Real Time Clock (RTC) PCF8563

1/* Demonstration of Rtc_Pcf8563 Set Time. 
2 * Set the clock to a time  then loop over reading time and 
3 * output the time and date to the serial console.
4  *
5 * I used a RBBB with Arduino IDE, the pins are mapped a 
6 * bit differently.  Change for your hw
7 * SCK - A5, SDA - A4, INT - D3/INT1
8 *
9 * After loading and  starting the sketch, use the serial monitor
10 * to see the clock output.
11 * 
12  * setup:  see Pcf8563 data sheet.
13 *         1x 10Kohm pullup on Pin3 INT
14 *         No  pullups on Pin5 or Pin6 (I2C internals used)
15 *         1x 0.1pf on power
16 *         1x  32khz chrystal
17 *
18 * Joe Robertson, jmr
19 * orbitalair@bellsouth.net
20 */ 
21#include  
22#include 
23
24//init the real time clock
25Rtc_Pcf8563 rtc;
26
27void setup()
28{
29  //clear out the registers
30  rtc.initClock();
31  //set a time to start with.
32  //day, weekday, month, century(1=1900, 0=2000), year(0-99)
33  rtc.setDate(14,  6, 3, 1, 10);
34  //hr, min, sec
35  rtc.setTime(1, 15, 0);
36  Serial.begin(9600);
37}
38
39void  loop()
40{
41  //both format functions call the internal getTime() so that the 
42  //formatted strings are at the current time/date.
43  Serial.print(rtc.formatTime());
44  Serial.print("\
\
45");
46  Serial.print(rtc.formatDate());
47  Serial.print("\
\
48");
49  delay(1000);
50}
51
52
53
54