(30);
27}
28  else
29    
30servo1.write(0);
31}