Password Typer

Tape, Clear

Plastic Enclosure, Project Box

Drill / Driver, Cordless

Arduino Leonardo

USB-A to Micro-USB Cable

Hot glue gun (generic)

Arduino IDE

Passwords can be tiring to type in. This gadget types in passwords for you!First, drill two holes in the enclosure - one for the USB connector and one circular hole on the front. <figure><img src=https://projects.arduinocontent.cc/cebc2d65-6d20-4e6a-8aa5-3a7f2cf1ac62.jpg /><figcaption> </figcaption></figure>Next, for convenience, tape one side of the box shut so that it opens like a flap. Then, using hot glue, stick the Arduino Leonardo down inside the box, its USB port in sight through the USB hole (also make sure it is reachable by a USB cable). <figure><img src=https://projects.arduinocontent.cc/fda09ae3-717a-4af7-94dc-02364e281d1f.jpg /><figcaption> </figcaption></figure>Let's code!Plug the Arduino Leonardo into your computer via USB. Then download the Password_Typer.ino sketch. Replace &#34;apassword&#34; with your password. Upload the sketch to your Arduino then unplug the cable so it doesn't start typing in passwords! Then, navigate to the place where you want to type in your password then plug the Arduino back in. Your password should be typed!<figure><img src=https://projects.arduinocontent.cc/a9c71660-bb1d-4e4c-8f43-4afaedc1b721.jpg /><figcaption> </figcaption></figure> Then, if you want to close your enclosure, then tape the other side or put in screws (I taped it because I couldn't find the right screws).<figure><img src=https://projects.arduinocontent.cc/16bd6888-10e8-4e31-8ede-de5a602ef4b4.jpg /><figcaption> </figcaption></figure>And we're done! Plug in the Arduino and watch your password appear!<figure><img src=https://projects.arduinocontent.cc/7f83685c-9b11-43b6-8555-abd3a9c28746.jpg /><figcaption> </figcaption></figure>

Password Typer

Tired of typing in passwords? This gadget does it for you!